
LUMENKORN
Film camera with a darkroom
0 ratings
Free
Rating summary
About
Every photograph LUMENKORN takes keeps its undeveloped negative. Change the film afterwards and that negative is developed again — a frame shot on black-and-white can become colour days later. An app that lays a filter over a finished JPEG cannot do this.
LUMENKORN is a 35mm film camera and a darkroom: sixteen films of its own, a development pipeline that works the way emulsion works, and the controls of a real camera body.
THE FILMS
Ten colour films and six monochromes — the names are LUMENKORN's own — each an original built from measurement: curves, colour response and grain fitted to real developed film, scanned at a photo lab. Skin sits warm and smooth without going orange. Skies come down cyan-blue with weight in them, not phone-blue. Greens go muted or go loud depending on the roll you load. Reds stay dense where a phone lets them bleed. Fast films are coarse and low in contrast; slow films are tight and steep. Every film carries honest variants (matte, pushed), a continuous printing-warmth dial for colour, a paper-grade contrast scale from 0 to 5 for black & white, and its own grain character.
DEVELOPED, NOT FILTERED
• The negative is kept in linear light and developed in a chain, in order: exposure, film curve, colour response, scan, grain, halation — the way a lab does it, not a lookup laid over a JPEG
• Highlights roll off on a film shoulder. A bright window keeps its gradation; a white shirt in sun keeps its weave
• The camera watches the live histogram and, when real area starts to clip, exposes down by up to two stops and returns them in development — a sunny sky keeps its drawing at 0 EV, and the frame still lands at the exposure you set
• Four scanner profiles decide how the negative is read: two fitted to real lab scans, one a flatbed, one a drum. Same negative, four different prints
• Grain is not noise laid on top. A synthesised emulsion sheet with a real particle-size distribution sits in the negative. It lives in the midtones and thins in the highlights, the way silver does. Zoom in and it reads like a scan, because it is built like one. Choose the 35mm negative or the quieter 120
• Halation blooms around clipped lights only — a street lamp at night gets its ring, a white wall in daylight does not
• The meter reads a third of a stop under. Digital keeps its shadows and loses its highlights — the opposite of film — so the sensor is protected at the top and the film shoulder gives the mids back in development
• Film-true white balance presets: daylight film renders golden hour golden and shade blue
• THE LAB, if you want it: automatic per-shot development that judges each frame the way a lab operator judges a roll — point, shoot, and the print comes back right
A CAMERA, NOT AN APP
• Full-resolution capture on the physical lenses — up to 48 MP, including in manual mode
• M mode: shutter and ISO dials with a live match-needle meter; loading a film rates the meter at its box speed
• EV wheel in quarter stops, AE/AF lock, tap to meter a point
• Lenses from 13 to 200 mm that snap to the real glass
• Frames: 3:2, 4:3, 1:1, 16:9, a widescreen letterbox and a long panorama
• Every capture keeps its undeveloped negative on a roll — re-develop any photograph with a different film later, or press AUTO in the editor for a complete film reading of that image, and again for the next
• Import any photograph from your library and develop it on film — the same pipeline, the same negative kept
• A full develop kit in the editor: exposure, highlights, shadows, white balance, saturation, sharpness that can go soft, real vignetting in both directions, undo and redo
• JPEG, HEIF, or PRO: the developed photo and the untouched ProRAW original in one Photos asset
• Camera Control and Lock Screen capture, volume-button shutter, level, grid, live histogram
NOTHING LEAVES YOUR PHONE
No account, no tracking, no network access at all. Your photographs are yours.
Show more
What's New in LUMENKORN
1.0
September 15, 2026





