Pipe Calc Elite

NEW • Threaded elbow take-outs: Class 150 and 300 malleable iron (ASME B16.3) with the matching Class 125 and 250 cast iron (ASME B16.4), and Class 3000 and 6000 forged steel (ASME B16.11), with take-out, cut length and thread make-up. • Valves and fittings in pressure loss: ten fittings, from 90 and 45 elbows to gate, globe, angle and swing check valves, with ASHRAE loss coefficients by pipe size and joint type, on Colebrook-White friction, the basis of the Moody chart. • Water temperature: enter 32 to 212°F, from chilled to boiler water, and pressure loss uses the viscosity at that temperature. • When the fittings are longer than the centerline allows, the cut length shows "Short By" and the amount, so you know how much to change. • Stored values are saved between launches, and a recalled value can start or finish a calculation. • Hold for help: hold Offset, Travel, Convert or any other function key for about a second and the manual opens at that key's section, with its worked examples. IMPROVED • Switching pipe material keeps your pipe type when the new material offers it, such as Schedule 80. • A new dark design for every picker and results sheet, with support for larger text sizes. • An updated user's manual that covers every key, built in under Help.