SawPilot: Cut List Optimizer

You have a list of parts and a stack of sheets. SawPilot works out how to cut them with as little waste as possible, and shows you exactly which cut comes when. WHAT IT DOES Enter your parts, pick your material, and you have a cut plan. With the blade width worked in, edge banding accounted for, and the grain direction respected where it matters. You see what comes out of each sheet, how much of it you use, and what is left over. THREE KINDS OF WORK Bars are cut to length. Sheets are cut in two directions, with as little waste as possible. Beams go in three dimensions, where an offcut may go back into the saw. IN THE WORKSHOP Saw mode gives you one cut at a time: the fence setting, which side to measure from, and what you are left with. Big enough to read from the machine, and you tick off what is done. WHAT COMES OUT A PDF with the drawing, the cut sequence and the parts list. An order list for your supplier, with amounts. Labels to stick on each piece as it comes off the saw. CALCULATING IS ALWAYS FREE As many cut plans a day as you like, without an account, without ads. What you enter stays on your own device until you create an account yourself. Free keeps three projects, with thirty part rows and two materials per project. WITH PRO Unlimited storage, beams in three dimensions, your own name and logo on the PDF, your customer's details on the plan, order lists, labels, an offcut rack across projects, and importing and exporting lists. Pro is € 7.99 a month or € 59 a year. The first month is free and you can cancel any time. You can also use SawPilot at sawpilot.app, with the same account. Terms of Use: https://sawpilot.app/voorwaarden