Every STL file says “Process Failed” HELP
Every file I have will not load the app says “Processing failed” check you have a valid ATL file. I downloaded all files from Thingaverse which this App required.
Reddit users have had the same issue with prints they have already used before.
Reddit users have had the same issue with prints they have already used before.
Software
100% of their problems could be fixed with an update and adding a few features that they refuse to do for some reason
App problems after iOS 15.6 installed
The upload file, edit preview is broken after the update was installed. Opened a ticket with support.. no answer back.
Ugh, really? App doesn’t work.
Successfully logged into Thingiverse after a lot of failed attempts but the app itself WILL NOT WORK. I’ll click on an item and it just gives me the same blank screen every time. I haven’t even received the Sculpto printer yet and now I’m super worried it was a waste of money because of the app being such a pain already. Hoping it prints okay. Not feeling super hopeful.
Show more
This thing is a pain to connect to the internet
Almost every time I try to print something I need to stop it or turn it off, and when you turn it off you need to reconnect it to the internet and 99% of the time it takes at least half an hour or more and half the time I give up
Could Use some work, but manageable
It’s not THAT bad. Just requires a lot of patience. Hardware seems very out of the box and go, but software isn’t quite that way yet. However after learning my way around the bugs and whatnot, it’s easy to use.
Horrible App
Using the app is horrible. Took forever to get the app connected to the printer, and when I couldn’t get the filament to feed into the printer, the FAQ says to reset by turning the printer off. But then, I was locked out of the app. Now, I can’t even log back into the app, or create a new account.
I’m over this app and the printer. I wish I had read the reviews here first.
I’m over this app and the printer. I wish I had read the reviews here first.
Show more
Works but needs detailed tutorial
The only challenging part of this plug and play printer is the WiFi setup. It must be over a 2.4gHz connection and more importantly and NOT documented is it doesn’t use the highest security connection.
Uses WPA or lower/none iirc? I found this detail on a YouTube comment on one of their non setup vids!
If you don’t have access to edit your internet connection if needed this is a cheap accent piece.
In regards to printing I would upload atlas files directly to the printer. It can use thingiverse to get models but sadly that giant database is poorly optimized that its a running joke. Sadly Sculpto doesn’t display all the info on said thingiverse pages such as remixes. Use a thingiverse viewer like 3dgeeks to get files to print or avoid thingi altogether.
You can print from the app or from your printers WiFi page. Get the link from sculpto faq page footer.
To print gcode files you must use that printer website. Using gcode also..voids your warranty. Remember this is geared to novices who might not know how to slice.
Happy printing and check out the 3D printing reddit or discord for help and tips
Uses WPA or lower/none iirc? I found this detail on a YouTube comment on one of their non setup vids!
If you don’t have access to edit your internet connection if needed this is a cheap accent piece.
In regards to printing I would upload atlas files directly to the printer. It can use thingiverse to get models but sadly that giant database is poorly optimized that its a running joke. Sadly Sculpto doesn’t display all the info on said thingiverse pages such as remixes. Use a thingiverse viewer like 3dgeeks to get files to print or avoid thingi altogether.
You can print from the app or from your printers WiFi page. Get the link from sculpto faq page footer.
To print gcode files you must use that printer website. Using gcode also..voids your warranty. Remember this is geared to novices who might not know how to slice.
Happy printing and check out the 3D printing reddit or discord for help and tips
Show more
Unable to Login
I created a username at Thingiverse, but it doesn’t work. I can’t login to the site at all.
Bad
Terrrible
Connecting to Thingiverse
Still major issues connecting to Thingiverse. Recent bug fixes were not resolved and cannot print via the app at all. Very dissatisfied.
Thingiverse login is fixed
I was able to login to thingiverse after the update.
Great Easy Setup
I purchased the Sculpto Pro 2 printer for my daughter. While waiting for the printer I had issues for a week trying to log into thingiverse. I emailed the Sculpto Support team Friday afternoon, Saturday I sent them the requested information, and first thing Monday morning they had my issue resolved. Seems like a great app so far.
Show more
DOES NOT WORK!!! Zero stars!!
I was looking to purchase this printer, but wanted to see how the app worked first... thank god I did. I can sign in to Thingiverse no problem, but when the app tries.....nada. It hangs forever. So get this fixed and I will consider changing this review/ rating.
Well it’s nice if you want a paper weight
I’ve been trying to get it to take the filament and it just won’t can’t open the access panel to see if there’s anything wrong because they have the screws on so tight you need some sort of power tool to open it. Well at least I know now, I’m glad I got it on sale so I’m only out $100. It’s worth the extra money to get one that might actually print.
Show more
App is garbage.
The app can’t connect to Thingiverse. I am waiting for this to ship but wanted to look at App. Hope this is not how the printer works not a fan of throwing away money. This is upsetting. Can’t connect to the sight they ask you to set up too. I already have an account with Thingiverse and it will not connect. Can’t see anything else that this printer can do. The website is not that special. I may just ask to cancel order this is not cool
Show more
Loads and loads of wait time
The idea and premise to the design is great, and set-up well, however; it is god-awful in its execution. There has been a terrible amount of waiting as the screens have to load every single time you switch between one app or the other.
I have had landline connections that worked better
Alright - so I bought the Sculpto 3D printer on an insane sale (it was $99 ) And my husband and I were stoked because we have been wanting a 3D printer but they are stupid expensive. I guess that should have been my first clue
I honestly cannot even tell you if the 3D printer itself is actually good or if it actually works because I cannot actually get the app to function properly. It took me about an hour to make an account. Then it refused to let me log in to the second site it demands you log into.
In my honest opinion if you are considering buying this product just download the app before spending the money. If you cannot get the app to work consistently do not even bother buying the 3D printer.
I would rather call a fax machine and let it scream in my ear than fight with this app and as of right now my 3D printer is being returned and I will never buy this product again unless magically the application support comes into play.
I honestly cannot even tell you if the 3D printer itself is actually good or if it actually works because I cannot actually get the app to function properly. It took me about an hour to make an account. Then it refused to let me log in to the second site it demands you log into.
In my honest opinion if you are considering buying this product just download the app before spending the money. If you cannot get the app to work consistently do not even bother buying the 3D printer.
I would rather call a fax machine and let it scream in my ear than fight with this app and as of right now my 3D printer is being returned and I will never buy this product again unless magically the application support comes into play.
Show more
Doesn’t work. Connection issues.
I bought this printer to get into the hobby. This printer first connect no issues. After 1 print we can’t get the app to work and it flashes yellow. The app does not display anything like it’s not responding. The WiFi does work because everything else in my house is working. I think the app or website needs a update. I will change my stars if this gets fixed.
Show more
Thingiverse
Really hate having to run from room to room to use it because I can’t log into thingiverse from the app. Fix it and I’ll definitely go up in stars but right now the core reason I purchased this specific model isn’t working. Kind of want to return it.
Edit: Support immediately fixed my issue and it works perfectly now.
Edit: App won’t do anything now. Back to issues and connection problems. Returning item.
Edit: Support immediately fixed my issue and it works perfectly now.
Edit: App won’t do anything now. Back to issues and connection problems. Returning item.
Show more
