ShinerCore Remote

ShinerCore Remote

by Nevyn Bengtsson

0 ratings
Free

Rating summary

Details

Released
March 19, 2025
Updated
November 3, 2026

Features

ShinerCore Remote screenshot #1 for iPhone
ShinerCore Remote screenshot #2 for iPhone
ShinerCore Remote screenshot #3 for iPhone
ShinerCore Remote screenshot #4 for iPhone
ShinerCore Remote screenshot #5 for iPhone
iphone
ipad
🖼️Get Icon
Icons↘︎

About

Control your ShinerCore open source RGB LED contraptions over Bluetooth. Nearby cores show up in a list; pick one and shape its animation: five presets, ten layers, two colors per layer, blend modes, patterns, and speed in seconds per cycle — or in beats, using the core's microphone for beat detection, where the speed snaps to musical values from a quarter beat up to sixteen. Changes apply as you drag, and the app follows along live when the core changes state. The Wiring tab draws your board and gives every pin a job: a switch that holds the lights or a preset, a button that steps through presets, a knob that rides brightness, or the LED strip itself. Pins the speaker or microphone already claim show as taken, and each pin offers only the roles the firmware allows on it. Switches and buttons report their state as you flip them, so you can check your soldering from the couch. A separate tab covers the core itself: brightness, LED count, color order, and a power cap that dims bright frames to fit the current your battery can actually give. Cores also talk to each other: nearby cores link up over their own radio mesh and can play a shared show, cycling through presets in sync — no phone needed once it's playing. Note: hardware required. ShinerCore is open source ESP32 firmware for addressable LED strips (NeoPixel and friends) — build your own at github.com/nevyn/shinercore.
Show more

What's New in ShinerCore Remote

2.0

November 3, 2026

A new way to play. The app now opens on Play: power, brightness, presets and every layer of your show, with a live preview of the whole strip at the top. • See all your layers at once, each with its own little preview. Drag to reorder, swipe to remove, tap to edit. • The layer editor shows every animation running in your colors, so you can pick by eye, and each layer has its own opacity. • Settings you set once live in Setup. • No core yet? Try the demo core and play with every screen, or follow the new build guide to wire an LED strip to a board. • The Wiring tab now draws the M5StickC Plus too. • Cores with older firmware keep working; update them for the layer stack and opacity.

More