Terrible app support
Doesn’t save presets, won’t let you select color palettes. Useless without a functioning app
Give us more options please
I LOVE my glorbs and I have gifted a few but the app needs some work. I try to add to my library and it never shows up. The options are good but I wish there were more and a way to adjust more of the settings
New update freezes?
New update causes everything in my library to pause and then suddenly move for a couple of seconds then freeze again.
Mies…
Die app ist leider einfach scheußlich! Der glorb wird in nur 2 von 5 Fällen überhaupt gefunden. Wenn ein Einstellung verändert wird friert er erstmal für 30 Sekunden ein (was sowieso 3-4 mal die Stunde passiert. Widgets werden noch nicht einmal ordentlich dargestellt geschweige denn das sie funktionieren. Es steht einfach dauerhaft „no device“ dort obwohl ich den glorb schon mehrfach ausgewählt habe. Presets laden einfa 5 min um am Ende nicht zu funktionieren. Software Update bringt auch nach mehrfachen neu installieren keine Besserung. Wirkt schlampig und lustlos bin sehr enttäuscht. Ne Lampe für knapp 200€ die, die meiste Zeit einfach nur blau leuchtet weil sie sich mal wieder selbst ein reset verpasst hat…..
Show more
Control
Love the lights but they random turn on and you can’t always turn them off with the app
Gemischte Gefühle
An sich ist der Glorb eine cooles Leuchtmittel, jedoch befindet sich die Software definitiv noch in einem Anfangsstadium. Ich liste hier mal einige Probleme auf die sowohl die App als auch die Firmware betreffen:
1. Sync funktioniert oft nicht bzw. einzelne Glorb reagieren nicht
2. Glorb schaltet sich von alleine einfach an
3. Glorb verliert gelegentlich das WLAN
4. Es werden nicht alle Glorb in der App erkannt
5. In der App reagieren die Knöpfe nicht bzw. der Glorb reagiert nicht entsprechend. Oft hilft hier dann nur ihn vom Strom zu nehmen was bei einer Deckenmontage nervig sein kann
6. „Sound Reactive“ funktioniert nahezu gar nicht
7. SmartHome Integration nicht existent, die HP sagt auch „in Bearbeitung“
Warum ich ihm dennoch 3 Sterne gebe? Es ist ein Startup und ein super freundliches Team die alles versuchen um den Bogen zu bekommen. Wenn alle Lampen dann mal wirklich wie gewünscht laufen ist es einfach schön.
1. Sync funktioniert oft nicht bzw. einzelne Glorb reagieren nicht
2. Glorb schaltet sich von alleine einfach an
3. Glorb verliert gelegentlich das WLAN
4. Es werden nicht alle Glorb in der App erkannt
5. In der App reagieren die Knöpfe nicht bzw. der Glorb reagiert nicht entsprechend. Oft hilft hier dann nur ihn vom Strom zu nehmen was bei einer Deckenmontage nervig sein kann
6. „Sound Reactive“ funktioniert nahezu gar nicht
7. SmartHome Integration nicht existent, die HP sagt auch „in Bearbeitung“
Warum ich ihm dennoch 3 Sterne gebe? Es ist ein Startup und ein super freundliches Team die alles versuchen um den Bogen zu bekommen. Wenn alle Lampen dann mal wirklich wie gewünscht laufen ist es einfach schön.
Show more
The glorb works but...
The app seems to work to make the glorb work with the different light patterns, but it is not possible
to set up the timer switch it on and off at certain times (which is annoying since the option is there).
to set up the timer switch it on and off at certain times (which is annoying since the option is there).
Ok but needs improvement
Turns the glorb on and off and has some good presets but has some issues. the schedule does not work. You can set on and off times but the glorb doesn’t seem to pay any attention. The schedule doesn’t always stick.
Also the glorb doesn’t always turn on and off using the app and there can be a delay
Good first attempt but needs work to fit into a house full of Alexa’s or home hubs or govee/ hue ecosystems
Also the glorb doesn’t always turn on and off using the app and there can be a delay
Good first attempt but needs work to fit into a house full of Alexa’s or home hubs or govee/ hue ecosystems
Show more
Muss verbessert werden
Der Glorb als Lichtobjekt ist gut designed. Die App bzw. die Firmware ist sehr fehlerhaft. Der Wechsel der Einstellungen klappt häufig nicht. Das muss schnell besser werden.
Zufrieden. Ich liebe den Glorb!!
Mir taugt die App, sie steuert den glorb an und ist intuitiv nutzbar. Die Möglichkeiten welche die App bietet sind ausreichend, auch wenn es immer jemanden geben wird dem etwas fehlt. Man kann zwischen verschiedenen Einstellungen wählen und eigene Presets und Listen erstellen. Für jeden was dabei.
Grundsätzlich funktioniert die App und Synchronisiung reibungslos.
Bin FAST vollkommen zufrieden. Kleine Baustellen sind z.b. dass man eigene presets nur auf seinem Gerät nutzen kann und wenn man ein anderes WLAN einrichtet, ist es nicht 100% beim ersten neuen Verbinden so möglich. Aber wenn der glorb läuft, top!
Grundsätzlich funktioniert die App und Synchronisiung reibungslos.
Bin FAST vollkommen zufrieden. Kleine Baustellen sind z.b. dass man eigene presets nur auf seinem Gerät nutzen kann und wenn man ein anderes WLAN einrichtet, ist es nicht 100% beim ersten neuen Verbinden so möglich. Aber wenn der glorb läuft, top!
Show more
Nice basic app, but timer needs work
The app is pretty basic, but I appreciate that it both has preset configurations, but also allows you to mix and match between the patterns and the color palettes.
The timer doesn’t seem to work right though. Maybe if you use the preset times, But those tend to be only a few minutes. I wanted to set a timer when I turn it on so it doesn’t run all night, and there are dials to set 12+ hours as well as 0-59 minutes. When it try to set a timer to 12 hours, it always ‘self-adjusts’ back down to 4 hour and 15 minutes, even if I’ve previously set the minutes to 0 or something else.
I’ll admit I’m both an engineer and a good so I notice 4 hours 15 minutes is 255 minutes, and 255 is the limit for a byte. It makes me think that the timer spinners in the interface try to store data into a single byte, which detects the overflow and student at 255 minutes, or 4 hours 15 minutes.
I can actually sry the timer for any time up to 4 hours 15 minutes, but any hours higher than 4 self-adjust down to 4, and trying to set 4 hours 16+ minutes adjust down to 4 hours 15 minutes.
Give us another byte for the timer, guys!
The timer doesn’t seem to work right though. Maybe if you use the preset times, But those tend to be only a few minutes. I wanted to set a timer when I turn it on so it doesn’t run all night, and there are dials to set 12+ hours as well as 0-59 minutes. When it try to set a timer to 12 hours, it always ‘self-adjusts’ back down to 4 hour and 15 minutes, even if I’ve previously set the minutes to 0 or something else.
I’ll admit I’m both an engineer and a good so I notice 4 hours 15 minutes is 255 minutes, and 255 is the limit for a byte. It makes me think that the timer spinners in the interface try to store data into a single byte, which detects the overflow and student at 255 minutes, or 4 hours 15 minutes.
I can actually sry the timer for any time up to 4 hours 15 minutes, but any hours higher than 4 self-adjust down to 4, and trying to set 4 hours 16+ minutes adjust down to 4 hours 15 minutes.
Give us another byte for the timer, guys!
Show more
