Terrible
This app is ridiculous! It does nothing to control the fan - so sorry I bought this product! In this day and age a make an app that works!!!!!
Veent pairing
The Veent app and fan are great when the fan is paired to the switch, but sometimes they need repairing (e.g., after blackouts, when replacing battery) in order for the fan and app to be helpful.
The following info is very important to Veent owners, but not readily available, so copy to someplace important.
To pair the Switch and grille please follow all steps:
The instructions are:
You will need a paper clip.
1) Cycle the power to the fan (turn the breaker off and then on)
2) On the back of the wall switch there is a battery compartment. Open battery compartment and remove the battery for 15 seconds or longer (to reset the switch) and then re insert the battery.
3) Remove the grille from the fan housing but make sure the cable remains plugged in between the grille and fan housing. On the back side of the grille near the center locate the small paperclip size hole. There is a button inside. Use the paperclip to press and hold the button form 20 seconds, then release. Use the paper again to press the same button 5 times. Then press the large button on the wall switch 5 times. You have about 20 seconds between pressing the grille button with the paper clip and the large switch button.
4) Try the light, max fan and fan buttons on the switch. They should now work. If it does not connect the first time please try again it will connect. (No need to remove the battery again or cycle power at the breaker box but must be done once). It may be a little easier if you have one person at the grille and one person at the switch.
Good luck!
The following info is very important to Veent owners, but not readily available, so copy to someplace important.
To pair the Switch and grille please follow all steps:
The instructions are:
You will need a paper clip.
1) Cycle the power to the fan (turn the breaker off and then on)
2) On the back of the wall switch there is a battery compartment. Open battery compartment and remove the battery for 15 seconds or longer (to reset the switch) and then re insert the battery.
3) Remove the grille from the fan housing but make sure the cable remains plugged in between the grille and fan housing. On the back side of the grille near the center locate the small paperclip size hole. There is a button inside. Use the paperclip to press and hold the button form 20 seconds, then release. Use the paper again to press the same button 5 times. Then press the large button on the wall switch 5 times. You have about 20 seconds between pressing the grille button with the paper clip and the large switch button.
4) Try the light, max fan and fan buttons on the switch. They should now work. If it does not connect the first time please try again it will connect. (No need to remove the battery again or cycle power at the breaker box but must be done once). It may be a little easier if you have one person at the grille and one person at the switch.
Good luck!
Show more
Dysfunctional
The app is simplistic at best. The fan/switch interface sporadically works. The app/fan interface sporadically works. Not dependable. Do not recommend.
Replacing battery hard to sync.
Works great till it doesn’t. For some reason I have to completely remove switch from wall wiring for it to try to sync. App layout stinks. This company definitely needs a new staff. Gunning for failure seems to be the goal.
Awefull
App app is okay the fan is terrible so many problems
