Water Eject Speaker Clean

Water in your iPhone speaker? If the sound is muffled, Water Eject plays a 15-second low-frequency sound sweep to help push water from the main speaker grille. How it works 1. Turn your volume all the way up. 2. Hold your iPhone with the main speaker facing down. 3. Place a paper towel underneath. 4. Tap Eject Water. The app plays a 200 Hz to 120 Hz sound sweep for 15 seconds. The speaker membrane vibrates during the sweep, helping push water droplets out through the grille. When the session ends, listen to your speaker. If it still sounds muffled, you can run the session again. Designed to run when it matters Water Eject will not start when headphones or an external audio output is connected. It also warns you when the volume is too low for the sweep. If an audio interruption occurs, such as a phone call, the session stops. What it does not do Water Eject cannot detect whether water is present and cannot measure whether the process worked. Your own ears are the only way to tell if the speaker sounds clearer. It helps push water from the main speaker. It does not clean the earpiece, charging port, or microphone. It is not waterproofing, a moisture sensor, or a repair. If your iPhone has sustained water damage or the speaker remains affected, seek appropriate service. One purchase. No subscription. Water Eject is a one-time purchase. There is no subscription, no advertising, and no account required. Open it when you need it, run the 15-second sweep, and check the sound. Terms of Use: https://barissemerci.github.io/water-eject/terms/