PIDTune vs Megatuner

PID Tuner uses the IMC (Internal Model Control) method to calculate PID tuning parameters. I’ve tried a lot of tuning methods over the years and have found this one to be the best. The app is written for the iPad to show all the information on one page. The program calculates: PID Parameters: Controller Gain (Kc) Integral Time (Ti) Derivative Time (Td) For process types First Order with Dead Time (FO) Second Order with Dead Time (SO) Integrating or Long Time Constant with Dead Time (I) For controller types Parallel (non-interacting) c(s) = Kc (1 + 1/(Ti s) + Td s) Series (interacting) c(s) = Kc (Ti s + 1)/(Ti s)(Td s + 1) For controller modes PID PI You can either enter the process gain (Kp) directly or enter the changes in the controlled virable (CV) and manipulated variable (MV). Tuning aggression is adjusted using the slider to set the closed loop time constant to the process time constant ratio (λ/Ƭ). The closed loop time constant (λ) is the time the controller is expected to reach set point (plus the dead time (ϴ)). Setting the closed loop time constant to process time constant ratio (λ/Ƭ) to 1.0 will make the MV change to its final value and allow the process to settle out to the setpoint. Setting (λ/Ƭ) greater than 1.0 will give a slower responce. Setting (λ/Ƭ) less than 1.0 will cause the MV to make a larger change and then reduce to its final value. Tight tuning would be to set the close loop time constant to the dead time. Use the Integrating Process type (Ƭ = ∞) for both integrating processes or processes with long time constants. These processes use the maximum slope as the process gain. Tuning aggression for these processes is determined by setting the closed loop time constant to the dead time ratio (λ/ϴ). Once again, setting the closed loop time constat to the dead time gives tight control. References: “Probably the test simple PID tuning rules in the World,” Sigurd Skogestad, Jounal of Process Control, July 3, 2001 “Consider the generalized IMC-PID method for PID controller tuning of time-delay processes,” Y. Lee, S. Park, M. Lee, Hydrocarbon Processing, January 2006

Introducing our powerful PI/PID controller tuner app for iOS. Our app makes it easy for you to tune your PI/PID controller using data from your control loop experiments. Our advanced algorithms analyze the data to help you find the optimal settings for your controller, ensuring optimal performance and stability. But that's not all. With our app, you can now convert your settings to over 20 different DCS vendors, making it easier than ever to integrate your control loop with the rest of your process control system. Features: * User-friendly interface for simple and efficient data input and analysis * Advanced algorithms for accurate and precise model and PI/PID controller tuning * Convert your PID controller parameters over 20 different DCS vendor forms. Whether you're an experienced engineer or just starting out, our PI/PID controller tuner app for iOS can help you fine-tune your control loop and improve your process control system. Download now and start optimizing your loops today! Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/