PIDTune vs Ping NetTool
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
PIDTune
This utility calculates PID tuning parameters using the IMC method for various process and controller types. It allows for direct input of process gain or variable changes, with adjustable tuning aggression via a slider.
- IMC method for PID tuning
- Calculates Kc, Ti, Td
- Supports FO, SO, and I process types
- Handles Parallel and Series controller types
- Adjustable tuning aggression slider
- Input process gain or variable changes
Read full descriptionHide full description
PID Tuner uses the IMC (Internal Model Control) method to calculate PID tuning parameters. I’ve tried a lot of tuning methods over the years and have found this one to be the best. The app is written for the iPad to show all the information on one page. The program calculates: PID Parameters: Controller Gain (Kc) Integral Time (Ti) Derivative Time (Td) For process types First Order with Dead Time (FO) Second Order with Dead Time (SO) Integrating or Long Time Constant with Dead Time (I) For controller types Parallel (non-interacting) c(s) = Kc (1 + 1/(Ti s) + Td s) Series (interacting) c(s) = Kc (Ti s + 1)/(Ti s)(Td s + 1) For controller modes PID PI You can either enter the process gain (Kp) directly or enter the changes in the controlled virable (CV) and manipulated variable (MV). Tuning aggression is adjusted using the slider to set the closed loop time constant to the process time constant ratio (λ/Ƭ). The closed loop time constant (λ) is the time the controller is expected to reach set point (plus the dead time (ϴ)). Setting the closed loop time constant to process time constant ratio (λ/Ƭ) to 1.0 will make the MV change to its final value and allow the process to settle out to the setpoint. Setting (λ/Ƭ) greater than 1.0 will give a slower responce. Setting (λ/Ƭ) less than 1.0 will cause the MV to make a larger change and then reduce to its final value. Tight tuning would be to set the close loop time constant to the dead time. Use the Integrating Process type (Ƭ = ∞) for both integrating processes or processes with long time constants. These processes use the maximum slope as the process gain. Tuning aggression for these processes is determined by setting the closed loop time constant to the dead time ratio (λ/ϴ). Once again, setting the closed loop time constat to the dead time gives tight control. References: “Probably the test simple PID tuning rules in the World,” Sigurd Skogestad, Jounal of Process Control, July 3, 2001 “Consider the generalized IMC-PID method for PID controller tuning of time-delay processes,” Y. Lee, S. Park, M. Lee, Hydrocarbon Processing, January 2006
Ping NetTool
Read full descriptionHide full description
Ping Network Tool is the network diagnostic companion that works for everyone — from the non-technical user who just wants to know whether the internet is down, to the developer or sysadmin who needs raw ICMP data and route tracing on the go. SIMPLE MODE — ONE TAP IS ALL IT TAKES Open the app and you are greeted by a single, friendly screen: "Is my internet working?" Tap the button. Within seconds, Ping Network Tool sends a probe to a reliable server, interprets the result, and answers in plain language — "Internet is available. Your connection is working normally." or an equally clear explanation of what went wrong and what you might try. No jargon, no numbers to decode. If you are curious about the underlying data, tap "See technical details" to reveal the raw ping output, or tap "Switch to Advanced" to unlock the full toolkit. ADVANCED MODE — LINUX-FAITHFUL PING OUTPUT IN YOUR POCKET Power users and professionals get a streamlined terminal-style interface with three tabs: Ping, History, and Network. The Ping tab lets you enter any hostname or IP address, choose your packet size, interval, and count, then press Ping to watch results stream in line by line — exactly as you would see them in a Linux terminal. A live RTT graph plots each round-trip time as responses arrive, giving you an instant visual of jitter and packet loss. When you are done, tap Trace to run a full traceroute to the same host and see every hop between your device and the destination, with per-hop latency. Copy the entire session output to the clipboard with one tap for sharing or logging. The History tab preserves every ping and traceroute session automatically. Browse past runs, review RTT statistics — min, avg, max, and mdev — and compare connectivity over time. Sessions persist across restarts so you always have a record. The Network tab shows a live snapshot of this device: your Wi-Fi IP address, external IP (via ipify.org), DNS server, and detected country. Tap Refresh at any time to update the external IP or country information. It is ideal for quickly verifying VPN connectivity, confirming your external address, or checking which DNS resolver your device is using. HOST BOOK — SAVE AND REUSE YOUR TARGETS The Host book stores up to five hosts in the free plan so you can jump straight to the targets you care about without retyping them. Each saved host can also be enrolled in background monitoring, which silently pings it at regular intervals and alerts you when it becomes unreachable. PREMIUM — ONE-TIME PURCHASE, NO SUBSCRIPTION Ping Network Tool is free to use with no time limit. A single optional in-app purchase of $1.99 unlocks the full feature set permanently: • TCP Ping: probe a specific port number instead of relying on ICMP alone. Useful for checking whether a web server, mail server, or game server is actually accepting connections on the relevant port. • Unlimited hosts and monitoring: remove the 5-host limit in the host book and enable background monitoring for as many targets as you need. • No upsell banners: permanently removes the promotional banner and weekly reminder that appear in the free plan. • Family Sharing: the purchase is shared automatically with everyone in your Family Sharing group on iOS at no extra cost. There is no subscription, no auto-renewal, and no hidden fees. Pay once and the unlock is yours forever, even after reinstalls. PRIVACY AND PERMISSIONS Ping Network Tool does not collect personal information. Network requests are limited to the hosts you explicitly choose to probe and a single call to ipify.org to retrieve your external IP address when you open the Network tab. No account is required. No data is uploaded to any server. Whether you are a home user troubleshooting a slow connection, a network engineer checking infrastructure from your phone, or a developer verifying that a deployment is reachable — Ping Network Tool is the fast, clean tool you have been looking for.
Screenshots
Verdict
The clearest difference is price: Ping NetTool at Free against PIDTune's $4.99. Ping NetTool also leads on update cadence (weekly vs every 4 months). On ads, in-app purchases, device support and iOS requirement there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Ping NetTool is free to download; PIDTune costs $4.99 up front. Neither carries in-app purchases, so what you see is what you pay.
PIDTune ships an update every 4 months, Ping NetTool weekly. The most recent releases landed on November 19, 2026 and November 10, 2026 respectively.
| Parameter | PIDTune | Ping NetTool |
|---|---|---|
| Price | $4.99 | Free — better |
| Rating | 5.0 (2 ratings) — better | — |
| Positive reviews | 100.0% of reviews | — |
| Number of ratings | 2 — better | — |
| Update frequency | Every 4 months | Weekly — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | — |
| Devices | iPhone, iPad, iPod — better | iPhone, iPad |
| Requires iOS | 15.0 — better | 16.0 |
| Further details — not scored | ||
| Size | 1 MB | 61 MB |
| Age rating | 4+ | 4+ |
| Developer | Richard H Street | TLM Software Design, Inc. |
In-app purchases
PIDTune
No in-app purchases
Ping NetTool
No in-app purchases









