SatCatcher Dish Installation vs DishPointer (Satellite Finder)

Dish alignment, pointing and Installation has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install and align your antenna without the need to call a specialist. SatCatcher is a satellite finder and dish pointer, it allows you to orient your antenna to any satellite. Using augmented reality, this application displays the target satellite in space to better choose the location of your antenna and ensure the absence of any obstacle (wall, tree ...). SatCatcher also uses your phone GPS to show your location on a map and shows the direction of the satellite from your position. The compass accompanied by a beep lets you orient your antenna following the acceleration of beeps or the arrow of the compass. The accelerometer is used to verify that the holder of your antenna is vertical. The antenna adjustment steps: 1- choose a satellite and authorize geolocation to determine the direction of the antenna orientation. 2- Show satellite in augmented reality with your camera and make sure there are no obstacles and validate the location of your antenna. 3. Check that the support of your antenna is vertical. 4. Calculate the polarization and adjust the rotation of the LNB (the head of your antenna) 5. Set the elevation 6- Search orientation with visual and sound assistant 7- Fine adjustments. For the good functioning of the application, SatCatcher will need the camera, compass, gyroscope, accelerometer and the GPS of your smartphone. tips: - If your smartphone does not have GPS, you can manually move the "marker" on the card until it points your exact location. Use zoom for more detail. - The compass is very important to adjust your dish, but if your smartphone does not have one, you can still use the application. In this case, it will help you to find clues and marks on the map from your location. It also allows you to calculate the orientation. Than you can use a manual compass to get a good orientation. - Do not hesitate to recalibrate the compass and avoid too close to the antenna arm, because it is sensitive to metallic elements. Try to place your smartphone where there is less magnetic interference. You can use SatCatcher to install your antenna or satellite dish, find and display the different satellites, alignment and orientation of your antenna or satellite dish to any visible satellite. Contact : infosoftycontactfree@gmail.com

DishPointer allows you to align your satellite dish with great precision in a minimum of time thanks to augmented reality. Adjusting a dish has always been complicated. but thanks to DishPointer this task becomes child's play. By following the 9 steps of the application, you will successfully install your dish in few minutes. No more need for a gyroscope to use augmented reality. We have combined the accelerometer and magnetometer data to compensate for the possible absence of the gyroscope. This allows the majority of smartphones to benefit from augmented reality. In DishPointer we have also integrated a module to calculate the magnetic declination and compensate the error between magnetic north and geographic north because we have noticed that the majority of smartphones do not integrate this declination. This help to display the right direction DishPointer is an application that lets you orient your dish or antenna to any satellite. Thanks to the sensors of your smartphone (Compass, accelerometer) this application displays the target satellite in space in order to better choose the location of your dish or antenna and to ensure the absence of any obstacle (wall, tree…). DishPointer also uses GPS to display your location on a map and then display the direction of the target satellite from your location. The compass accompanied by a beep allows you to orient your antenna or satellite dish by following the acceleration of the beeps and the arrow of the compass. The accelerometer is used to check that the support of your antenna or dish is vertical. The steps for adjusting the antenna or the dish: 1- choose your language 2- retrieving your GPS position automatically using GPS or manually by entering your latitude and longitude. 3- choose your target satellite to calculate the orientation parameters of the antenna or the satellite dish. 4- check that the support of your antenna or dish is vertical. 5- calculate the polarization and adjust the rotation of the LNB (the head of your antenna or satellite dish) 6- adjust the elevation 7- display of a line which indicates the orientation of the target satellite from your position on a Google Maps. 8- using the compass of your smartphone accompanied by a beep to help you find the right direction of the satellite (available in Pro version). 9- display the satellite in augmented reality thanks to your camera and make sure that there is no obstacle. This is used to validate the location of your antenna or dish (available in the Pro version). 10- refine the settings. For the app to work properly, DishPointer will need the compass and the accelerometer from your smartphone. Tips: - if your smartphone does not have a GPS, you can manually enter your latitude and longitude (you can get them on Google Maps). - the compass is only essential for the Pro version. - do not hesitate to recalibrate the compass and avoid approaching it too close to the arm of the parabola because it is sensitive to metallic elements. Try to place your smartphone where there is the least magnetic interference. The free version of DishPointer is enough for you to install your dish. It will calculate the orientation parameters and display the precise direction of the satellite on a Maps map. The Pro version offers you the use of augmented reality to see the exact position of satellites in space. It also provides you with an assistant based on the phone compass to display the exact direction of the target satellite. Contact: infosoftycontactfree@gmail.com