Apogee Control for Element Series & Ensemble TB vs Comp 609
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Apogee Control for Element Series & Ensemble TB
Wirelessly control analog input and output settings for compatible audio interfaces. Adjust levels, gain, and input configurations remotely. Offers a demo mode for trying features without hardware.
- Wireless control of audio interfaces
- Adjust analog input/output levels
- Configure gain and input settings
- Access system settings like mute and talkback
- Demo mode for virtual hardware
Read full descriptionHide full description
Apogee Control for Element Series & Ensemble Thunderbolt Interfaces provides simple wireless control of analog input and output settings for your Apogee Ensemble Thunderbolt, Element 88, Element 46 and Element 24 audio interface. Simply connect both your iPhone/iPad and your Mac running Apogee Control software to the same WiFi network, launch Apogee Control, and choose your audio interface(s). Once you've allowed the connection on your Mac, you're ready to go! The following hardware interface settings are accessible from the app: For All Analog Inputs - Analog Level: Line, Mic, Instrument - Gain - Input Settings: 48V, Soft Limit, Group, Polarity Reverse, HiPass (Ensemble only) Insert (Ensemble only) - Meter and Over indicator For Main, Alt, HP Outputs (number & type vary by interface) - Source - Output Level - Speaker Set (if offered by hardware interface) - Mute, Dim, Sum to Mono - Meter and Over indicator System Settings - Clear Meters - Mute All - Enable Talkback Even if you don't have an Apogee interface yet, you can try the app by selecting a Demo (or virtual) hardware interface to experience just how simple it it. System Requirements - Element Control v1.1 or greater installed on your Mac - iOS 9.0 and above - iPhone 5 and later; iPad 2 and later
Comp 609
This audio effect plugin emulates analog compressors, offering extensive control over attack, release, ratio, and saturation. It supports various operation modes, external sidechaining, and parallel compression for detailed audio shaping. A demo version is available with a time limit.
- Analog compressor emulation
- Adjustable attack, release, and ratio
- External sidechain with high-pass filter
- Multiple operation modes (M/S, Stereo, Mono)
- Parallel compression
- Oversampling and 64-bit processing
- Scalable GUI
Read full descriptionHide full description
Comp 609 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the Comp 609 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of Comp 609 AUv3 plug-in comes as In-App Purchase. FEATURES: • 6 Attack, 9 Recovery (Release) and 5 Ratio selections; • External Sidechain and Sidechain signal High-pass filter; • 6 operation modes: M/S, Mid-channel, Side-channel, Mono with Right-channel as Sidechain signal, 2-Mono, linked Stereo (or Mono); • Parallel compression; • 8x Oversampling and 64-bit floating point processing; • Undo/Redo; • A/B comparison; • 2x/4x/8x Upsampling; • Macro controllers; • Built-in Gain Match; • Scalable GUI. COMPRESSOR SECTION: • Threshold determines how much compression will occur. When the input signal exceeds the Threshold level, the compressor engages. A smaller value results in more compression. The available range is from -20 dBu to +12 dBu; • Attack determines how fast limiting will engage when the signal exceeds the limiter Threshold. The available values is from 1 to 6; • Recovery (Release) is the time it takes for the compressor to stop processing after the signal drops below the Threshold value. The available values are 40, 80, 100, 400, 600, 800, 1000, 1500, 2000 ms; • Ratio — this control determines the compressor ratio. The available values are 1.5:1, 2:1, 3:1, 4:1 and 6:1; • Sat. On — this toggle switch enables the Analog Saturation. The saturation has no effect unless this switch is in the «On» (down) position. MASTER SECTION: • SC-Filter — the Sidechain Filter controls the cutoff frequency of a low-cut filter on the compressor control signal Sidechain. The available range is 30 Hz to 240 Hz and Off; • Input Gain controls the signal input level to the plug-in; • The Makeup control increases the signal level out of the compressor to compensate for reduced levels as a result of compression. The available range is -20 dB to +20 dB. The Makeup control does not affect the amount of compression; • Mix — the output balance between the signal processed by the plug-in and the original dry source signal can be adjusted with the Mix control. Mix facilitates parallel compression techniques without having to create additional routings in the DAW; • Comp. In — this toggle switch enables the compressor. The compressor has no effect unless this switch is in the «In» (down) position. • Mode — compressor can operate in six modes: M/S, Mid-channel, Side-channel, Mono with Right-channel as Sidechain signal, 2-Mono, linked Stereo (or Mono). This switch determines the active mode. To use Comp 609 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — Comp 609 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.
Screenshots
Verdict
The clearest difference is review sentiment: Comp 609 at 88% against Apogee Control for Element Series & Ensemble TB's 18%. Comp 609 also leads on rating (4.8 vs 3.1). Apogee Control for Element Series & Ensemble TB's advantage is in-app purchases (none vs 1). On price, ratings volume, update cadence and ads there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Comp 609 sells 1 one-off in-app purchase. Apogee Control for Element Series & Ensemble TB asks for nothing beyond the download.
Comp 609 holds the better App Store score, 4.8 against 3.1. Both are backed by a comparable volume of ratings — 11 and 25 respectively. Written reviews point the same way: 18% of Apogee Control for Element Series & Ensemble TB's written reviews are positive against 88% of Comp 609's.
Apogee Control for Element Series & Ensemble TB ships an update every 5 months, Comp 609 every 7 months. The most recent releases landed on November 13, 2026 and November 3, 2026 respectively.
| Parameter | Apogee Control for Element Series & Ensemble TB | Comp 609 |
|---|---|---|
| Price | Free | Free |
| Rating | 3.1 (11 ratings) | 4.8 (25 ratings) — better |
| Positive reviews | 17.6% of reviews | 87.5% of reviews — better |
| Number of ratings | 11 | 25 — better |
| Update frequency | Every 5 months — better | Every 7 months |
| Ads | No | No |
| In-app purchases | No — better | Yes |
| Monetization | Free — better | Free with in-app purchases |
| Devices | iPhone, iPad, iPod | iPhone, iPad, iPod |
| Requires iOS | 9.0 — better | 10.0 |
| Further details — not scored | ||
| Size | 20 MB | 21 MB |
| Age rating | 4+ | 4+ |
| Developer | Apogee Electronics Corp | RRS, OOO |
Customer experience
Apogee Control for Element Series & Ensemble TB
Comp 609
In-app purchases
Apogee Control for Element Series & Ensemble TB
No in-app purchases
Comp 609
- RRS Comp 609 Unlimited$4.99
Questions
Is Apogee Control for Element Series & Ensemble TB free?
Is Comp 609 free?
Which has better reviews, Apogee Control for Element Series & Ensemble TB or Comp 609?
Do Apogee Control for Element Series & Ensemble TB or Comp 609 have ads?
Which is updated more often, Apogee Control for Element Series & Ensemble TB or Comp 609?
Other comparisons















