MP8000 vs SITRANS mobile IQ

Monitor and control the MP8000 Bluetooth® Overload Relay on your Apple® device. Use the MP8000 app to configure the relay, view real-time data, and troubleshoot fault codes via a Bluetooth interface in the relay. No need to open the control panel. Keeping the panel door closed, keeps workers safer from the dangers of arc flash. The app has a range of 30 feet so workers can stay far away from the panel and can even stay in their vehicle in remote applications. * Easily pair multiple MP8000 Relays to your Apple® device * Stand next to the motor or pump – not the relay – to monitor equipment startup on new installations * Improve safety: monitor your motor or pump from 30 feet away * Reduce set up time with less wiring PAIRING Pairing is safe and secure. Pair with Apple® iPhone® or iPad® (version 7.0 and higher) smartphone or tablet. A unique pairing code is printed on the side label found on the MP8000 relay. MP8000 RELAY The MP8000 enhanced overload relay protects any motor drawing 0.5-1,000 full load Amps (external CTs are required above 100 Amps). It is designed for single or 3-phase systems with operating voltages of 90-690 VAC (use of external potential transformers can extend upper voltage range above 690 VAC). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. PROTECTION FROM * Overload (Overpower) * Underload (Underpower) * Overcurrent/Jam * Undercurrent * Current Unbalance * Phase Loss * Phase Reversal * Overvoltage * Undervoltage * Voltage Unbalance * Rapid Cycling/Jog * Contactor Failure * Zero-Sequence Ground Fault * PTC Motor Overtemperature WHAT CUSTOMERS ARE SAYING “This is a HUGE opportunity. During a new installation, I can be right next to the motor at start up to see if it’s binding (or other problems) and shut it off immediately”

SITRANS mobile IQ is an App for mobile devices, which allows eligible service technicians to monitor and parameterize compatible field instrumentation via a Bluetooth interface. SITRANS mobile IQ uses a Bluetooth interface to communicate with the field devices. Your mobile device must have a Bluetooth interface, version 4.2 or better. Supported field devices are SIEMENS SITRANS LR100, LR110, LR120, LR140, LR150 and MAG8000-LORABLE/4G Gen2. With the availability of the Bluetooth Adapter AW050, the SITRANS LU240, SIPART PS100, LR500 Series, PS2, FMT020 and LT500 are supported as well. For additional information and restrictions (e.g. required firmware versions), kindly refer to the respective product documentation. Field Devices not listed here may not be connected to the SITRANS mobile IQ and are currently not supported. This app allows you to list all supported field devices that are in range, to display the status of a connected field device and display measurement values of a connected field device. Selected values like e.g. level measurement or echo confidence can be displayed in a chart. SITRANS mobile IQ enables you to change the parameters of the connected field device and also copy parameters from one device to another (cloning). SITRANS mobile IQ can open a link on your mobile device to FAQ, application examples, manuals and further information for the type of the connected field device.