Orcas Flowmeter vs MP8000

The Orcas App is the component of the Orcas Flowmeter solution that connects your iPhone to the innovative Orcas Sensor to measure fluid flow through pipes. The companion Orcas, and Cypress flowmeter sensors are compact, clamp-on ultrasonic transducer devices that sense fluid flow through a pipe wall and wirelessly transmits flow measurements to the Orcas App using Bluetooth Low Energy. The Orcas App guides you through your setup, then displays the readings taken by your Orcas Sensor. The App remembers your location specifications so you’re always ready to take additional readings. The Orcas Flowmeter solution features: * Installation. The Orcas Sensor senses through a pipe wall, allowing the meter to be installed on the outside of any pipe. * Quick, accurate setup. You can select nearly all of your setup parameters from pre-loaded, drop-down menus, so you go faster and risk fewer errors. * MODBUS RTU, 4-20mA, Pulse output options with the Cypress hardware. * Transmit, store, and access flow data on the Cloud, by connecting with the Ayyeka Wavelet hardware device. * Data Logger. Record flow for up to 365 days and share the data via email, text, or air drop. * Bluetooth-enabled. The Orcas App automatically connects to your Orcas Sensor through your device’s Bluetooth technology. * Always improving. Enhancements arrive regularly on your device via simple App update. * Save and re-use location settings. Ideal for repeated periodic checks. * Accurate. The Orcas App automatically filters flow data, then uses an advanced proprietary signal processing techniques to calculate flow. * Metric or Imperial measurements. Pre-loaded, input and displayed values in your system of choice. Learn more about the Orcas Sensor and the Orcas Flowmeter solution at www.soundwatertech.com.

Monitor and control the MP8000 Bluetooth® Overload Relay on your Apple® device. Use the MP8000 app to configure the relay, view real-time data, and troubleshoot fault codes via a Bluetooth interface in the relay. No need to open the control panel. Keeping the panel door closed, keeps workers safer from the dangers of arc flash. The app has a range of 30 feet so workers can stay far away from the panel and can even stay in their vehicle in remote applications. * Easily pair multiple MP8000 Relays to your Apple® device * Stand next to the motor or pump – not the relay – to monitor equipment startup on new installations * Improve safety: monitor your motor or pump from 30 feet away * Reduce set up time with less wiring PAIRING Pairing is safe and secure. Pair with Apple® iPhone® or iPad® (version 7.0 and higher) smartphone or tablet. A unique pairing code is printed on the side label found on the MP8000 relay. MP8000 RELAY The MP8000 enhanced overload relay protects any motor drawing 0.5-1,000 full load Amps (external CTs are required above 100 Amps). It is designed for single or 3-phase systems with operating voltages of 90-690 VAC (use of external potential transformers can extend upper voltage range above 690 VAC). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. PROTECTION FROM * Overload (Overpower) * Underload (Underpower) * Overcurrent/Jam * Undercurrent * Current Unbalance * Phase Loss * Phase Reversal * Overvoltage * Undervoltage * Voltage Unbalance * Rapid Cycling/Jog * Contactor Failure * Zero-Sequence Ground Fault * PTC Motor Overtemperature WHAT CUSTOMERS ARE SAYING “This is a HUGE opportunity. During a new installation, I can be right next to the motor at start up to see if it’s binding (or other problems) and shut it off immediately”