dLive OneMix vs XSCACE Studio

OneMix is a cut down version of the dLive MixPad app that locks control to a single Aux (monitor) mix. Multiple iPads may be set up by the 'Admin' user to give each musician customised personal monitor control via Wi-Fi connection to the dLive mixing system without the risk of affecting the other monitors or FOH main mix. dLive OneMix can be configured to provide as much or as little control as needed. Logon as a User provides personal control of: - One monitor (Aux) level and mute - Monitor PEQ, NEQ and Comp if enabled - Send levels and stereo pan to the monitor - Send Mute, Gate, PEQ, Comp if enabled Logon as Admin allows custom setup: - Set a OneMix session name to identify the user - Choose an Aux (monitor) mix - Assign a 'My Mix' layer and up to 3 custom layers - Assign up to 8 strips on My Mix layer, 32 on custom layers - Assign sends - Inputs, FX returns, Groups - Assign DCAs - Assign blank spaces in layers - Name each layer - Enable or disable channel processing and mutes or assigns per layer Requirements An Allen & Heath dLive mixing system with a suitable wireless router or access point connected to one of its Network ports. This version of OneMix can connect to a dLive mixing system running: - dLive Firmware V2.10 or subsequent V2.1x maintenance releases. - dLive Firmware V2.00 or subsequent V2.0x maintenance releases, when the Firmware compatibility mode setting is enabled. This can be found in the iOS Settings / dLive OneMix. You will need to shut down (force quit) the app and restart it for changes to take effect.

XSCACE Studio turns your iPad or Mac into a complete amplifier controller and acoustic measurement instrument. CONTROL YOUR XSCACE AMPLIFIER • Automatic discovery on your network — no setup • Per-channel gain, delay, 6-band parametric EQ and crossovers with live response curves • PsySculpt psychoacoustic bass enhancement • Presets: save, load and manage complete tuning states • Live sync: changes made anywhere appear everywhere, instantly CALIBRATION TOOLKIT A full measurement suite — works with any speaker system, no XSCACE hardware required: • X-Sense EQ: one-button automatic room correction toward Harman, flat or custom target curves • Channel delay and level alignment with mic-verified sweeps • SPL meter (A/C/Z weighting, fast/slow, Leq) with 94 dB calibrator reference • Real-time analyzer with NC room-noise rating • Frequency response, phase, group delay, impulse response and spectral decay waterfall • Distortion (THD) analysis • RT60 reverberation time (ISO 3382-1 method) • Subwoofer alignment at the crossover • Transfer function with live coherence • Polarity checks and mic calibration file import (UMIK and similar) • Professional PDF and HTML reports Measure over AirPlay or a wired output. Use the built-in microphone or a calibrated USB measurement mic.