Qu MixPad vs XSCACE Studio

Qu-MixPad release V1.2.0: This version is for Qu-5 / Qu-5D, Qu-6 / Qu-6D, Qu-7 / Qu-7D mixers running V1.2.* firmware. Please note: It is NOT compatible with Qu-16, Qu-24, Qu-32, Qu-Pac or Qu-SB mixers. Qu-MixPad allows control of a Qu digital mixing console over a wired or wireless network. It can be used simultaneously and independently of the Qu surface, so it can provide supplementary local control as well as giving the engineer the freedom to move around and mix from different listening positions. Two devices running Qu-MixPad can be connected and used at the same time as using the Qu surface, giving three separate points for control of all mixes. It provides the following: Level and Routing Control - Send levels, panning/balance, assignments, pre/post settings and mutes from all channels to all mixes Output send levels for all mixes Send and Return levels for FX DCA and Mute Group control, including assignments Processing Control - Input channel Preamp/DEEP Preamp Model/HPF/Gate/Expander/Insert/PEQ/Compressor Mix channel Insert/Feedback Assistant/GEQ/PEQ/Compressor DEEP compressors and GEQ’s FX Parameters and FX Return PEQ Access to all Libraries Other features include – Over the air firmware update Scene and Cue List Management Global filters, scene filters and channel safe control Works with Qu User Permissions Copy/Paste and Reset functionality Full control of Signal Generator and assignments Qu-Drive controls for stereo USB or multichannel SD recordings 4 custom layers with the ability to copy or use/follow desk layers All input/output/processing metering Channel RTA Mixer config including stereo linking and mix type PAFL setup and selection Channel naming/colour SoftKey and MIDI strips setup and use Follow Channel/Mix Select option Offline Mode – Edit and manage shows, scenes and libraries without a console connection Transfer entire shows between MixPad and a Qu Share/store shows to cloud or email (when available on the device) Legacy Mode - App can connect to a previous major release of firmware with limited functionality

XSCACE Studio turns your iPad or Mac into a complete amplifier controller and acoustic measurement instrument. CONTROL YOUR XSCACE AMPLIFIER • Automatic discovery on your network — no setup • Per-channel gain, delay, 6-band parametric EQ and crossovers with live response curves • PsySculpt psychoacoustic bass enhancement • Presets: save, load and manage complete tuning states • Live sync: changes made anywhere appear everywhere, instantly CALIBRATION TOOLKIT A full measurement suite — works with any speaker system, no XSCACE hardware required: • X-Sense EQ: one-button automatic room correction toward Harman, flat or custom target curves • Channel delay and level alignment with mic-verified sweeps • SPL meter (A/C/Z weighting, fast/slow, Leq) with 94 dB calibrator reference • Real-time analyzer with NC room-noise rating • Frequency response, phase, group delay, impulse response and spectral decay waterfall • Distortion (THD) analysis • RT60 reverberation time (ISO 3382-1 method) • Subwoofer alignment at the crossover • Transfer function with live coherence • Polarity checks and mic calibration file import (UMIK and similar) • Professional PDF and HTML reports Measure over AirPlay or a wired output. Use the built-in microphone or a calibrated USB measurement mic.