HD vs Qu MixPad

HD-Mix provides the user with remote control of the Heritage Digital series of mixing consoles, offering the same functionality and workflow found on the console from your tablet. Connection Screen Upon boot, HD-Mix will automatically scan for consoles that are on the same network as your tablet, or you can manually enter the console's IP from the connection screen. Mix View Mix View provides the user with a clear and easy to navigate overview of the console meter bridge and faders, with access to all Inputs, Auxes, Matrices, VCA's and POP Groups. HD-Mix utilises the same Common Control Rotary used in the Heritage series consoles, allowing the user to move and lock any parameter on screen for ease of access. Choose between standard and expanded 8/16 channel fader layouts to view more channels at once. Monitor Mode HD-Mix supports Monitor Mode, allowing the user to select a target output channel and send multiple sources to it directly via the channel faders. While active, the channel faders become dedicated send level controls for the selected monitor target, offering fast, tactile control over monitor mixes. The fader tray can be pulled down to reveal the selected channel widgets, with access to and full control of the following: - Configuration Provides the user with an overview and control of: • 48V • Mic Gain control • Trim control • Phase • Delay • Talk • Solo / Bus configuration options (Solo A, Solo B, Solo A&B) - EQ Full parameter control of channel EQ with Band Locks, Flatten One / All band functionality and Full Screen mode. - Gate Full access and control of channel gates / duckers, with expandable Key Filter section. - Compressor Channel compressors with full control of all parameters and modes including key sidechain source control. - Effects The Effects widget shows effects populated in the selected channel, with support for full screen effect editing. - Sends and Matrices The Sends and Matrices widget provides the user with a complete overview of contributions and parameter controls (for the selected channel) to all console Aux and Matrix busses. - Flip Mode HD-Mix can be placed into Flip Mode, allowing the user to select and send contribution levels from an easy to access interface. When Flip is activated the meter bridge can be replaced with a Flip Target Select window, which allows the user to select a Flip target and then set appropriate contribution levels. - Full Screen Effect Support HD-Mix provides full screen parameter control for supported effects, including the Midas XL4 EQ, GEQ and Ocean EQ, with additional effects being added in future updates. - Preferences Page Solo System preferences are available to the user, along with Channel Flip Lock functionality and Reset Channel EQ Lock functionality. ---------------------- Please Note: We recommend using a wired connection from the console to the Access Point in critical applications (use of a wired connection from the Access Point to the tablet will further ensure a consistent connection).

Qu-MixPad release V1.2.0: This version is for Qu-5 / Qu-5D, Qu-6 / Qu-6D, Qu-7 / Qu-7D mixers running V1.2.* firmware. Please note: It is NOT compatible with Qu-16, Qu-24, Qu-32, Qu-Pac or Qu-SB mixers. Qu-MixPad allows control of a Qu digital mixing console over a wired or wireless network. It can be used simultaneously and independently of the Qu surface, so it can provide supplementary local control as well as giving the engineer the freedom to move around and mix from different listening positions. Two devices running Qu-MixPad can be connected and used at the same time as using the Qu surface, giving three separate points for control of all mixes. It provides the following: Level and Routing Control - Send levels, panning/balance, assignments, pre/post settings and mutes from all channels to all mixes Output send levels for all mixes Send and Return levels for FX DCA and Mute Group control, including assignments Processing Control - Input channel Preamp/DEEP Preamp Model/HPF/Gate/Expander/Insert/PEQ/Compressor Mix channel Insert/Feedback Assistant/GEQ/PEQ/Compressor DEEP compressors and GEQ’s FX Parameters and FX Return PEQ Access to all Libraries Other features include – Over the air firmware update Scene and Cue List Management Global filters, scene filters and channel safe control Works with Qu User Permissions Copy/Paste and Reset functionality Full control of Signal Generator and assignments Qu-Drive controls for stereo USB or multichannel SD recordings 4 custom layers with the ability to copy or use/follow desk layers All input/output/processing metering Channel RTA Mixer config including stereo linking and mix type PAFL setup and selection Channel naming/colour SoftKey and MIDI strips setup and use Follow Channel/Mix Select option Offline Mode – Edit and manage shows, scenes and libraries without a console connection Transfer entire shows between MixPad and a Qu Share/store shows to cloud or email (when available on the device) Legacy Mode - App can connect to a previous major release of firmware with limited functionality