M AIR vs Avantis OneMix

Midas M-AIR iPad app for MR18/MR12 M-AIR allows you to control the mixing, processing and effects functions of Midas' MR18 & MR12 digital audio mixers right from your iPad®. M-AIR Version 1.6 delivers simple and advanced control features for the MR18 & MR12 mixers. The user interface is providing a access to mixing 18 input channels to 12 buses and editing 4 internal stereo effects processors, with highest professional audio quality. It provides customisable fader layers, Automixing, DCA and Mute Group control, as well as access to the 64 internal snapshots memory of Midas M-AIR mixers. The M-AIR app can be used in demo mode for offline show preparation, when no mixer is available. KEY FEATURES * Control all Levels for Inputs 1 – 18, incl. Preamp Gain, Low Cut, Phase, Phantom, Stereo Link * Control all mixer internal snapshot memory, DCA groups, Mute groups and Automixing * Full EQ Control – fine-tune the 4-/6-band parametric or 31-band graphic equalizers with RTA support * Metering Overview – all levels at a glance * Control bus send levels of input channels conveniently from their channel faders * Detailed Preamp/Configuration, Gate, Dynamics, EQ and Bus Sends editing pages * Full Effects editing GUI screens for all 61 internal FX types * Gate and Dynamics offer either simple preset-based control or advanced, in-depth parameter control * Create custom presets for each component of your M-AIR processing, or entire mixer scenes on your iPad * Control background music or stereo recording on USB drives with MR12 mixers

OneMix is a cut down version of the Avantis MixPad app that locks control to a single Aux (monitor) mix. Multiple iPads may be set up by the 'Admin' user to give each musician customised personal monitor control via Wi-Fi connection to the Avantis mixer without the risk of affecting the other monitors or FOH main mix. Avantis OneMix can be configured to provide as much or as little control as needed. Logon as a User provides personal control of: - One monitor (Aux) master level and mute - Monitor master PEQ, NEQ and Comp if enabled - Send levels and stereo pan to the monitor - Send Mute, Gate, PEQ, NEQ, Comp if enabled - SoftKeys Logon as Admin allows custom setup: - Set a OneMix session name to identify the user - Choose an Aux (monitor) mix - Assign a 'My Mix' layer and up to 3 custom layers - Assign up to 8 strips on My Mix layer, 32 on custom layers - Assign sends - Inputs, FX returns, Groups - Assign DCA masters - Assign SoftKeys - Assign blank spaces in layers - Name each layer - Enable or disable channel processing and mutes or assigns per layer Requirements: An Allen & Heath Avantis mixer with a suitable wireless router or access point connected to one of its Network ports. This version of OneMix can connect to Avantis mixers running: - Avantis Firmware V2.00 or subsequent V2.0x maintenance releases. - Avantis Firmware V1.30 or subsequent V1.3x maintenance releases, when the Firmware compatibility mode setting is enabled. This can be found in the iOS Settings / Avantis OneMix. You will need to shut down (force quit) the app and restart it for changes to take effect. Refer to the Allen & Heath website for more information and to download the latest mixer firmware.