VoicePrinter vs Audio SA

Sound is decomposed into two dimensions and displayed continuously over time. The premium version offers a new style of audio recorder/player. This app can be used for analysis of Human voice, Environmental sound, Sound of animals, musics, etc. The specifications are as follows. Sampling rate = 10000 to 44100 Hz Display maximum frequency = 1000 to 22050 Hz Display time range = 2 to 10 seconds Frequency axis display resolution = 100 Time axis display resolution = 10 / sec From version 1.1, recording, playback, import, and export functions based on sound and voiceprints can be used by in-app purchase. In this case, banners will not be displayed. The premium version allows recording, playback, import of external sound source files, and external output. ・Record under the following conditions Sampling frequency = 10000~44100Hz ・Display audio analysis results under the following conditions (audio is played in sync with the analysis screen) Maximum display frequency (high-pitched display frequency limit) = 1000~22050Hz (half the sampling frequency or less) Display time range (time that can be displayed on one screen) = 2~10 seconds Frequency display resolution (frequency axis: number of data displayed on the vertical axis) = 200 points Time axis display resolution (time axis: display interval (pitch) on the horizontal axis) = 50~200ms (10~200 points) ・Importing external audio source files Imports 16-bit linear PCM mono audio sources. (In the case of stereo, only 1ch is imported.) ・External output Outputs as 16-bit linear PCM mono. *To input and output data to iCloud Drive, you must enable iCloud Drive in System Preferences. *******

"Audio SA" is a spectrum analyzer that can capture voiceprints as TFFT images. The created TFFT image can be exported as a high resolution image. (Image size example iPhoneSE3: 4096×4096, iPhoneX: 6144×6144) If you just want to try creating a voiceprint, you don't need to worry about the settings. Just record your voice and run the TFFT to see the voiceprint. "Audio SA" can also be used for FFT-related learning. You can also check changes in important characteristics such as FFT frequency resolution and dynamic range while switching the FFT size and window function. As an additional function, we have implemented a simple waveform generator, so please try it when learning. The simple waveform generator can generate sine waves, square waves, Gaussian white noise, and their combinations. When using TFFT images for machine learning, etc., it will be necessary to give sufficient consideration to the settings. "Audio SA" allows you to set the audio waveform analysis range, FFT size, power spectrum scale, window function, and drawing color. The analysis range of the audio waveform is set by scaling and moving the audio waveform. The displayed range becomes the analysis range. Tap the play button to play only the analysis range, which is convenient for checking. FFT size can be selected from 256,512,1024,2048,4096,8192,16384,32768. (However, you can select from 256, 512, 1024, 2048, and 4096 during recording and playback.) The power spectrum scale can be selected from Linear scale, Log scale, and Mel scale. For Mel scale, you can set the break frequency. The mel scale is close to a linear scale up to the break frequency and close to a log scale after the break frequency. 700Hz, which is the most commonly used frequency, is set as the default value. The window function can be selected from Blackman, Hamming, Hann, Rectangular. It is recommended to choose Blackman when wide dynamic range is required and Hamming when high frequency resolution is required. Roughly speaking, Hann is a trait between Blackman and Hamming. For Rectangular, no special window function is multiplied during FFT transform. The audio data cut out from the audio waveform for the FFT size is used as it is. In addition, the lower limit of the dynamic range when drawing TFFT images can also be set. It's easy to set up, just swipe up and down on the FFT image. The part displayed as the FFT image is drawn as it is in the TFFT image. "Audio SA" consumes tickets to record audio. Tickets can be earned by watching ads. However, if you purchase "Remove Ads" as an in-app purchase, you will be able to record without a ticket. [details] https://app.brain-workout.org/spectrumanalyzer-e/