RST Scope vs Audio SA

This is an app for amateur radio operators with a narrow band of audio frequency, spectrum scope & waterfall display. You can get a rich display by microphone inputting the speaker output of a radio that does not have a spectrum scope or waterfall function. The FFT allows you to distinguish between the dot and dash of Morse code. [function] 1. Ability to change the speed of the waterfall 2. Ability to adjust the level of audio input 3. Function to switch the display band between wide and narrow 4. Display pause function (pause / cancel by touching the screen) 5. Function to switch the cross hatch ON / OFF by longTap 6. Frequency resolution is fixed at 40Hz. 7. Function to switch the USB/LSB by Left/Right Swipe 8.Recording/Playback function of Input Sound RST Scope(Free) https://www.youtube.com/watch?v=1s9RvOFp52g

"Audio SA" is a spectrum analyzer that can capture voiceprints as TFFT images. The created TFFT image can be exported as a high resolution image. (Image size example iPhoneSE3: 4096×4096, iPhoneX: 6144×6144) If you just want to try creating a voiceprint, you don't need to worry about the settings. Just record your voice and run the TFFT to see the voiceprint. "Audio SA" can also be used for FFT-related learning. You can also check changes in important characteristics such as FFT frequency resolution and dynamic range while switching the FFT size and window function. As an additional function, we have implemented a simple waveform generator, so please try it when learning. The simple waveform generator can generate sine waves, square waves, Gaussian white noise, and their combinations. When using TFFT images for machine learning, etc., it will be necessary to give sufficient consideration to the settings. "Audio SA" allows you to set the audio waveform analysis range, FFT size, power spectrum scale, window function, and drawing color. The analysis range of the audio waveform is set by scaling and moving the audio waveform. The displayed range becomes the analysis range. Tap the play button to play only the analysis range, which is convenient for checking. FFT size can be selected from 256,512,1024,2048,4096,8192,16384,32768. (However, you can select from 256, 512, 1024, 2048, and 4096 during recording and playback.) The power spectrum scale can be selected from Linear scale, Log scale, and Mel scale. For Mel scale, you can set the break frequency. The mel scale is close to a linear scale up to the break frequency and close to a log scale after the break frequency. 700Hz, which is the most commonly used frequency, is set as the default value. The window function can be selected from Blackman, Hamming, Hann, Rectangular. It is recommended to choose Blackman when wide dynamic range is required and Hamming when high frequency resolution is required. Roughly speaking, Hann is a trait between Blackman and Hamming. For Rectangular, no special window function is multiplied during FFT transform. The audio data cut out from the audio waveform for the FFT size is used as it is. In addition, the lower limit of the dynamic range when drawing TFFT images can also be set. It's easy to set up, just swipe up and down on the FFT image. The part displayed as the FFT image is drawn as it is in the TFFT image. "Audio SA" consumes tickets to record audio. Tickets can be earned by watching ads. However, if you purchase "Remove Ads" as an in-app purchase, you will be able to record without a ticket. [details] https://app.brain-workout.org/spectrumanalyzer-e/