Cybery vs Simple NAM Chain

The Cybery app is designed to manage the Hotone Cybery loop switcher. You can use it to edit footswitch functions, manage your own settings, and get firmware updates via Bluetooth®*.   ●Easy-to-use UI   No complex menus and matrixes - The carefully designed interface is clean and straight forward. It takes just seconds to finish editing and sync your settings to Cybery.   ●Manage and save your own settings   This app lets you set up and manage every aspect of your Cybery. You can: turn the built-in buffer on/off, switch between Direct/Preset modes, edit footswitch functions, expand hardware loops (another Cybery is needed) and update firmware. You can also save all your settings to a user preset so you won’t forget them.   ●About Cybery   Cybery is a compact but versatile pedal manager that helps you keep everything in order. Four true bypass loops guarantee a pristine signal, programmable MIDI lends you massive control, and a free mobile app sets you free from complex and annoying hardware programming.   ●Cybery Features   ​​• Compact size, rock solid aluminum casing ​​• 4 independent relay-based True Bypass audio loops ​​• Programmable MIDI control (sending PC and CC messages) for commanding pedals, multi-effects, mobile apps, and more ​​• Built-in Bluetooth®* module for wireless programming and control ​​• Switchable high quality input buffer for preventing high frequency loss ​​• Mute/Tuner function with independent tuner output ​​• SW A/B function for amp channel switching ​​• 2 switching modes: - Direct mode for instant access - Preset mode with 40 programmable presets for different combinations ​​• Low switching noise ​​• 9V DC power supply   For more information: www.hotoneaudio.com   *Bluetooth® is a trademark owned by the Bluetooth SIG, Inc. This trademark was used merely to identify a functional characteristic of the product.

Turn your iPhone or iPad into a guitar rig. Simple NAM Chain plays amp captures in the Neural Amp Modeler format, including A1 and A2. Load a capture, add a cabinet impulse response, and play. It runs on its own, or as an Audio Unit inside GarageBand, AUM and other hosts. BUILD A CHAIN Stack up to six blocks in series — a drive pedal into an amp head into a cab, or whatever order you want. Drag to reorder, bypass any block, remove the ones you don't need. Tag each one Full Rig, Amp Head, Pedal, Outboard or IR so the chain reads at a glance. EVERY BLOCK IS A FULL RIG Each block has its own input level, noise gate, amp capture, cabinet IR, three-band EQ and output level. The gate, the EQ and the IR each switch off independently. LOAD WHOLE MODEL PACKS Captures usually arrive as a folder holding the same amp at a range of settings. Point the app at the folder and step through every capture with the arrows, without going back to a file browser between takes. Keep your packs anywhere on the device, or drop them into the Full Rig, Amp Head, Pedal, Outboard and IR folders the app creates for you in Files. GAIN STAGING HANDLED Captures that carry calibration data are gain-staged automatically as you reorder the chain, so stacking blocks doesn't wreck your levels. Set your interface's input level in dBu once, and pick Raw, Normalized or Calibrated output. ALSO INCLUDED • Built-in tuner • Slim control, to trade a little accuracy for lower CPU on captures that support it • Live CPU readout • Recovers cleanly from phone calls, route changes and unplugged interfaces WHAT YOU NEED An audio interface to plug your guitar into gives the best results — the built-in microphone works, but isn't meant for playing. You'll need captures in .nam format (A1 and A2 are both supported), and impulse responses as .wav files if you want cabinets; thousands are free at tone3000.com. Headphones or monitors, so the mic doesn't feed back. FREE FOR THREE DAYS Everything is unlocked for three days. After that the app stops processing audio until you unlock it, which is a single payment of $4.99. Not a subscription, no accounts, no ads, and nothing is collected about you.