DiGiCo S vs Avantis OneMix

Set yourself free with the DiGiCo S-Series app. It has been designed to be compatible with DiGiCo's S21 and S31 The DiGiCo S App requires V1.4+ of S-Series console software and the iPad connection must be configured on the console. It is not compatible with earlier versions of S-Series software The DiGiCo S app is the perfect way to control your DiGiCo S-Series console straight from your Apple iPad. It allows remote, wireless control of any DiGiCo S-Series mixing console, both S21 and S31, wherever you are. The DiGiCo S App permanently displays an overview of the console layout, so you can select any available console bank and have the same user-friendly operation you’re already familiar with, but without being tied to your console. What you can control: Channel Setup - +48V, polarity, analogue gain, digital trim, channel delay, insert points on/off, meters Mix – channel label, pan, mute, solo, fader level, meters EQ – 4 band EQ plus HPF/LPF Dynamics – all dynamics parameters for all console dynamics modes Auxes – auxiliary send levels, on/off, auxiliary pans Buss Routing – assignment of channels to busses Snapshots – insert new, recall, update, delete Matrix – sends, on/off Graphic EQ – 32 faders and on/off for each unit, flatten all bands Save Session There is also an overview mode for selecting the Bank that you wish to control. Tap the arrow down symbol in the top right corner of the main view Connection details can be saved for different devices Aux Select buttons can (optionally) activate the Solo function for the relevant Aux Channels. Tap the Aux Menu button a second time to activate/deactivate this function.

OneMix is a cut down version of the Avantis MixPad app that locks control to a single Aux (monitor) mix. Multiple iPads may be set up by the 'Admin' user to give each musician customised personal monitor control via Wi-Fi connection to the Avantis mixer without the risk of affecting the other monitors or FOH main mix. Avantis OneMix can be configured to provide as much or as little control as needed. Logon as a User provides personal control of: - One monitor (Aux) master level and mute - Monitor master PEQ, NEQ and Comp if enabled - Send levels and stereo pan to the monitor - Send Mute, Gate, PEQ, NEQ, Comp if enabled - SoftKeys Logon as Admin allows custom setup: - Set a OneMix session name to identify the user - Choose an Aux (monitor) mix - Assign a 'My Mix' layer and up to 3 custom layers - Assign up to 8 strips on My Mix layer, 32 on custom layers - Assign sends - Inputs, FX returns, Groups - Assign DCA masters - Assign SoftKeys - Assign blank spaces in layers - Name each layer - Enable or disable channel processing and mutes or assigns per layer Requirements: An Allen & Heath Avantis mixer with a suitable wireless router or access point connected to one of its Network ports. This version of OneMix can connect to Avantis mixers running: - Avantis Firmware V2.00 or subsequent V2.0x maintenance releases. - Avantis Firmware V1.30 or subsequent V1.3x maintenance releases, when the Firmware compatibility mode setting is enabled. This can be found in the iOS Settings / Avantis OneMix. You will need to shut down (force quit) the app and restart it for changes to take effect. Refer to the Allen & Heath website for more information and to download the latest mixer firmware.