Bark Filter vs Retrocord

Bark Filter - Critical Band Analyser/Filter/Compressor The multi band filter in Bark takes the approach to match the reception characteristic of the gate where all sounds must pass through: the human ear. The ear behaves as if it contains a bank of filters, each filter passing frequencies within their respective critical band. Two tones apart more than the frequency dependant critical bandwidth are perceived as separate tones. For this reason Bark contains a filter bank with 27 very steep bandpass filters matching the critical bandwidth characteristic of the human ear. In fact, the human ear have also its own built in multi band compression system which are based on the critical bands. Why the name Bark ? The Bark scale is a frequency scale on which equal distances correspond with perceptually equal distances. Above about 500 Hz this scale is more or less equal to a logarithmic frequency axis. Below 500 Hz the Bark scale becomes more and more linear. Multiband compressors can act differently on different frequency bands. The advantage of multiband compression over full-bandwidth compression is that unneeded audible gain changes or "pumping" in other frequency bands is not caused by changing signal levels in a single frequency band. Bark can act both as single band compressor and with up to 27 bands in multiband mode by linking critical bands. The linear phase filter bank with its steep filter slopes can be used for unusually pronounced filter effects too... Features: • Multi band dynamic range compressor with up to 27 bands • Variable number of compressor bands (1..27) • Threshold/Ratio Attack/Release and Makeup Gain • Linear phase precision filters for maximal transparency • Real time pre/post processing calibrated spectrum analyser • AudioUnit for AUv3 compatible hosts. • Inter-app audio compatible effect. • Audiobus 3 compatible with state saving. • Low latency live usage with mic and headphones. • Audio recorder

Retrocord is a retroactive multitrack audio recorder. It works like a tape that's always recording from your selected input, so when you play something worth keeping, you can save the last few minutes — after the fact. How it works Choose your audio input and a buffer length. Retrocord records silently in the background. When you want to keep what you just played, tap a duration to capture. The audio lands in your library as a recording you can play back, edit, organize, and export. Multitrack support Retrocord records every channel your audio input exposes, each as its own track. Connect a class-compliant multichannel USB audio interface — such as the Focusrite Scarlett series or similar — and capture individual inputs as separate stems. Mute and solo tracks during playback, then export them to your DAW to mix and arrange later. Edit before you export Retrocord lets you shape a capture without leaving the app: - Trim — set start and end points against a recording to keep only the part that matters - Split — cut a capture in two at the playhead to create separate recordings - Gain — adjust level in 3 dB steps, up to ±24 dB Your library, on every device Recordings live in an organized library — sessions hold captures, captures hold tracks — with waveforms, names, and durations at a glance. Your library syncs privately across your iPhone, iPad, and Mac through your own iCloud account. Lossless, and smaller Captures are stored as Apple Lossless (ALAC) — full 24-bit, 48 kHz quality at roughly half the size of uncompressed WAV. When it's time to move audio out, export individual tracks or a flattened mix as ALAC or 24-bit WAV, with your trim and gain applied. Use cases - Capturing jams and improvisations without arming a DAW - Recording stems from multichannel audio interfaces - Field recording, where the moment you want has already passed by the time you'd hit record - Interviews and spoken word, where restarting a conversation to get a clean take isn't an option - Practice sessions, rehearsals, and songwriting where good ideas surface unpredictably Details - Works with any class-compliant USB audio interface - Also supports the built-in microphone on iPhone and iPad - Stereo pairing toggle for interleaved L/R channels - Per-track mute and solo during playback - Non-destructive trim, split, and gain - Apple Lossless (ALAC) storage; export to ALAC or 24-bit/48 kHz WAV - Private iCloud sync across your devices, through your own iCloud account - No third-party account, no analytics — your recordings are yours