Accsoon vs ColourTemp

Accsoon Go is an App for Accsoon gimbal and wireless video transmitter products. With the gimbal, the App can be used to tuning the settings of the gimbal, camera control, gimbal remote control, gimbal calibrating and firmware upgrade. 1. Easy motor tuning With the auto tuning, Accsoon Go can adjust motor parameters automatically based off the camera setup. Also, users can further adjust the Motor Power, Speed, Follow Speed, Follow Deadband, Rudder Speed, and Focus control speed of the gimbal. 2. Creative Photography Accsoon gimbals supports panoramic photography, timelapse, motion control and ultra-wide angle photography, users can easily create high quality creative videos and photos by use the App. 3. Update the firmware When future firmware versions are released, users can update the gimbal firmware by the App. With the CineEye Wireless Video Transmitter, the App can turn phones and tablets into professional monitor. The functions of the App are: 1. Gray scale/RGB 2. Focus Assistant 3. False color 4. Histogram 5. Zebra 6. 3D LUT 7. Waveform 8. Video Range/Limited Range 9. Center Marker/Scale Marker/Safe Marker/Marker Color/Marker Width 10. Zoom In/Out with Pinch 11. Anamorphic De-squeeze 12. Wi-Fi Settings

ColourTemp is a colour temperature and flicker detection tool built for working videographers, DPs, cinematographers and gaffers. Point the camera at any light source for an instant Kelvin reading. Switch to flicker mode to detect mains-frequency flicker before it becomes a post problem. COLOUR TEMPERATURE Measure light from 2500K candlelight to 9900K open sky. White balance is locked to a fixed 5600K reference for consistent, repeatable readings across a shoot. Readings are close approximations — a fast, practical guide for the set, not a replacement for a calibrated colorimeter. FLICKER DETECTION Uses 240fps camera sampling and FFT analysis to detect 50Hz and 60Hz mains flicker and harmonics. Also flags PWM dimming on LED fixtures that conventional measurement misses. BANDING RISK CALCULATOR Set your project frame rate and shutter speed. ColourTemp calculates instantly whether your current combination will produce banding — and can snap to a safe setting automatically. FREEZE & COMPARE Pause a reading to lock a reference. Adjust frame rate and shutter speed while the measurement stays frozen — ideal for comparing multiple fixtures or matching practical lamps. CALIBRATION Point at a known 5600K reference and take a five-second calibrated reading. The app stores a custom offset for your device and shooting conditions, improving consistency across a whole production. Built by a working DP — because practical fixtures don't ask permission, and bad light costs money in post. No account. No data collected. Everything runs on your device. Available as an annual subscription or one-off lifetime purchase. Pricing and terms are shown at first launch. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/