TP vs Fire Alarm Tech Toolkit

Omada app is used for configuring and managing your Omada devices. You can change settings, monitor the network status and manage clients, all from the convenience of a smart phone or tablet. STANDALONE MODE Standalone mode is designed for managing EAPs or wireless routers right away without having to spend time configuring a controller. Each device is managed separately. This mode is recommended for networks which only have a few EAPs (or wireless routers) and require only basic functions, such as home network. CONTROLLER MODE Controller mode works together with a software Omada Controller or a hardware Cloud Controller, and is suitable for managing multiple devices (including gateways, switches and EAPs) centrally. Controller mode allows you to configure and automatically synchronize unified settings to the devices in the network. Compared to Standalone Mode, more configuration options are available and supports to manage more devices in Controller mode. You can manage devices in Controller mode in two ways: via Local Access or Cloud Access. In Local Access mode, the Omada app can manage devices when the Controller and your mobile device are in the same subnet; in Cloud Access mode, the Omada app can access the Controller across the internet so you can manage your devices wherever you are. Compatibility List: The controller mode currently supports hardware cloud controllers (OC200 V1, OC300 V1), software Omada Controller v3.0.2 and above. (To experience more features support and more stable services, we recommend that you upgrade your controller to a new version). Standalone Mode currently supports the following models (with latest firmware): EAP245 (EU)/(US) V1 EAP225 (EU)/(US) V3/V2/V1 EAP115 (EU)/(US) V4/V2/V1 EAP110 (EU)/(US) V4/V2/V1 EAP225-Outdoor (EU)/(US) V1 EAP110-Outdoor (EU)/(US) V3/V1 EAP115-Wall (EU) V1 EAP225-Wall (EU) V2 ER706W (EU)/(US) V1/V1.6 ER706W-4G (EU)/(US) V1/V1.6 *The latest firmware is required and can be downloaded from https://www.tp-link.com/omada_compatibility_list. More devices supported by the app are coming!

Fire Alarm Tech Toolkit is a field app for fire alarm technicians who need fast calculations, organized project records, service tracking, and professional reports while working on site. Bring everyday fire alarm tools into one place. Use DIP switch and rotary dial addressing, barcode and QR scanning, battery load calculations, battery date decoding, conduit fill calculations, resistor band references, and technician-focused utilities for service, inspection, troubleshooting, installation, and documentation. Create projects for buildings, panels, floors, and devices. Record device type, location, address, serial number, zone, status, notes, tags, and service dates. Track smoke and heat detectors, pull stations, duct detectors, notification appliances, modules, panels, annunciators, batteries, flow and tamper switches, extinguishers, and other fire protection assets. Service Mode helps technicians work through devices by project, floor, or asset type. Record completed service, dirty devices, trouble conditions, missing or replaced devices, inaccessible assets, extinguisher recharge or hydro requirements, and other field results. Site Notes keeps job details and observations organized with each project. NEW FIELD WORKFLOWS • Shared Scan lets one technician scan device barcodes while another technician receives and organizes the records. • Scan to Plan allows devices to be placed directly on an imported floor plan for faster mapping and documentation. • Barcode Sheet Printing creates printable barcode or QR code sheets for device labeling and field identification. The scanner captures serial numbers and QR codes with duplicate detection and can add scanned values directly to device records. Addressing tools can also send calculated values into records to reduce repeated typing. Generate project PDFs, floor reports, service reports, dirty device reports, extinguisher reports, status reports, CSV exports, and project summaries. Share reports through the device share sheet or create an expiring project link and QR code to transfer project data. KEY FEATURES • Fire alarm field calculators • DIP switch and rotary dial addressing • Barcode and QR scanning • Battery load and date code tools • Conduit fill and resistor references • Project, floor, and device records • Service tracking for devices and extinguishers • Shared Scan collaboration • Scan to Plan floor-plan mapping • Printable barcode and QR code sheets • PDF, CSV, and text reports • Project links and QR transfer • Dark, field-friendly interface MONTHLY SUBSCRIPTION PLANS Solo Pro — $4.99/month Premium tools and features for an individual technician. Team — $24.99/month A shared workspace for a small team to collaborate on projects and records. Company — $44.99/month Higher workspace limits and advanced company features for larger operations. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Feature availability, workspace limits, storage, and collaboration options vary by plan. Prices shown are in USD. The App Store displays the applicable local price before purchase. Subscriptions automatically renew unless auto-renew is turned off at least 24 hours before the end of the current billing period. Fire Alarm Tech Toolkit is made for technicians who want faster field entry, fewer scattered notes, better collaboration, and cleaner project handoffs. IMPORTANT Fire Alarm Tech Toolkit is independent and is not affiliated with, endorsed by, or sponsored by any manufacturer or brand. Names such as Honeywell, Fire-Lite, Silent Knight, Notifier, System Sensor, Edwards, EST, Kidde, Siemens, Simplex, Johnson Controls, Potter, Bosch, Mircom, Gentex, Wheelock, Eaton, Gamewell-FCI, Hochiki, Apollo, Power-Sonic, CSB, Yuasa, Deka, East Penn, EnerSys, Ansul, Amerex, Buckeye, and others are trademarks of their respective owners and are referenced only for technician search and field identification context.