Sonic Remote vs CoronaSDR

Remote Control for the SM Series Wireless Transmitters with Voice Output. Quick and easy remote control for your SM Series transmitters by sending a coded audio signal through an attached microphone with your iPhone oriPad. Includes sounds for : - Sleep mode (on / off) - Lock mode (lock / unlock) - Power mode (25mW / 50 mW / 100 mW / 250 mW) - Audio gain (0 - 44) - Frequency Mode (486.400 - 870.375 MHz / Block 19 - 33) - Lowcut frequency (35 - 150 Hz) - LED (on/off) All sounds can be played with an optional voice command in multiple languages  (English, German, French, Chinese, Japanese, Spanish and Portuguese). The voice commands can be changed individually for each language. Frequencies can be selected by block and channel or entered alphanumerically in 100 kHz or 25 kHz steps. It is also possible to control a transmitter with different frequency blocks by entering the hexadecimal value (0 - F).  However, the displayed frequency will not match the actual frequency set. SonicRemote supports dark mode and a volume control that is not connected to your device's mute switch. Due to regional settings, the power sounds may not work as intended. In this case, an alternative set can be used Your receiver must be software and hardware enabled for remote control.  Some of the implemented features may not be supported due to series or software version.

Explore the radio spectrum from your iPhone or iPad. CoronaSDR connects to an RTL-SDR receiver through a rtl_tcp server on your local network, bringing live tuning, audio, spectrum, and waterfall displays to your screen. LISTEN AND EXPLORE • Receive AM, narrow FM, wide FM stereo, USB, LSB and CW. • Find signals with the live spectrum and waterfall. • Tune by dragging across the spectrum and adjust receive bandwidth, squelch, and gain. • Scan saved stations or a frequency range. • Keep listening in the background with system playback controls. NEW: CW AND FT8 DECODING • Turn a selected CW signal into text, with listening-pitch and decoding-speed controls. • Receive FT8 messages with a message history, details, and text sharing. • Mute listening audio while decoding continues in the foreground. • Freeze displayed results to read them while reception continues. CW and FT8 decoding are receive-only and currently experimental. Decoding requires an active receiver connection and pauses when the app moves to the background. Some signals and messages may be missed. FT8 reception times are estimates. SAVE YOUR STATIONS • Organize favorites with tags. • Import and export station lists in CSV or TSV format. • Return to saved frequencies and listening modes. ADJUST YOUR RECEIVER • Set gain and frequency correction in PPM. • Control direct sampling, offset tuning and bias tee where supported by your receiver and server. • Adjust audio filters, audio gain control and noise blanking. • Use deep links to open listening actions. REQUIREMENTS • iPhone or iPad running iOS 18 or later. • An RTL-SDR receiver connected to a running rtl_tcp server on your local network. • A suitable antenna for the signals you want to receive. Receiver hardware, antenna, and server are required separately. Available frequencies and reception quality depend on your equipment and setup. CoronaSDR is free and open source.