Comparison

Discord4 vs SoundSaw

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Discord4

This stereo pitch-shifting delay app offers three distinct algorithms for vintage, clean, or experimental granular effects. It features tempo-synced delays, a reverb in the feedback loop, and flexible LFO modulation for extensive sound design. Control pitch shifts with MIDI and fine-tune effects with buffer size adjustments.

Highlights
  • Three pitch-shifting algorithms (Vintage, Clean, Granular)
  • Tempo-synced and free-running delays
  • Reverb in feedback loop for shimmer effects
  • Flexible LFO modulation
  • MIDI note control for pitch shifting
  • True stereo operation with panorama controls
  • Resizable vector-based GUI
Features
Read full description

Discord4 is the Audio Damage stereo pitch shifter, in its fourth generation. Each channel has its own pitch shifter, delay, bandpass filter, and feedback, and every repeat runs back through the shifter, so the same effect can double a vocal, stack fifths into an arpeggio, or send echoes spiraling up or down. Three engines set the character. Vintage is modeled on the H910 and H949 and has their grainy, glitchy character. Modern is cleaner and more transparent. Both have a buffer control from 32 to 2048 samples that changes the character of the shift. Granular cuts the signal into grains from 15 to 100 ms long, with an interval control and a Chaos knob that scrambles them, for anything from soft clouds to complete destruction. Detune the two sides a few cents in opposite directions over a short delay for a wide doubler. Set one side a fifth up, sync the delays, and raise the feedback so each repeat climbs another step. Keep the reverb in the loop for shimmer, then hit Freeze to hold a pad under the part. Turn on MIDI Shift to play harmonies from a keyboard, or ride the pitch wheel for bends. • Three pitch-shift engines: Vintage, Modern, and Granular • True stereo: each side has its own shifter, delay, filter, feedback, and pan, or link them so the right follows the left • Up to three octaves up or down, set by the cent or locked to semitones • Delays up to two seconds per side, free-running or tempo-synced, with feedback and cross-feedback • A bandpass filter in each feedback path, set from an XY pad • A stereo reverb inside the loop, with Freeze to hold the tail indefinitely • Saturation in the loop to keep runaway feedback in check • Two flexible LFOs for pitch, delay time, and filter frequency, shaped by Wave, Skew, and Warp, free from 0.01 to 14 Hz or synced to tempo • MIDI Shift: play the shift amount from a keyboard, with pitch bend, in hosts that send MIDI to effects • A preset browser with folders and favorites, and 50 factory presets from everyday doubling to the thoroughly strange Discord4 runs as an AUv3 plugin inside any compatible iOS host, including AUM, Cubasis, Drambo, and apeMatrix, and as a standalone app with background audio for live input. It is also available for macOS, Windows, and Linux as a desktop plugin. Requires iOS 16 or later. An AUv3 host app is recommended. No subscriptions. No accounts. No nonsense. Buy it once, own it forever.

About

SoundSaw

This app offers advanced sound processing for musical instruments and voice, enabling users to create noise, lo-fi, chiptune, and experimental audio aesthetics. It features a variety of distortion, bitcrushing, and filtering effects with a user-friendly interface.

Highlights
  • Simulates electronic circuit signal processing
  • Maximizer with feedback and hold modes
  • Overload effect for harmonic saturation
  • Decimator and Bitcrusher for digital artifacts
  • Controllable Feedback effect
  • 4-pole filter with envelope generator
  • Output filter and signal mixing
Features
Read full description

SoundSaw is a complex sound processing app with easy-to-use controls designed to distort the sound of musical instruments or voice, and give the sound the aesthetics and atmosphere of noise, lo-fi, chiptune and experimental music scene. Depending on the settings, it can add light distortion and saturation to the sound for a more natural and lively sound, or drastically change the sound and make it as loud and harsh as possible, full of all kinds of harmonics, crackles and rattles. The settings of this app provide great opportunities for experiments with sound destruction. All controls are located on a single screen, grouped by function into six sections with a plain way of signal path from the first section "Input" to the last section "Output". The chain of individual effects in this app is designed in such a way as to get the most interesting result for any parameter values in the widest possible range. App features: - Simulates different types of signal processing electronic circuits and their typical harmonic saturation and noise (static and dynamic). - The Maximizer keeps the maximum signal level for more noticeable distortions and feedback effects, and has a mode for hold the maximum volume when the input signal decays. - The Overload effect works like an electronic circuit when the signal is much higher than the maximum allowable level and oversaturated the signal various kinds of harmonics. - The Decimator and Bitcrusher effects produce very noticeable digital artifacts typical of cheap devices with simple DACs / ADCs, and add various kinds of crackles and rattles. - The Feedback effect is similar to acoustic feedback, but more controllable, with the resonant frequency varying in accordance with the harmonics of the input signal. - The 4-pole filter controlled by the envelope generator can be used after distortion effects. Filter types: Low pass, High pass, Band pass and Notch. - The envelope generator is controlled by the input signal and can generate a single cycle of envelope, repeat cycles or work continuously. - At the output there is a filter that can cut the high or low range of the original signal and mix it with the processed signal. Demo: https://www.youtube.com/watch?v=SGtCRrqSqwk https://www.youtube.com/watch?v=Wr12DJTWRmI SoundSaw is a universal application for iOS and macOS. It can work on iPhone and iPad as well as Mac / MacBook with M1 chip (and later). SoundSaw works on iPhone and iPad standalone, as an Audio Unit or Inter-App Audio module, and supports Audiobus and Ableton Link. On macOS, SoundSaw can works both as a standalone application and as an Audio unit (AUv3) with DAWs and audio unit hosts like Ableton Live, Logic Pro, GarageBand, MainStage, Cockos Reaper, Plogue Bidule, Hosting AU, and other hosts that support AUv3 plugins. All application features are available on iOS and macOS, including MIDI support (with a MIDI learn option) and audio unit parameters. SoundSaw has a built-in detailed description of all parameters also available as PDF file on application site. You can find more information on SoundSaw and other experimental and audio processing apps at: https://motion-soundscape.blogspot.com

Screenshots

Discord42 screens
SoundSaw3 screens

Verdict

The call

The clearest difference is review sentiment: SoundSaw at 100% against Discord4's 61%. SoundSaw also leads on update cadence (every 2 months vs every 14 months) and rating (4.9 vs 4.7). Discord4's advantage is price ($3.99 vs $5.99). On ratings volume, ads, in-app purchases and monetization model there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Discord4 costs $3.99 and SoundSaw $5.99 up front. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

SoundSaw holds the better App Store score, 4.9 against 4.7. Both are backed by a comparable volume of ratings — 31 and 14 respectively. Written reviews point the same way: 61% of Discord4's written reviews are positive against 100% of SoundSaw's.

UpkeepUpdate frequency

Discord4 ships an update every 14 months, SoundSaw every 2 months. The most recent releases landed on November 19, 2026 and November 16, 2026 respectively.

Scorecard5 real differences · 5 level
Discord4 versus SoundSaw: the parameters behind the verdict, then further details
ParameterDiscord4SoundSaw
Price$3.99 — better$5.99
Rating4.7 (31 ratings)4.9 (14 ratings) — better
Positive reviews61.1% of reviews100.0% of reviews — better
Number of ratings31 — better14
Update frequencyEvery 14 monthsEvery 2 months — better
AdsNoNo
In-app purchasesNoNo
MonetizationPaidPaid
DevicesiPhone, iPadiPhone, iPad, iPod — better
Requires iOS16.013.4 — better
Further details — not scored
Size29 MB12 MB
Age rating4+4+
DeveloperAudio Damage, Inc.Igor Vasiliev

Customer experience

Discord4

All ratings29 ratings
Positive93.1%
Neutral0.0%
Negative6.9%
Written reviews18 reviews
Positive61.1%
Neutral11.1%
Negative27.8%

SoundSaw

All ratings14 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews5 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

Discord4

No in-app purchases

None

SoundSaw

No in-app purchases

Questions

Is Discord4 free?
Discord4 costs $3.99, with no in-app purchases.
Is SoundSaw free?
SoundSaw costs $5.99, with no in-app purchases.
Which has better reviews, Discord4 or SoundSaw?
SoundSaw is rated higher. Discord4 averages 4.7 out of 5 from 31 ratings, while SoundSaw averages 4.9 from 14 ratings.
Do Discord4 or SoundSaw have ads?
Neither Discord4 nor SoundSaw shows ads.
Which is updated more often, Discord4 or SoundSaw?
Discord4 ships an update every 14 months, and SoundSaw every 2 months. Most recently, Discord4 was updated on November 19, 2026 and SoundSaw on November 16, 2026.

Other comparisons