apeMatrix vs AltiSpace 2

Holding true to the standard of apeSoft, apeMatrix continues to push the limits of possibilities in music creation. Automating almost every aspect of linked control, apeMatrix brings all your creation tools together and links them both in MIDI and audio. Letting you inject all your favorite FX both AU and IAA in a very easy and intuitive way. apeMatrix can also assign its Control Manager MIDI, Accelerometer, Scrub and LFO’s to modulate every built-in parameter and any parameter available inside the AUv3 (Audio Unit Plugins). apeMatrix offers 10 slots on each of the three Matrix grids with 2 bus slots on each grid that make it possible to interconnect all 3 Matrix. The MIDI Patch-bay also offers endless possibilities for MIDI routing and control in a similar grid design for both internal and external MIDI control. So you can send and receive MIDI and have ultimate control over where it’s routed. Each Audio Connection on the grid has its own gain control. Just tap on the node and drag will give you the full range of volume control. Or use Mixer to controls the RAU output and automate them using apeSoft’s unique Control Manager MIDI, Accelerometer, Scrub and LFO’s to modulate every built-in parameter and any parameter available inside the AUv3 (Audio Unit Plugins). Turn each slot on or off by a control switch on the Matrix or MIDI control. Control output, pan, mute and solo of each slot and Master output of each Matrix with the built in mixer control or MIDI control. Route your sounds through all a series of FX or route multiple sounds through the very some FX. The possibilities are as endless as your creativity. FEATURES High quality audio up to 32-bit 96kHz Supports Audio Unit extensions, Inter-App Audio Supports multi-channel inputs/outputs audio interfaces Supports Audio Unit Multi-bus input/output (side-chaining) 3 Matrix Audio 3 MIDI Matrix 10 Open Slots per Matrix (hosts up to 30 plugins) 2 Audio Bus Slots per Matrix 2 MIDI Bus Slots per Matrix MIDI Monitor Multi-Channel Audio Route AudioUnit Audio Send Receive Buses MIDI Scale Filtering, Transpose etc… Control Manager (MIDI, Accelerometer, LFO, Scrub) for all Built-In Parameters Control Manager (MIDI, Accelerometer, LFO, Scrub) for all AUv3 (Audio Unit Plugins) Presets Manager and Morphing Pad Save Custom AUv3 Presets Session Saving/Load Save/Load View’s Frame in Presets Transport to sends host sync to Audio Unit plugins and IAA Integrated and configurable MIDI keyboard with scales Connections output and panning controls Post Dynamic Processor Audiobus and Inter-Audio App (Sender and Fx) Audiobus state saving Ableton Link Precise MIDI Clock In/Out AudioShare Compatible AudioCopy Compatible MIDI Manager: Virtual Midi and Network, 14 bit NRPN controllers File Manager, sharing common audio files via iTunes, Dropbox and AudioCopy etc… Variable Sampling Rate (up to 96 kHz) Variable Buffering Size Variable UI Color Schemes BUILT-IN AUv3 (compatibles with other audio hosts) Configurable Sampler with scrub, playable via MIDI V-Meters Oscilloscope/Spectralscope Sender/Receiver (up to 16 buses) Send MIDI messages with LFO Gain/Pan

AltiSpace is a convolution reverb app with advanced controls that provides realistic sounding natural acoustic space or the most famous reverb devices for any track or mix. A convolution reverb takes a captured sample (called an impulse response) from a real-world space or hardware and uses this to digitally simulate the reverberation of that space or device down to the last detail and nuance. Because it is sampled, not synthesized, convolution reverb is known for its stunning realism, and it is widely considered to be the best type of reverb. However, unlike the more common algorithmic reverbs, convolution reverbs usually does not have much control over the reverberation process. But AltiSpace, in addition to the ability to load your own impulse response files and a built-in library of real reverb device presets, has advanced settings such as EQ, gate, ducking, modulation and more. You can change the original impulse response parameters to something completely new and then save it as a new preset. This app has an easy-to-use user interface, where all the main controls are located on the single screen, and it is ready to use right out of the box, even without additional settings. And at the same time, you can easily change the parameters of the impulse responses from the built-in library to create your own sound. App features: Ability to import your own impulse response files. A large built-in library of presets from the most famous hardware reverbs. Convenient preset manager with the ability to group and search presets. Presets can be marked as favorites for display in the favorites group. Supports MIDI controllers (also Bluetooth) with learn or manually assign mode. Reverb can work with a stereo or mono input and convert it to stereo. Add dynamic noise before reverb for a more natural sound. The gate allows you to turn on the reverb when the threshold is exceeded. The ducking allows you to turn off the reverb when the threshold is exceeded. Sets the minimum reverb level for Gate and Ducking modes. Equalizer with high and low cut filters in chain before or after reverb. Changing the time (length) of the current impulse response. Possibility to set a fade out point for a smooth end of the impulse response. Sets the pre-delay time of the signal before reverb. Experimental feature to change the pitch of the impulse response. Amplifying early or late reflections. Adjusts the stereo image before the reverb. Haas effect for adding stereo space to a mono signal. Sets the depth and frequency of modulation the signal before reverb. Mixing dry / wet signal and adjusting the output level. Four-channel mode for better stereo ambience. Input and output level meters. Indicators of possible input clipping for standalone. Prevents any output clipping for standalone. Built-in full description of all controls. Demo: https://www.youtube.com/watch?v=WBHxgjkGCoU https://www.youtube.com/watch?v=GLNi9wHaGew https://www.youtube.com/watch?v=A3RPopor9gI AltiSpace is a universal application for iOS and macOS. It can work on iPhone and iPad as well as Mac / MacBook with M1 chip (and later). AltiSpace works on iPhone and iPad standalone, as an Audio Unit or Inter-App Audio module, and supports Audiobus. On MacOS, AltiSpace can works both as a standalone application and as an Audio unit (AUv3) with DAWs and other hosts that support AUv3 plugins. AltiSpace has a built-in detailed description of all parameters also available as PDF file on the application site. You can find more information on AltiSpace and other creative audio apps at: https://motion-soundscape.blogspot.com