Air Command vs KTI KWR Bluetooth App
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Air Command
Control your Air Command system by setting desired pressure levels and monitoring its current status. The application also provides fault detection to ensure optimal performance.
- Set desired pressure
- Detect system faults
- Monitor system status
- Air Command system control
Read full descriptionHide full description
Firestone Air Command lets you connect to a compatible Firestone air system over Bluetooth to monitor and control pressure from your iPhone and from CarPlay. Use Air Command to view current and target pressure, adjust pressure settings, check system status, and review active faults in a clean, driver-friendly interface. What’s new in this release: CarPlay support for in-vehicle access, a direct in-app Support link for faster help, and updated graphics throughout the app. Air Command is designed for compatible Firestone hardware and requires Bluetooth to communicate with the external control module. Requires iPhone running iOS 15.0 or later.
KTI KWR Bluetooth App
Read full descriptionHide full description
Use this mobile app to connect your Apple device to control your KTI Hydraulics power unit. Current supported devices are KWR-005, KWR-006, KWR-007, and KWR-008. Please observe all safety precautions before using this device. Please also make sure to turn your KWR device off when it is not in use. We have a full manual located on our website at https://ktihydraulicsinc.com/products/kwr-005-bluetooth-2/. We also have an extended manual at https://ktihydraulicsinc.com/wp-content/uploads/2020/10/KWR-005-Extended-Manual.pdf. Please read through carefully before operating the device. This app is for devices that have the following serial number format - KWR##-MMDD####. For devices that have KTI##### serial format, please email us at info@ktihydraulicsinc.com for support.
Screenshots
Verdict
The clearest difference is iOS requirement: KTI KWR Bluetooth App at 11.0 against Air Command's 15.0. On price, ads, in-app purchases and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Neither carries in-app purchases, so what you see is what you pay.
| Parameter | Air Command | KTI KWR Bluetooth App |
|---|---|---|
| Price | Free | Free |
| Positive reviews | 14.3% of reviews | — |
| Update frequency | Every 5 months | — |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Free | — |
| Devices | iPhone, iPad, iPod | iPhone, iPad, iPod |
| Requires iOS | 15.0 | 11.0 — better |
| Further details — not scored | ||
| Size | 79 MB | 9 MB |
| Age rating | 4+ | 4+ |
| Developer | Riverside Mfg., LLC | KTI Hydraulics Inc |
Bugs and requests
Air Command
Reported bugs
80 issues- App constantly freezes up
- App stopped working after update
- App just spins and times out
- App goes crazy
- App works when it wants to
Show 75 moreShow fewer
- App has never worked properly
- App constantly freezes up
- System went completely haywire
- M1 is at 10 PSI and M2 has jumped to 103 PSI
- System no longer allows you to set your own pressure
- App will not reconnect to ECU if you get out of Bluetooth range
- ECU does not automatically refill the bags back to set pressure
- System not working
- App goes into the OTA mode
- Looses connection to iPhone
- Looses connection on iPhone blue tooth
- Memory Function does not work
- Compressor will attempt to inflate the bags to maximum pressure
- Compressor will not shut off
- Constant leak detect fault when no leak is actually there
- No fault reset
- Have to unplug the ECU to reset
- App doesn’t look or act like described
- Air pressure went down over several days
- Red needle started jumping from 0 to 150
- App doesn’t connect
- Connection issues
- While towing an giant trailer bang can’t connect
- Let all the air out of the bags
- Since the last few iPhone updates doesn’t connect
- Never connects to the system via Bluetooth
- ECU no longer maintaining pressure after closing the app
- App isn’t connecting wth ecu
- App not conect
- No able to connect even after disconnecting the battery, fuse, and ECU
- App wasn’t connecting for a few months
- Recent update has convinced me to return units
- Update does not work
- Can no longer connect to the compressor
- Will not connect to ecu
- If it does it might work once
- Pulling fuses over and over
- Deleting re-installing
- New one doesn’t connect
- Asks for a passcode which was never used before
- Compressor is useless because of an app
- Worthless
- Firestone still doesn’t have a clue
- Yellow ignition wire is NOT used with this particular controller
- Yellow ignition wire connected with a jumper
- Causes all kinds of problems with the Air Command App
- ECU unplugged and plugged back in
- App doesn’t work
- App will never connect to your system
- Doesn’t connection
- App doesn’t work
- App is promoted with the air rite system
- App doesn’t work
- App is junk
- Never connects to ECU
- Customer service had no idea how to fix it
- App doesn’t work
- Won’t connect
- Offer no help to your customers
- App does nothing
- Won’t connect no matter what you do
- App not finished
- Won’t save pressure settings
- Have to remember to set the pressure each and every time you drive
- Garbage
- Won’t connect to the ECU
- App is garbage
- Won’t connect to ECU
- Tried pulling the fuse and replacing while in pairing mode
- Still won’t connect
- Works but app seems unfinished
- No way for me to have the pump go to the memory pressure set point
- Connects but says everything is wrong
- Fails to connect to RIDE RITE at all
- Support is non existent for this app
Requested features
16 requests- Make this app work on CarPlay
- Would be nice to have the app work with Apple Car Play
- App should be controlled through Car Play
- Need help with OTA mode
- Fix connection issues with iPhones
Show 11 moreShow fewer
- Fix app not connecting to ECU
- Fix app not connecting to compressor
- Fix app asking for a passcode
- Fix app not saving pressure settings
- Fix app not going to memory pressure set point
- Fix app saying everything is wrong
- Develop app to connect to controller
- Fix app not connecting to ECU
- Fix app not connecting
- Fix app not connecting to ECU
- Fix app not connecting to ECU
KTI KWR Bluetooth App
Not enough reviews yet to summarise bugs or requests.
In-app purchases
Air Command
No in-app purchases
KTI KWR Bluetooth App
No in-app purchases
Questions
Is Air Command free?
Is KTI KWR Bluetooth App free?
Do Air Command or KTI KWR Bluetooth App have ads?
Other comparisons
