Air Command vs SpecScan VIN Decoder
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Air Command
Control your Air Command system by setting desired pressure levels and monitoring its current status. The application also provides fault detection to ensure optimal performance.
- Set desired pressure
- Detect system faults
- Monitor system status
- Air Command system control
Read full descriptionHide full description
Firestone Air Command lets you connect to a compatible Firestone air system over Bluetooth to monitor and control pressure from your iPhone and from CarPlay. Use Air Command to view current and target pressure, adjust pressure settings, check system status, and review active faults in a clean, driver-friendly interface. What’s new in this release: CarPlay support for in-vehicle access, a direct in-app Support link for faster help, and updated graphics throughout the app. Air Command is designed for compatible Firestone hardware and requires Bluetooth to communicate with the external control module. Requires iPhone running iOS 15.0 or later.
SpecScan VIN Decoder
Instantly determine a car's real market value using its VIN. Decode year, make, model, and factory options, then compare against live dealer listings. Ideal for buyers, sellers, enthusiasts, and dealers.
- Real market value with confidence rating
- Comparable listings with prices and links
- Deal analysis and offer price suggestions
- Factory options decoded from VIN
- Buyer guidance and negotiation tips
- VIN scanning via door-jamb barcode
Read full descriptionHide full description
SpecScan tells you what a car is actually worth — instantly, from its VIN, priced against the live market instead of generic book values. Enter any VIN (or scan the door-jamb barcode) and SpecScan decodes the exact year, make, model, trim, and factory options, then values it against real dealer listings for the same car — the way a seasoned dealer prices inventory. Built by an exotic and performance car dealer, SpecScan is tuned for the vehicles mainstream valuation tools get wrong: Porsche, Ferrari, Lamborghini, McLaren, Corvette, Shelby and other performance and collector cars, where options, mileage, and trim can swing value by tens of thousands of dollars. WHAT YOU GET • Real market value with a confidence-rated price range • Comparable listings — actual cars for sale now, with prices, mileage, and links • Deal analysis — enter an asking price and see if it's a good, fair, or over-market deal • What to offer — accept / target / aggressive price points, plus a red-flag "too cheap" line • Options that matter — factory options decoded from the VIN, with resale impact • Buyer guidance — mileage context, history checks, and negotiation tips WHO IT'S FOR • Buyers who don't want to overpay • Sellers pricing a car to move • Enthusiasts and collectors tracking what their car is worth • Dealers sizing up trades and acquisitions Free to download, with complimentary scans every month. Questions or feedback? support@specscan.net — Terms of Use: https://specscan.net/terms Privacy Policy: https://specscan.net/privacy
Screenshots
Verdict
The clearest difference is rating: SpecScan VIN Decoder at 5.0 against Air Command's 1.0. SpecScan VIN Decoder also leads on update cadence (every 8 days vs every 5 months). Air Command's advantage is in-app purchases (none vs 3) and ratings volume (4 vs 1). On price, ads, monetization model and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. SpecScan VIN Decoder sells 3 in-app purchases, starting at $19.99 per month. Air Command asks for nothing beyond the download.
SpecScan VIN Decoder holds the better App Store score, 5.0 against 1.0. Both are backed by a comparable volume of ratings — 4 and 1 respectively.
Air Command ships an update every 5 months, SpecScan VIN Decoder every 8 days. The most recent releases landed on October 25, 2026 and October 24, 2026 respectively.
| Parameter | Air Command | SpecScan VIN Decoder |
|---|---|---|
| Price | Free | Free |
| Rating | 1.0 (4 ratings) | 5.0 (1 ratings) — better |
| Positive reviews | 14.3% of reviews | — |
| Number of ratings | 4 — better | 1 |
| Update frequency | Every 5 months | Every 8 days — better |
| Ads | No | No |
| In-app purchases | No — better | Yes |
| Monetization | Free | Free |
| Devices | iPhone, iPad, iPod — better | iPhone, iPod |
| Requires iOS | 15.0 — better | 15.5 |
| Further details — not scored | ||
| Size | 79 MB | 44 MB |
| Age rating | 4+ | 4+ |
| Developer | Riverside Mfg., LLC | SpecScan LLC |
Customer experience
Air Command
SpecScan VIN Decoder
Bugs and requests
Air Command
Reported bugs
80 issues- App constantly freezes up
- App stopped working after update
- App just spins and times out
- App goes crazy
- App works when it wants to
Show 75 moreShow fewer
- App has never worked properly
- App constantly freezes up
- System went completely haywire
- M1 is at 10 PSI and M2 has jumped to 103 PSI
- System no longer allows you to set your own pressure
- App will not reconnect to ECU if you get out of Bluetooth range
- ECU does not automatically refill the bags back to set pressure
- System not working
- App goes into the OTA mode
- Looses connection to iPhone
- Looses connection on iPhone blue tooth
- Memory Function does not work
- Compressor will attempt to inflate the bags to maximum pressure
- Compressor will not shut off
- Constant leak detect fault when no leak is actually there
- No fault reset
- Have to unplug the ECU to reset
- App doesn’t look or act like described
- Air pressure went down over several days
- Red needle started jumping from 0 to 150
- App doesn’t connect
- Connection issues
- While towing an giant trailer bang can’t connect
- Let all the air out of the bags
- Since the last few iPhone updates doesn’t connect
- Never connects to the system via Bluetooth
- ECU no longer maintaining pressure after closing the app
- App isn’t connecting wth ecu
- App not conect
- No able to connect even after disconnecting the battery, fuse, and ECU
- App wasn’t connecting for a few months
- Recent update has convinced me to return units
- Update does not work
- Can no longer connect to the compressor
- Will not connect to ecu
- If it does it might work once
- Pulling fuses over and over
- Deleting re-installing
- New one doesn’t connect
- Asks for a passcode which was never used before
- Compressor is useless because of an app
- Worthless
- Firestone still doesn’t have a clue
- Yellow ignition wire is NOT used with this particular controller
- Yellow ignition wire connected with a jumper
- Causes all kinds of problems with the Air Command App
- ECU unplugged and plugged back in
- App doesn’t work
- App will never connect to your system
- Doesn’t connection
- App doesn’t work
- App is promoted with the air rite system
- App doesn’t work
- App is junk
- Never connects to ECU
- Customer service had no idea how to fix it
- App doesn’t work
- Won’t connect
- Offer no help to your customers
- App does nothing
- Won’t connect no matter what you do
- App not finished
- Won’t save pressure settings
- Have to remember to set the pressure each and every time you drive
- Garbage
- Won’t connect to the ECU
- App is garbage
- Won’t connect to ECU
- Tried pulling the fuse and replacing while in pairing mode
- Still won’t connect
- Works but app seems unfinished
- No way for me to have the pump go to the memory pressure set point
- Connects but says everything is wrong
- Fails to connect to RIDE RITE at all
- Support is non existent for this app
Requested features
16 requests- Make this app work on CarPlay
- Would be nice to have the app work with Apple Car Play
- App should be controlled through Car Play
- Need help with OTA mode
- Fix connection issues with iPhones
Show 11 moreShow fewer
- Fix app not connecting to ECU
- Fix app not connecting to compressor
- Fix app asking for a passcode
- Fix app not saving pressure settings
- Fix app not going to memory pressure set point
- Fix app saying everything is wrong
- Develop app to connect to controller
- Fix app not connecting to ECU
- Fix app not connecting
- Fix app not connecting to ECU
- Fix app not connecting to ECU
SpecScan VIN Decoder
Not enough reviews yet to summarise bugs or requests.
In-app purchases
Air Command
No in-app purchases
SpecScan VIN Decoder
- SpecScan Starter$19.991 Month
- SpecScan Pro$49.991 Month
- SpecScan Ultimate$99.991 Month
Questions
Is Air Command free?
Is SpecScan VIN Decoder free?
Which has better reviews, Air Command or SpecScan VIN Decoder?
Do Air Command or SpecScan VIN Decoder have ads?
Which is updated more often, Air Command or SpecScan VIN Decoder?
Other comparisons
