EOB PT vs EVOLVEO CAM

With the EOB PT-WiFi application, your heating is still under control. Set the temperature or the entire weekly program, configure the entire system and control multiple thermostats from one application. Control options: 1) The application is connected to the thermostat via a WiFi network or data via the ELEKTROBOCK server and you can conveniently control and program the thermostat from anywhere. 2) The application is connected to the thermostat via a local WiFi network and you can conveniently control and program the thermostat anywhere in range of your network (if you own a public IP address, you can access the thermostat even outside the local network). 3) The application is connected to the thermostat via the AP- access point thermostat and you can conveniently control and program the thermostat anywhere in range of this network. 4) The application allows connection with a thermostat even via a USB cable (for PC version only). 5) In the event of a WiFi fault, the thermostat can also be controlled manually. Other benefits and features of the application: - choice of system configuration via WiFi or via USB (PC only) - adding users to control one thermostat - multiple thermostats can be controlled from one application - Display the current room temperature wherever you are - Changing the required temperature - Setting up to 7 week programs - 2 additional programs for even/ odd week mode - AUTO / MANU mode selection - Pre-heating function - Choice of three regulation types (Hysteresis / PI / PID ) - summer mode - Permanently off-off mode - holiday function - Key lock with code - Boiler maintenance - temperature correction - Setting the temperature range - service mode with code - Test the correct connection - Device reset option (Service mode only) More information at http://www.elektrobock.cz/termostat-s-wifi-modulem/p1731

App designed for use with EVOLVEO Strongvision PRO and older devices. -For 4GA no GPS -device not support GPS -Setting can be saved only in TEST mode -Sending notification on Your screen -All pictures directly to cloud -All settings from Your iPhone - no nedd to set in camera menu -Capture photo directly from your iPhone -Support of new Evolveo products -Support LiveView and data administration for PRO devices App has several main functions: 1): After phone number is set you can received photo from Your EVOLVEO Camera 2): After synchronization setting, you can view the camera: signal strength, battery power and memory space of memory card 3): Upload the pictures and videos to APP's cloud 4): Control camera taking and recording 5): Multilingual selection Files stored in the cloud are of reduced size, approximately 100 KB per image and 2 MB per video, compared to the original files saved on the device’s SD card. The cloud storage capacity is 128 MB. Once the storage is full, the oldest files will be overwritten. Files remain in the cloud for 30 days before being permanently deleted. The camera can be shared with an unlimited number of users. Full-size files are always stored on the SD card in the device. They can also be downloaded via the app to the app’s gallery and subsequently saved to the device; however, this increases the amount of mobile data used by the operator.