EOB WIFI vs EVOLVEO CAM

This application is used for remote control of selected WiFi devices from ELEKTROBOCK company. Supported devices: TS11 WiFi, TS11 WiFi Therm, TS11 WiFi Therm PROFI, PT14-P WiFi 1. Smart Plug TS11 WiFi - scheduler with up to 16 changes per day - timer function (1 min to 23 h 59 min) - automatic or manual mode - maximum load up to 3680 W (16 A) - time synchronization via the Internet - the scheduler remains functional even after an internet outage - remote firmware update 2. Smart Temperature-switched Plug TS11 WiFi Therm - Temperature or time switching mode - temperature setting range +5 °C to + 40 °C - scheduler with up to 16 changes per day - timer function (1 min to 23 h 59 min) - automatic or manual mode - maximum load up to 3680 W (16 A) - time synchronization via the Internet - scheduler remains functional even after an internet outage - remote firmware update 3. Smart Temperature-switched Plug with advanced functions TS11 WiFi Therm PROFI - Temperature or time switching mode - Heating/ cooling mode selection - temperature setting range -20 °C to + 99 °C - Hours of operation - scheduler with up to 16 changes per day - timer function (1 min to 23 h 59 min) - automatic or manual mode - maximum load up to 3680 W (16 A) - time synchronization via the Internet - scheduler remains functional even after an internet outage - time backup up to 24 hours - remote firmware update 4. Room WiFi Thermostat for controlling electric heating PT14-P WiFi - automatic or manual mode - OFF mode (permanent shutdown) - summer mode - temperature setting range +3 °C to + 39 °C - early switch-on function - scheduler with up to 6 changes per day - possibility to set hysteresis - key lock - Open window detection function - maximum load up to 3680 W (16 A) - time synchronization via the Internet - scheduler remains functional even after an internet outage There are other WiFi devices in development that will be able to be controlled by this application. Follow our website.

App designed for use with EVOLVEO Strongvision PRO and older devices. -For 4GA no GPS -device not support GPS -Setting can be saved only in TEST mode -Sending notification on Your screen -All pictures directly to cloud -All settings from Your iPhone - no nedd to set in camera menu -Capture photo directly from your iPhone -Support of new Evolveo products -Support LiveView and data administration for PRO devices App has several main functions: 1): After phone number is set you can received photo from Your EVOLVEO Camera 2): After synchronization setting, you can view the camera: signal strength, battery power and memory space of memory card 3): Upload the pictures and videos to APP's cloud 4): Control camera taking and recording 5): Multilingual selection Files stored in the cloud are of reduced size, approximately 100 KB per image and 2 MB per video, compared to the original files saved on the device’s SD card. The cloud storage capacity is 128 MB. Once the storage is full, the oldest files will be overwritten. Files remain in the cloud for 30 days before being permanently deleted. The camera can be shared with an unlimited number of users. Full-size files are always stored on the SD card in the device. They can also be downloaded via the app to the app’s gallery and subsequently saved to the device; however, this increases the amount of mobile data used by the operator.