Mesh++ vs Simple Remote (MONITOUCH)

Use this app to control Mesh++ networks and nodes from anywhere in the world, operate them via Bluetooth, and more. The status page for an individual network will show the online/offline status, current capacity, number of users, and more. On a network's "nodes" tab, you can move nodes between networks and view their status. To create a network: 1. Go to the "Create" tab and click "Network" 2. Fill in the location, SSIDs, channel, etc. and click "Create" 3. Your new network will now be accessible on the "Dashboard" home page! Getting started with a new node: 1. Go to the "BLE Search" tab with the bottom of the device near. 2. Click on node to connect to it. 3. Turn the node on via the slider in the top right. The bottom LEDs should begin to flash. 4. A button to "set up node" will allow you to add it to a network and configure it.

"Simple Remote" lets you control screens of Programmable Operator Interface - MONITOUCH from your iPhone or iPad. User registration is not required at all. Simply install the application on your iPhone or iPad and it's ready for use. === Application Examples === - Adjustment of machines or production lines You can easily monitor screens of MONITOUCH on your iPhone or iPad. There is no need to stand in front of the MONITOUCH unit to check the status of machines or production lines. - Operation in clean room There is no need to gear up and enter the clean room to check screens. Just start up "Simple Remote" on your iPhone or iPad for remote monitoring and control of the MONITOUCH that is located in the clean room. It's useful for a quick checkup. - Troubleshooting In combination with a Wi-Fi router, you can operate the MONITOUCH from a distant location such as a control room as long as both MONITOUCH and your iPhone or iPad are connected to the same network. You can troubleshoot or verify what's happening without going to the site. (e.g. MONITOUCH: wired LAN, iPhone or iPad: wireless LAN) === Key Features === - Pinch to Zoom feature is supported. High visibility is ensured even on the iPhone. - By registering multiple units (IP address), you can easily switch the target MONITOUCH to operate remotely. - Menu can be displayed in 5 languages (English, Japanese, Korean, Simplified Chinese, Traditional Chinese) === Compatible MONITOUCH Models === with wireless LAN *1: V9 series [Advanced] *2 V9101iWRLD, V9100iWRLD, V9071iWRLD, V9070iWRLD V9 series [Standard] *3 V9150iXRD, V9120iSRD, V9120iSRBD, V9100iSRD, V9100iSRBD, V9080iSRD, V9080iSRBD without wireless LAN *4: V9 series other than listed above TS2000 series TS2060i TS1000 Smart series TS1070Si, TS1100Si TS1000 series TS1070i, TS1071i, TS1100i, TS1101i === Remarks === *1 Only iPhone or iPad is required for use, but please note that the communication distance with the V9's wireless LAN is limited. Connection check is suggested before use. If the connection is not strong enough, please install a Wi-Fi router. *2 Complied with Radio Act in Japan, USA, Canada, Europe, Korea. Please use a Wi-Fi router in other countries. *3 Complied with Radio Act in Japan only. Please use a Wi-Fi router in other countries. *4 Installation of Wi-Fi router is required. a link to the source code https://gitlab.com/iiordanov/remote-desktop-clients-ios