Comparison

Table8welds vs Wireman

Price, ratings, monetisation and update history for both apps, side by side β€” with what reviewers say about each.

Head to head
About

Table8welds

Features
Read full description

Useful for the preliminary sizing of fillet welds, Table8welds is an engineering calculator app that computes the initial fillet weld size for typical welding patterns used in steel construction. After providing the input parameters (design method, weld strength, weld pattern, required load and weld dimensions), coefficients C and C1 are determined based on industry standard reference tables. The initial fillet weld size, Dmin, is then calculated and expressed as the minimum number of sixteenths of an inch required. The calculations performed by the Table8welds app are based on the Instantaneous Center of Rotation Method. For practicality, the weld dimension, L, is limited to a minimum value 1 inch and a maximum value of 100 inches. The required force, Pu or Pa, is limited to a range between 1 and +9,999 kips. The tables used by the app to determine the Coefficient, C, for Eccentrically Loaded Weld Groups are available for reference and manual verification by the user.

About

Wireman

Features
Read full description

Size wire, check voltage drop and calculate conduit or box fill with nine free electrical calculators. Wireman brings everyday job-site tools and selected searchable NEC 2023 tables and summaries to your iPhone, even when you are offline. See your inputs, results and calculation steps, with relevant references where applicable. Built for electricians, apprentices and maintenance technicians who want a clear record of their work. NINE FREE CALCULATORS β€’ Wire sizing with temperature, bundling and terminal limits β€’ Circuit sizing: load, breaker, conductor and equipment ground β€’ Voltage drop and wire sizing for a target drop β€’ Conduit fill for THHN conductors in EMT, PVC Schedule 40 and RMC β€’ Conduit bending: offsets, three-bend saddles and stub-ups β€’ Box fill β€’ Single- and three-phase power β€’ Ohm’s law β€’ Unit conversions NEC 2023 REFERENCE β€” INCLUDED FREE Search selected tables and article summaries by number or topic, then open a related calculator. Contextual input help explains important assumptions. This is a practical reference, not the complete NEC text; the supported calculation baseline is NEC 2023. Other editions and local amendments are not modeled. SAVE THE WORK WITH WIREMAN PRO A one-time in-app purchase unlocks: β€’ Named jobs with customer details and notes β€’ Saved calculations with their inputs, results and workings β€’ Reopening, editing and duplicating saved calculations β€’ PDF reports for selected calculations, generated offline β€’ Text sharing and remembered conductor defaults β€’ Six additional calculators: Motor Circuit, Transformer, Fault Current, Dwelling Load, EV Charger and Grounding Transformer estimates full-load current and primary-only fused protection for supported inputs up to 1,000 V. Fault Current uses an infinite-primary estimate; Dwelling Load uses a limited 240 V standard-method model. Check the assumptions shown in each tool. Explore six read-only Pro examples and a sample PDF report before buying. Existing Pro purchasers receive the new Pro features at no additional charge. No subscription. No ads. No account required. Calculators and reference tools work offline; buying or restoring Pro requires internet access. The App Store shows your local price before purchase. YOUR JOB RECORDS STAY ON YOUR DEVICE Jobs do not sync to an account. Export important records before deleting the app or its data. PDF and text exports are reports, not restorable backups. Older saved records remain readable and exportable; records without saved inputs cannot be reopened for editing. Usage analytics is optional and off until you opt in. Calculator inputs and saved job records stay on your device unless you choose to share them. Wireman is a reference tool, not a substitute for professional judgment or the adopted electrical code. Results depend on your inputs and each calculator’s stated scope. Verify against the applicable code and local amendments before performing work.

Screenshots

Table8welds3 screens
Wireman4 screens

Verdict

The call

The clearest difference is in-app purchases: Table8welds at none against Wireman's 1. Wireman's advantage is update cadence (every 2 months vs every 21 months) and iOS requirement (15.0 vs 26.0). On price, ads and device support there is nothing between them.

Scored on Price Β· Rating Β· Positive reviews Β· Number of ratings Β· Update frequency Β· Ads Β· In-app purchases Β· Monetization Β· Best chart rank Β· Devices Β· Requires iOS

CostPrice Β· In-app purchases Β· Ads Β· Monetization

Both are free to download. Wireman sells 1 one-off in-app purchase. Table8welds asks for nothing beyond the download.

UpkeepUpdate frequency

Table8welds ships an update every 21 months, Wireman every 2 months. The most recent releases landed on November 19, 2026 and November 18, 2026 respectively.

Scorecard3 real differences Β· 3 level
Table8welds versus Wireman: the parameters behind the verdict, then further details
ParameterTable8weldsWireman
PriceFreeFree
Update frequencyEvery 21 monthsEvery 2 months β€” better
AdsNoNo
In-app purchasesNo β€” betterYes
DevicesiPhoneiPhone, iPod β€” better
Requires iOS26.015.0 β€” better
Further details β€” not scored
Size5 MB7 MB
Age rating4+4+
DeveloperGlendale Coding Labs, IncCaglar Bozkurt

In-app purchases

None

Table8welds

No in-app purchases

1 purchases

Wireman

One-time1
  • Wireman Pro$9.99

Questions

Is Table8welds free?
Table8welds is free to download, with no in-app purchases.
Is Wireman free?
Wireman is free to download, with in-app purchases available.
Do Table8welds or Wireman have ads?
Neither Table8welds nor Wireman shows ads.
Which is updated more often, Table8welds or Wireman?
Table8welds ships an update every 21 months, and Wireman every 2 months. Most recently, Table8welds was updated on November 19, 2026 and Wireman on November 18, 2026.

Other comparisons