Tape Pro vs LoFiFx
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Tape Pro
This audio effect plugin and app emulates tape machines, adding warmth, distortion, and modulation to your sound. It offers flexible saturation, frequency shaping, and realistic tape noise and delay effects for music production.
- Multi-fx tape emulation
- Flexible saturation module
- Dynamic frequency response modeling
- Realistic tape noise emulation
- Wow and flutter effects
- Analog tape delay emulation
- AUv3 plugin and standalone app
Read full descriptionHide full description
Tape Pro is a multi-fx tape emulation AUv3 plugin and app that introduces warmth, frequency shaping, modulation, noise and delay. Whether you want to accurately replicate a microcassette tape running at 1.2cm/s, or you want to drive a mastering grade tape machine with strange distortion shapes into a high feedback delay engine, Tape Pro is the plugin for the job. Saturation The saturation module is the first part of the signal chain within Tape Pro. It’s very flexible as it isn’t restricted to the traditional sound of tape and can be used to tune into your desired distortion sound. The module has 5 user parameters: Type, Drive, Asymmetry, Hysteresis and Remanence. The types of saturation on offer are: Tape, Digital, Rectify, Half-Rectify, Sine & Smooth. Response The response module within Tape Pro models the dynamic frequency response of tape. This can bring warmth, presence, or even jarring qualities to your audio - this is entirely subjective of course! The module has 3 user parameters: Type, Low Pass & High Loss. Tape Pro includes the following impulse responses: Cassette Type 1, Cassette Type 2, Cassette Type 4, Worn Copi-Delay, New Copi-Delay, Mod Copi-Delay, Master SA812, Master TM15, Microcassette 1.2cm/s, Microcassette 2.4cm/s, Semi-Pro RB77 7.5ips & Semi-Pro RB77 15ips. Tape Pro also includes Minimum Phase (MP) versions of the IRs listed above (not including the copi-delay versions). If you are using Tape Pro in parallel, on a bus or on a send, we recommend that a minimum phase IR is used. (For more information on this please see the explanation in the manual available from our website). Noise The Noise module applies real, sampled tape noises to the signal chain. The module has 4 user parameters: Type, Pre/Post Delay, Gain & Crosstalk. The noises included are the same as listed above in the response module. Wow & Flutter The Wow and Flutter module emulates the natural irregularities in the physical medium of tape. Wow recreates the low speed fluctuations of tape speed, while Flutter recreates the high speed fluctuations. The modules have 10 parameters in total. Wow: Depth, Sync, Rate, Mod, Sync x2 and Mod Rate. Flutter: Depth, Rate, Mod, Mod Rate. Delay The Delay module is an emulation of an analogue tape delay machine. The module has 11 user parameters: Dry, Wet, Time L, Time R, Feedback L, Feedback R, Portamento, Enable, Initial, Sync and Link. Tape Pro is both a stand-alone application as well as an AUv3 plugin, meaning it works within iOS and iPadOS hosts such as GarageBand.
LoFiFx
This audio effect plugin offers a collection of tools designed to add warmth, stereo movement, and unique tonal characteristics to any sound. It features a diode-based clipper, independent stereo pitch modulation, randomized panning, vintage reverb, and versatile filtering options.
- Diode-based clipper for crunchy tones
- Independent stereo pitch modulation (Wobble)
- Randomized stereo panning (Sway)
- Vintage-flavored reverb with adjustable size and decay
- Low-pass and high-pass filters
- LFO for modulation effects
- Output stage clipper for limiting
Read full descriptionHide full description
Lo-Fi Multi-Effects Plugin (AUv3) LoFiFx is an audio effect plugin that can run standalone, or in any AU compatible host application such as Logic or GarageBand. Overview LoFiFx is a collection of effects often used in the production of lo-fi music, although you might find it useful on just about any sound source. LoFiFx works particularly well on sounds that you may feel are a little dry or lifeless, by adding warmth, increased stereo spread and movement, and at times, unpredictable tonal changes. Parameters Active - Toggles the effect On or Off. Crunch - sends a variable amount of gain into a virtual diode-based clipper. Diodes are often used in simple guitar overdrive pedal circuits, and when pushed, produce an unrefined crunchy tone - hence the name. Wobble - applies a randomised rate and depth pitch modulation effect that can sound similar to a faulty tape recorder at higher settings. The LoFiFx wobble effect is different from most tape emulations as the left and right channels wobble independently. Sway - varies the amount of randomised panning. Similar to the Wobble effect, this does not occur at a set rate or depth, so it can be used to add a sense or unpredictable movement in the stereo field. Reverb - adds a bit of vintage-flavoured reverb to the mix. As the parameter is increased past half-way, the size and decay of the reverb also increase. A low-cut filter is also applied to the signal sent to the reverb which helps retain clarity on drum and bass sounds. LPF - sets the frequency of a lowpass / high-cut filter. HPF - sets the frequency of a highpass / low-cut filter. Note that the LPF and HPF frequencies overlap, so at some settings, you might find the overall output is being reduced significantly as the filters are in series. If you want to prevent this, make sure the LPF frequency is higher than the HPF / the HPF frequency is lower than the LPF. Basically what gets through the two filters depends on the size of the gap between the two frequency values so they can be combined to create a simple bandpass filter. LFO - sets the destination of a triangle waveform LFO. In addition to classic LPF / HPF sweeps, assigning the LFO to the Crunch parameter can create an interesting tremolo effect. Rate - sets the rate of the LFO. Depth - sets the depth of the LFO. Drift - introduces a variable amount of rate and depth modulation. Adding drift is a handy way of making the LFO cycle less obvious and predictable. LoFiFx has a built-in clipper at the output stage so can be used as a utility effect to brick-wall limit any incoming signal to 0dB. This isn't going to replace your favourite mastering plugin anytime soon and it gets very crunchy when pushed. If the name sounds familiar, LoFiFx is an original design based on the LOFIFX module developed for Voltage Modular by Waverley Instruments. For more info and support please visit: www.waverley-instruments.com/robjackson
Screenshots
Verdict
The clearest difference is update cadence: LoFiFx at daily against Tape Pro's monthly. LoFiFx also leads on price ($1.99 vs $7.99) and rating (5.0 vs 4.7). Tape Pro's advantage is ratings volume (15 vs 4). On ads, in-app purchases, monetization model and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Tape Pro costs $7.99 and LoFiFx $1.99 up front. Neither carries in-app purchases, so what you see is what you pay.
LoFiFx holds the better App Store score, 5.0 against 4.7. Both are backed by a comparable volume of ratings — 15 and 4 respectively.
Tape Pro ships an update monthly, LoFiFx daily. The most recent releases landed on November 16, 2026 and November 4, 2026 respectively.
| Parameter | Tape Pro | LoFiFx |
|---|---|---|
| Price | $7.99 | $1.99 — better |
| Rating | 4.7 (15 ratings) | 5.0 (4 ratings) — better |
| Positive reviews | 80.0% of reviews | — |
| Number of ratings | 15 — better | 4 |
| Update frequency | Monthly | Daily — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Paid |
| Devices | iPhone, iPad, iPod | iPhone, iPad, iPod, Mac — better |
| Requires iOS | 11.0 — better | 12.0 |
| Further details — not scored | ||
| Size | 123 MB | 12 MB |
| Age rating | 4+ | 4+ |
| Developer | Caelum Audio Ltd | Rob Jackson |
Customer experience
Tape Pro
LoFiFx
In-app purchases
Tape Pro
No in-app purchases
LoFiFx
No in-app purchases








