Trimix Tools vs Diveplanner Tec & Rec

Trimix blending and planning tools that can be used where you are and when you need them. You can use these tools to plan your mixes prior to arriving at the dive shop or to fill your cylinder at the air station or on the boat. Calculations are provided for the best Trimix given a planned depth and a desired maximum partial pressure of oxygen and equivalent narcotic depth (END). You can also calculate the ceiling and maximum depths along with your END based on your planned mix. The dive planning tools support both salt water and fresh water calculations. The blending tools provide for filling a cylinder with a remaining mix (or empty) to a specified target mix using oxygen, helium and a topping mix (air or another available mix). You can also calculate the result of topping an existing partially filled cylinder with a specific topping mix (air or another available mix). There is also a Bleed Down calculator that allows you adjust an existing full or partially full cylinder to a new mix with minimal wasted gas. Trimix Tools supports calculations in both metric and Imperial/US systems of measure. Traveling on a boat or working out of network range? These tools are at hand any time you have your iPhone, iPad or iPod touch. You could, for example, easily calculate the result of topping your cylinder from your first dive with air from the boat's compressor to take advantage of any remaining mix. You also have the convenience of saved settings that you can recall at a touch and adjust to a new situation as needed. Chances are you regularly work with a specific set of mixes and common dive situations. Trimix Tools includes the convenience of saved settings that you can recall and adjust to a new situation as needed. You can also select mix values using pre-installed default mixes or your own saved custom mixes. When updating one of the mixes for a tool you are offered a list of saved mixes that you can use directly or adjust as needed. You can save the currently displayed mix by tapping on the "+" button. Just like with the saved calculations, you can re-arrange or delete any mixes in your saved list. Do you need to share your planning or blending calculations with other divers? All the tools have the ability to share the results of the calculations from within the application. You can set default email addresses and a subject Trimix Tool's settings that will be automatically added when you share a result. All END calculations (Dive Planning and Best Trimix tabs) in Trimix Tools treat oxygen as a narcotic gas by default. There is an option available under the Settings tab to change the default so that oxygen is not treated as narcotic if that is your preference. Remember you must always personally analyze your mix before diving it. This application is not a substitute for proper training and should not be used as a substitute for proper dive planning or the primary Trimix blending and planning methods taught during training. Please do not attempt to handle high pressure oxygen or fill SCUBA cylinders without proper training.

Diveplanner Tec & Rec plans recreational and technical dives, on open circuit or closed circuit rebreather (CCR), in a few taps, and keeps your logbook. PLAN • Bühlmann ZH-L16C decompression model with your gradient factors • Open circuit and CCR, down to 300 m / 985 ft, in salt, fresh or EN 13319 water, at sea level or at altitude • Multi-level dives, multi-gas decompression with automatic or chosen switch depths • Contingency plans computed for you: deeper, longer, lost deco gas, GF 100 and the CCR bailout • Warnings for ppO2, END, gas density, isobaric counter diffusion, CNS and OTU • The decompression chart of each plan: the profile, the tissues' ceilings at GF 100 and at your gradient factors, the leading tissue • A dive day of as many repetitive dives as you need, with their surface intervals • Saved plans in folders, shared as files GAS • Describe your cylinders: the plan gives the pressure at the end of the dive, the turn pressure, the rock bottom and the maximum bottom time your gas allows • Gas needed by volume and weight, per gas TABLES • Dive tables by depth and bottom time for your own gases, gradient factors and conditions, with the previous dives of the day • Share or print the table as a PDF TOOLS • Gas blender: partial pressure blending of nitrox, trimix and heliox from what is left in the cylinder, ideal or real gas; the best mix for a depth from your ppO2, END and gas density limits, and the cylinder label • Tides: the tide of a day anywhere at sea, from the nearest NOAA tide station or the EOT20 global tide model, its high and low waters, and the tidal currents and slack waters of a nearby current station, read to the minute on the chart LOGBOOK • Log your dives by hand, from a plan, or download them over Bluetooth from a Shearwater dive computer (Petrel 2, Perdix, Perdix AI, Nerd 2, Teric, Peregrine), with the profile, stops, gases and sensor values • Photos, dive sites on a map, statistics, tags, search and filters • Synchronised between your iPhone, iPad and Mac with iCloud • Export to UDDF, Subsurface, CSV, a PDF logbook and .divelog archives; import UDDF and Subsurface SHARE • Ready-to-cut dive schedules as a PDF, for your buddy or your slate: every plan, the gas and cylinders, CNS, OTU and warnings EVERYWHERE • iPhone, iPad and Mac • Metric or imperial units • In 12 languages, each with its user guide LICENCES • Rec, free: one gas, air or nitrox up to 40 %, down to 66 m / 210 ft • Tec Basic: up to 3 gases, nitrox up to 100 %, normoxic trimix and triox • Tec Advanced: unlimited gases and depth, hypoxic trimix • Try every feature free for 2 weeks Diveplanner is a planning aid. It does not replace training, experience, a dive computer or your own judgement: always dive within the limits of your certification.