Spin vs xWind

Featured in Flying Magazine July 2012 "8 Great Aviation Apps"! Reviewed favorably on AOPA Flight Planning App Roulette 20 Nov 2012 Designed by an airline pilot, Spin-a-Wind calculates wind components, temperatures, altitudes and airspeeds. The headwind (tailwind) and crosswind components are based on the runway, and reported wind direction and speed. If the airport has parallel runways, using the runway number closest to the actual magnetic heading of the runway gives the most accurate results. The result is also displayed graphically. Crosswind and tailwind components are rounded up, while the headwind component is rounded down, making sure that all results depict the worst case. To instantly change to the opposite (reciprocal) runway, tap the runway number at the far end. Spinning reels are used to make your selections. No keyboard is necessary. Results of calculations are displayed instantly when the last reel stops. The app was designed for one handed use, and ease of operation. The second item on the tab bar links you to a page with temperature conversions. Enter the temperature in degrees Celsius, and instantly the Fahrenheit conversion is displayed, as well as the chill factor in °C and °F using the NWS Wind Chill index used by the U.S. and Canada. (note: the NWS Wind Chill index is not valid for greater than 50°F or less than 3 mph of wind. Relative Humidity and Heat Stress Index are calculated using the entered Dewpoint Temperature. The third item deals with altitudes, metric, pressure altitude and density altitude. Density altitude is diaplayed for assumed dry air, and also moist air (based upon the temp/dewpoint spread entered in the temperature page. The fourth item is the Airspeed Calculator. It uses equations for TAS, mach, and speed of sound. The equations used will be accurate even for the higher speeds of jet aircraft. The fifth item on the tab bar moves the view to the settings page. Here, you can set your display speed units (kts, mph, kph) and pressure units(inHg, hPa, mb) as well as the threshold points where the wind results turn amber (caution zone) and red (aircraft limits).

xWind is an easy to use tool to assist pilots in evaluating wind conditions with respect to head, cross and tailwind limitations. Once setup, the xWind app provides all information in one single screen, requiring minimal user interaction during high workload phases of flight, displaying: - Current wind direction and speed - Runway course - Cross and head or tailwind components - Currently applied wind limits - 'Forbidden' wind angles based on the current wind speed - Maximum wind speed table based on current wind limits ​ Reference wind, runway course, as well as wind limits, can all be adjusted on the main screen by either dragging the wind arrow, course rose or wind limit lines. A settings button at the bottom presents a popup screen where both the units for wind speed (Kts or Mps) and the default values for wind limits can be specified. In addition to the general setting for wind speed units, the user can select the alternative units for only the current wind, wind components and maximum winds table by double tapping the wind display at the top of the main screen. When operating from a Kts country into Mps territory, this option allows to set the current wind and see the maximum allowed winds in Mps, based on limits that are still set in Kts. Or vice versa.... xWinds supports iOS darkmode.