BuildCalc vs Foundation Squaring Calculator
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
BuildCalc
This app enhances traditional construction calculators with advanced functions for layout, material estimation, and complex calculations. It offers interactive features, customizable material sizes, and streamlined results presentation to reduce complexity and improve accuracy for professionals.
- Advanced baluster and stair layout
- Fence post and material estimation
- Interactive calculation adjustments
- Customizable material sizes
- Miter saw vs. protractor rafter calculations
- Streamlined results display and saving
Read full descriptionHide full description
What if you could take the best construction calculator and fix it. That’s right ... you love it, it has served you well, and you stand by it ... but could it do more? Could it be easier to use? After testing by pros from around the world, BuildCalc is ready to give you more - more function and more answers with less complexity, less hassle, and less confusion. MORE FUNCTIONALITY: • Advanced Baluster Function: Complete layout of railing and staircase balusters with less guess work - and with all the flexibility you need for every custom job. • Advanced Stair function: Stair layouts for professional results - including dimensioned drawings of your Stringer, Stringer Installation, and Finished Staircase. And you can email a PDF of these drawings right from BuildCalc so you can print them or share them. • Fence Function: Give BuildCalc a fence row length and it will tell you how many posts, rails, pickets, and or panels you need. • Interactive Functions: The Stair, Baluster, Compound Miter, and Rafter functions are now fully interactive. Want to change input values? Change the Run? Switch between Regular and Irregular Hip Roof analysis? You can do this and your results will be updated automatically - without you needing to remember what key to press. MORE ANSWERS: • You are no longer tied down to: only one brick, block or tile size for the masonry function; a fixed number of drywall sheet sizes; only one footer cross sectional area; or one size of shingles and sheathing. If you don’t see the size you want, you can add as many as you need. And for area input, you can store your custom sizes in Length x Width format, so you won’t have to do mental gymnastics to figure out what was the dimensions for that last size you stored. • Want to cut your hip roof rafter using a miter saw ... or a circular saw using a hand-held protractor? With a tap of a button, BuildCalc will automatically switch between Miter Saw and Protractor results. BuildCalc can do this for Compound Miters, too. • Sheathing Angles, Purlin Angles, Gable Area, Backing Angles, Plan Angles, Rough vs. Finished Stair Layout Dimensions, Stringer Throat, Stringer installation dimensions ... and a lot more not found on other construction calculators. LESS COMPLEXITY AND LESS HASSLE: • Tired of having to press and press and press buttons to get the results of a calculation? BuildCalc puts an end to this. For all advanced functions, you get ALL of your results in list form with just one or two key taps. • And, rather than having to write down those results, all advanced functions allow you to save your results - as many times as you want with a label you choose - so you can recall the complete results at your convenience. Now you can do a calculation today and two days, two weeks or two years later, it is there for you. • Less “quirks”. Have you been annoyed by arcane key stroke sequences on other construction calculators? We are too. BuildCalc 2.1 streamlined the keystrokes to do a better job of giving you less “errors” and more results. Don’t remember what you have to enter before a Hip Rafter or Stair calculation? Well, now you don’t have to. BuildCalc will provide you with a check list of inputs and on-the-spot help to get it right. • Drywall and Masonry “Room Mode”: If you have stored a Length, Width and Height for a room, BuildCalc will give you the Drywall or Masonry required for the walls and the ceiling / floor - with only a tap of the Drywall or Masonry button. No more pondering over complex key sequences ... it just works. NOW WITH ADVANCED STAIRS, BALUSTER, AND HIP/VALLEY FUNCTIONS Get more results than you ever could before - including dimensioned Stringer, Stringer Installation and Finished Staircase Drawings. Drawings can then be emailed to others or printed at your convenience. Email us and we'll send you an example!
Foundation Squaring Calculator
Read full descriptionHide full description
Get the corners right before you pour. Enter your length and width and the app gives you the diagonal a square layout has to measure — in feet and inches to the nearest 1/16", or in meters. Pull both corner-to-corner measurements, type them in, and it tells you whether you're square and exactly how far to move a corner if you aren't. WHAT IT DOES • REQUIRED DIAGONAL — the measurement both corner-to-corner pulls must match. Shown as a tape reading (14' 1 11/16") and as a decimal, plus perimeter for your string line and enclosed area. • OFF-SQUARE FIX — enter the two diagonals you actually measured and get a straight answer: which diagonal is long, and how far to draw a corner in to bring the layout square. Move one corner the full amount, or split it between both ends. No guessing, no trial and error. • L-SHAPED FOOTPRINTS — describe the overall size and the cut-out corner. The app splits the footprint into two rectangles and gives you a diagonal for each, plus a confirmation shot to the inside corner so you know the notch landed right. Rotate the drawing to match what's staked on the ground. • YOUR TOLERANCE — decide what counts as square: 1/16", 1/8", 1/4", 1/2", or 1–12 mm. Tight formwork and a garage pad don't need the same standard. BUILT FOR THE JOB SITE • Feet-and-inches entry with real fractions — type 1 11/16, or 11/16, or 1.5 • Round results to 1/8", 1/16", or 1/32" to match the tape in your pocket • Full metric mode • Scale drawings that show which way the layout leans and which diagonal to pull • Large, high-contrast numbers; light and dark themes • Your measurements are still there when you come back to the phone • Works with no signal — every calculation runs on the phone, so a basement or a rural lot is fine • In English and Spanish WHO IT'S FOR Concrete and foundation crews, framers, deck and shed builders, fence and post-hole layout, landscapers setting patios and pads, and anyone who has ever pulled a diagonal twice and gotten two different numbers. THE MATH A rectangle is square when both diagonals equal the square root of length squared plus width squared — the 3-4-5 rule, generalized to any size. When the diagonals disagree, the layout has racked into a parallelogram, and the exact correction is the long diagonal minus that target. For small errors this comes out to the familiar "half the difference" rule of thumb, but it stays correct when a layout is badly out. Layout guidance only. Always confirm critical dimensions against the stamped drawings and your local code before you pour. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Screenshots
Verdict
The clearest difference is price: Foundation Squaring Calculator at $4.99 against BuildCalc's $24.99. Foundation Squaring Calculator also leads on update cadence (weekly vs every 3 weeks) and iOS requirement (15.1 vs 17.0). On ads, in-app purchases and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
BuildCalc costs $24.99 and Foundation Squaring Calculator $4.99 up front. Neither carries in-app purchases, so what you see is what you pay.
BuildCalc ships an update every 3 weeks, Foundation Squaring Calculator weekly. The most recent releases landed on November 16, 2026 and November 13, 2026 respectively.
| Parameter | BuildCalc | Foundation Squaring Calculator |
|---|---|---|
| Price | $24.99 | $4.99 — better |
| Rating | 4.6 (74 ratings) — better | — |
| Positive reviews | 87.4% of reviews | — |
| Number of ratings | 74 — better | — |
| Update frequency | Every 3 weeks | Weekly — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | — |
| Devices | iPhone, iPad | iPhone, iPad, iPod — better |
| Requires iOS | 17.0 | 15.1 — better |
| Further details — not scored | ||
| Size | 15 MB | 37 MB |
| Age rating | 4+ | 4+ |
| Developer | 42nd Parallel | Alexander Riggs |
In-app purchases
BuildCalc
No in-app purchases
Foundation Squaring Calculator
No in-app purchases
Questions
Is BuildCalc free?
Is Foundation Squaring Calculator free?
Do BuildCalc or Foundation Squaring Calculator have ads?
Which is updated more often, BuildCalc or Foundation Squaring Calculator?
Other comparisons















