Construction Master Pro Calc vs SKF Machine train alignment

FREE Try Before You Buy 14 Day Trial; your App Store account is not charged by Apple during the free trial. Rated 4.8 stars with over 1.12M downloads. The trusted construction calculator used by professionals across the US and the world. The go-to feet-inch-fraction calculator for framers, contractors, and builders. Includes Construction Master Pro and Construction Master Pro Trig in one app, with the CMPro Training Guide built in. Built with the same core engine that powers the industry-standard advanced construction-math calculators from Calculated Industries. Award-winning tools trusted by the industry for 40 years. BUILT FOR THE JOBSITE • Framers and carpenters: rafter cuts, stair layouts, lumber quantities, and framing calculations on the job • Builders and general contractors: estimates, material takeoffs, and building layouts • Concrete and masonry: footing volume, block counts, and unit conversions • Roofing contractors: bundles, squares, pitch, and slope in seconds WHY PROFESSIONALS CHOOSE CONSTRUCTION MASTER® PRO • Powerful built-in calculations make CMPro ideal for completing layouts, plans, bids, and estimates • Work in and convert between all common building dimensional formats US & Metric • Built-in right angle functions simplify square-ups, rafters, slopes, and more • Handles framing, roofing, concrete, lumber, and stair calculations in one app • Full trigonometric functions for advanced construction math BUILT-IN SOLUTIONS • Dimensional Math and Conversions • Feet-Inch-Fraction, Inch Fraction, Yards • Decimal Feet and Inches (10ths, 100ths) • Preset Fractions (1/2" through 1/64") • D:M:S, Decimal Degree Entry and Conversions • Full Metric Function (m, cm, mm) RIGHT ANGLE SOLUTIONS • Complete Right Angle/Rafter Calculations • Pitch Key (Slope and Grade) • Rise, Run, Diagonal/Common Rafter Keys • Regular and Irregular Hip/Valley & Jack Rafter Keys • Rafter Cutting Angles (Plumb, Cheek, and Level Cuts) • Stair Layouts (including – Riser Limit, Stairwell Opening, Headroom, Floor Thickness) • Rake-Wall (including Arched) AREA AND VOLUME SOLUTIONS • Square and Cubic • Roof – Bundles, Squares, 4x8 Sheets, Pitch, Plan Area • Drywall, Siding and Paneling 4x8, 4x9 and 4x12 • Column/Cone Area and Volume -- • Basic & Advanced Circular Calculations • Weight per Volume Conversions • Length, Width, and Height Keys • Blocks, Footings SPECIAL FUNCTIONS • Trigonometric Function Keys: Sine, Cosine, Tangent, Arcsine, Arccosine, Arctangent • Board Feet • Studs: Find number On-center • User-Definable Preferences • Cost per Unit (total costs based on unit price) • Equal-Sided Polygon • Compound Miters • Crown Angle • Advanced Paperless Tape APP-ENHANCED FEATURES • Ask CMPro – exact steps for any calculation. AI built on CMPro’s 40 years of proven math • CMPro Toolbelt -- quick access to every tool, customizable for your workflow • Fast Fractions Mode -- dedicated fraction keys for faster, more precise entry • Materials Mode -- streamlined estimating for drywall, roofing, lumber, and more • Project Notes -- create text or voice-to-text notes, set up folders by project or client, add attachments, and share with your crew • EZ Calcs – 100+ forms-based calculators with illustrations for framing, concrete, roofing quantities, and much more. • Searchable Help and how-to videos • Context-sensitive Help -- press and hold any function key for Help text, diagrams, and videos • Save and share calculations and outputs (e.g., cut lists) with others on your crew • Bosch GLM integration -- send measured values into live calculations or Notes SUBSCRIPTION INFORMATION Subscription automatically renews unless canceled at least 24 hours before the end of the current period. Manage or cancel in Apple account Settings > Account (Apple ID) > Subscriptions. TRADEMARKS Construction Master® and Calculated Industries® are registered trademarks of Calculated Industries, Inc. Copyright 2026

The Machine train shaft alignment app is designed to be used with the SKF Shaft Alignment Tool TKSA 71. Together, the TKSA 71 and the app form an alignment system that allows the alignment of machine trains with multiple connected machines in an intuitive and easy way. The system uses line laser to PSD technology that enables highly accurate and reliable shaft alignments. The TKSA 71 and this app communicate wirelessly via Bluetooth®. Without the hardware the app can nonetheless be used, as it features a fully functional demonstration allowing the complete alignment process of a machine train to be experienced before purchasing the TKSA 71. KEY FEATURES: • Very easy-to-use – The Machine train shaft alignment app focuses on making the alignment tasks of several couplings as easy as possible and enabling accurate machine train shaft alignments.  • Quick Three Point Alignment Measurements - Follow the guidance of the app and perform a full 9-12-3 measurement or perform a limited rotation measurement with as little as 40 degrees of total rotation. • Selectable stationary feet – The alignment process records the complete alignment situation and allows the operator to select two pairs of stationary feet. The app then calculates the required machine movement for all feet while keeping the stationary feet pairs at the same location. The operator can easily find the best alignment strategy by selecting different pairs of stationary feet and checking the required movement for the alignment correction. • The machine train app is designed for machine trains of three machines, covering common machine trains like motor – gearbox – application combinations. • Demonstration mode – The Machine train shaft alignment app offers a fully functional demonstration mode allowing the complete alignment process to be experienced before purchasing the TKSA 71. • Automatic alignment report – Automatically generated alignment reports give a complete overview of the alignment process and results. The reports can be customized with additional notes, a machine picture and a signature. The report can easily be shared via email or cloud services. • Easy to follow explanatory videos – Short explanatory videos are available in the help section of the app and show in easy steps how to set up and perform accurate alignment measurements. • 3D Animations – 3D animations intuitively guide the user through the alignment process, allowing accurate shaft alignment to be performed in a very easy way. • Machine library and QR code scanner – Helps keeping track of the machines that have been measured. Machine information like distances, the machine picture, and other details are saved for each machine and can be reused the next time the same machine is measured. QR codes can be scanned to identify a machine and quickly retrieve its details. The library can also be used for easy access to all the reports generated for each machine in one place. HARDWARE – SKF Shaft Alignment Tool TKSA 71:
 The SKF TKSA 71 system uses a pair of measurement units that are combined with laser transmitter and detectors to measure and correct shaft alignment with high accuracy and reliability. The data is transferred in real time through Bluetooth® 4.0 LE to the app.
 IMPORTANT NOTE: This app is designed to be used with the SKF Shaft Alignment Tool TKSA 71 hardware. The SKF TKSA 71 can be purchased separately from your local SKF Authorized Distributor. For more information and technical specifications about the SKF Shaft Alignment Tool, please visit our website.