Comparison

Pipe Fitter Calculator vs Pipe Fitting

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Pipe Fitter Calculator

This app provides a comprehensive suite of tools for pipe fitting calculations, including offsets, angles, and fitting data. It supports various pipe standards and measurement units, helping users determine precise cut lengths and angles for fabrication.

Highlights
  • Multiple pipe offset calculation options
  • Reducing tee offset calculations
  • Odd angle fitting calculations
  • Support for Imperial, Metric, and DIN standards
  • Flexible input for feet, inches, cm, mm, and decimals
  • Calculates pipe cut lengths for spool pieces
  • Flange alignment and bolt hole rotation
Features
Currently charting
Read full description

The Pipe Calculator is evolving to provide more and more information at your finger tips. Quick Facts: - Pipe Offset - 8 options in 1 - Rolling Offset - 9 options in 1 - Reducing Tee Offset - 8 Options in 1 - Back 2 Back Odd Angle Fitting Calculation - 90 to Odd Angle Fitting Calculation - Offset Calculation for Fixed Dimensions - Squaring Odd angle offsets - Squaring Odd angle 90 offsets Tech Data for: All Fitting Sizes Imperial, Metric, DIN 2-Hole Flange Alignment Back 2 Back Fitting Data The Core of this powerful app: - ANSI/ASME Pipe standards for use in Imperial/Metric systems - DIN Pipe standards for those under the Deutsches Institut für Normung or German Institute for Standardization - Input values as Feet, Inches, Fractions, decimal or any combination of. - Input as Cm and MM and decimal or any combination of - Calculate "long radius", "short radius" and "3 Radius" fittings - Use the XR to enter custom value for a Custom Pipe Radius. - Manual input that will work with any pipe standard in the world. - Determines Cut Length of Pipe to build spool piece - Generates Values to cut any angle fitting out of a 90 - Rolling Offsets - Equal Spread offsets up to 4 lines, different pipe sizes for each line, different fitting radius allowed, and detects layout errors for lines with insulation. - Advanced rolling offset vertical outlet - Advanced rolling offset exiting pipe left - Calculates bolt hole rotation for 2-holing flanges in the bench - Pipe Guide Book - Finding angles and sides - Pipe charts for Imperial/ Metric fittings under ASME/ANSI standards Find the App on Facebook http://www.facebook.com/PipeCalculatorApp Your feedback is always welcome on this app, as we are always improving its functionality. if for any reason your device has an issue on install or functionality please let us know. We will fix it. We want everyone to be able to utilize this tool at work to improve their productivity and value as a pipefitter/Fabricator. http://www.pipefittercalculator.com/lmf/contact Contact us either by: Phone: 207-200-1556 Text: 207-200-1556 email:easypipefitter@gmail.com Web: www.pipefittercalculator.com (our webpage has a comment form. Enter your info and comments there as well as request to receive updates on existing and new products to improve your workflow) Please note we make no claim or responsibility in the values generated and the user takes sole responsibility when using this application. Thank you. *** Please note this is a calculator with accurate functions similar to a standard calculator. The data generated is 100% based upon the data you put in. any issues please use the in app feedback screen and contact me and I will assist you.***

About

Pipe Fitting

This app calculates various pipe fitting measurements, including offsets, rolling offsets, and elbow cuts. It allows users to input dimensions and angles to determine travel, take-out, and cut lengths, with options for welder's gaps and different elbow types. It also includes a triangle solver and supports multiple units of measurement.

Highlights
  • Offset and rolling offset calculations
  • Elbow cut and miter cut functions
  • Take-out calculations for various elbow types
  • Triangle solver
  • Unit conversion (feet/inches/meters)
  • Hands-free Siri integration
  • Results update in real-time
Features
Read full description

Pipe Fitting is a pipe fitting calculator for offsets, rolling offsets and elbow cuts. Enter the offset and the fitting angle, and it gives you the travel, the take-out of each elbow and the length to cut, with the welder's gap already allowed for. Example: a 12" offset with two 2" long-radius 45° elbows and a 1/16" gap. The travel is 16.97", each elbow takes out 1.24", and you cut the pipe at 14.36". • Basic offset: any two of run, offset and angle give the travel and the cut length, with or without gaps. • Rolling offset calculator: offset, roll and run (or the angle) give the travel and the cut length. • Parallel offsets: the cutback for pipes running side by side. • Back-to-back elbows: X° + Y° and 90° + X° fittings from a center-to-center distance, with the angle to cut. • Elbow miter cut: cut any angle from a standard 90 and mark it, with the outside (heel), inside (throat) and centerline arcs and the chords. • Take-outs for short-radius, long-radius and 3R elbows, from 1/8" to 48" NPS and DN6 to DN1200. • Triangle solver: any three sides or angles give the rest, plus perimeter and area. • Feet, inches and fractions down to 1/16", or meters, centimeters and millimeters: pick the unit on the keypad. • Results update as you type, and each calculator keeps your last numbers. • Siri: say "Rolling offset with Pipe Fitting" to open it hands-free. • On iPhone and iPad. HOW TO CALCULATE A ROLLING OFFSET True offset = √(offset² + roll²), and travel = √(offset² + roll² + run²). With 45° fittings the run equals the true offset, so the travel is the true offset × 1.414, the 45° offset multiplier. For a 12" offset with an 8" roll: true offset 14.42", travel 20.40". Take off two 1.24" elbows and two 1/16" gaps, and the cut is 17.79". Pipe Fitting does every step for you. Built for pipefitters, steamfitters, pipe welders, plumbers and apprentices, in the shop or on the job site. All seven calculators are free to use with ads; Premium removes them. Made by xNeat, the team behind Calculator+ and Conduit Bending. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Screenshots

Pipe Fitter Calculator4 screens
Pipe Fitting4 screens

Verdict

The call

The clearest difference is price: Pipe Fitting at Free against Pipe Fitter Calculator's $4.99. Pipe Fitting also leads on rating (4.7 vs 3.6) and update cadence (every 2 weeks vs every 6 weeks). Pipe Fitter Calculator's advantage is in-app purchases (none vs 3) and ads (none vs shown). On review sentiment and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Pipe Fitting is free to download; Pipe Fitter Calculator costs $4.99 up front. Pipe Fitting sells 2 in-app purchases, starting at $4.99 per month. Pipe Fitter Calculator asks for nothing beyond the download.

ReceptionRating · Positive reviews · Number of ratings

Pipe Fitting holds the better App Store score, 4.7 against 3.6. Both are backed by a comparable volume of ratings — 36 and 138 respectively. Written reviews complicate that: 37% of Pipe Fitter Calculator's written reviews are positive against 33% of Pipe Fitting's, so the app with the better star average is not the one people write more warmly about.

UpkeepUpdate frequency

Pipe Fitter Calculator ships an update every 6 weeks, Pipe Fitting every 2 weeks. Both last shipped on November 18, 2026.

Scorecard9 real differences · 2 level
Pipe Fitter Calculator versus Pipe Fitting: the parameters behind the verdict, then further details
ParameterPipe Fitter CalculatorPipe Fitting
Price$4.99Free — better
Rating3.6 (36 ratings)4.7 (138 ratings) — better
Positive reviews37.2% of reviews — better33.3% of reviews
Number of ratings36138 — better
Update frequencyEvery 6 weeksEvery 2 weeks — better
AdsNo — betterYes
In-app purchasesNo — betterYes
MonetizationFree — betterFree with in-app purchases
Best chart rank#38 — better—
DevicesiPhone, iPodiPhone, iPad
Requires iOS9.0 — better16.4
Further details — not scored
Size26 MB52 MB
Age rating4+4+
DeveloperLMF.ServicesxNeat.com

Customer experience

Pipe Fitter Calculator

All ratings32 ratings
Positive59.4%
Neutral9.4%
Negative31.3%
Written reviews43 reviews
Positive37.2%
Neutral7.0%
Negative55.8%

Pipe Fitting

All ratings138 ratings
Positive90.6%
Neutral4.3%
Negative5.1%
Written reviews3 reviews
Positive33.3%
Neutral0.0%
Negative66.7%

In-app purchases

None

Pipe Fitter Calculator

No in-app purchases

2 purchases

Pipe Fitting

Subscriptions2
  • Pipe Fitting3 Days trial2 variants$4.991 Month
  • Pipe Fitting7 Days trial$39.991 Year

Questions

Is Pipe Fitter Calculator free?
Pipe Fitter Calculator costs $4.99, with no in-app purchases.
Is Pipe Fitting free?
Pipe Fitting is free to download, with in-app purchases available.
Which has better reviews, Pipe Fitter Calculator or Pipe Fitting?
Pipe Fitting is rated higher. Pipe Fitter Calculator averages 3.6 out of 5 from 36 ratings, while Pipe Fitting averages 4.7 from 138 ratings.
Do Pipe Fitter Calculator or Pipe Fitting have ads?
Pipe Fitting shows ads; Pipe Fitter Calculator does not.
Which is updated more often, Pipe Fitter Calculator or Pipe Fitting?
Pipe Fitter Calculator ships an update every 6 weeks, and Pipe Fitting every 2 weeks. Most recently, Pipe Fitter Calculator was updated on November 18, 2026 and Pipe Fitting on November 18, 2026.

Other comparisons