Remote Shutter vs Snap Remote

Turn any two devices into a wireless remote camera system — no internet, no router, no account needed. Just connect and shoot. Remote Shutter uses peer-to-peer technology to link two devices directly. One becomes the camera, the other becomes your remote control with a live monitor. Perfect for group photos, selfies, tripod shots, creative angles, and hands-free photography. NEW — MULTICAM: UP TO FOUR CAMERAS, ONE DIRECTOR - Connect up to four iPhones as cameras and see every angle live in a grid - One synced shutter fires photos or video on every camera at the same instant - Footage collects automatically to the director, time-aligned for editing - Set frame rate, resolution, aspect ratio, HDR and focus for every camera from the director - Interviews, music, sports, dance, unboxings — shoot every angle at once FULL MAC SUPPORT - Use your Mac as the camera: built-in, USB and pro webcams, even your iPhone via Continuity Camera - Switch between every camera connected to your Mac, live from your iPhone - Or flip it: use your Mac's big screen as a director's monitor for your iPhone camera FEATURES - Control your camera from your Apple Watch — trigger the shutter from your wrist - Selfies and group shots on the sharp rear camera — frame yourself from the remote's live preview - Wireless remote shutter from up to 50 feet away - Live camera preview on your remote device - Switch cameras remotely — front/back on iPhone, any connected camera on Mac - Camera flash control - Adjustable photo timer - Record video remotely — choose 24/30/60 fps, 1080p or 4K, aspect ratio and HDR from the remote - Tap to focus on the remote's live preview (Pro) - Works with iPhone, iPad, and Mac - No internet or Wi-Fi network required — direct device-to-device connection (just keep Wi-Fi and Bluetooth turned on) HOW TO USE 1. Open Remote Shutter on two devices 2. Devices connect automatically via peer-to-peer 3. Choose which device is the camera and which is the remote 4. Start shooting from anywhere in the room! Whether you're directing four iPhones on a music video, shooting products with a pro camera on your Mac, directing from the big screen, or setting up a family photo, Remote Shutter gives you full wireless control of your camera from another device.

Snap Remote turns your iPhone into a wireless remote for cameras that speak the classic Camera Remote API over Wi-Fi. Live view, shutter release, video recording, every setting the camera actually allows, and an interval mode built for the real timing of a camera. No cable, no account, no cloud. SEE WHAT THE CAMERA SEES The live image comes straight from the camera, including the focus and face frames it reports. Fire from the screen or with the volume buttons, which is what you want when the phone is clamped to a tripod leg. After each shot the preview lands in the corner and one tap saves it to your photo library. Video recording works the same way. ONLY THE CONTROLS THAT REALLY EXIST Aperture, shutter speed, ISO, exposure compensation, white balance, focus mode: the list is built from what the camera permits at that moment. With the mode dial on Intelligent Auto the exposure values are locked, and the app shows them anyway, with a lock icon and a note on what to change. That is more honest than making them disappear. WHAT YOUR CAMERA CAN DO, IN BLACK AND WHITE The range of the Camera Remote API does not depend on the camera model but on the version of the Smart Remote Control app installed on the camera. On the factory version the exposure values are read-only; with the old PlayMemories upgrade they are fully controllable, and that store closed in 2021. So Snap Remote hard-codes no value lists at all. On connect it asks the camera what it implements and builds the interface from the answer. A parameter your camera reports but cannot set appears visible and locked; one it does not know at all does not appear. The Camera Info tab shows you the result: version, API reach and every single function your camera reported. A TIME-LAPSE THAT LISTENS TO THE CAMERA Depending on the subject, a shutter release takes one to three seconds until autofocus, exposure and preview are through. A rigid timer stacks up requests in that window until the camera gives up. Snap Remote waits for the answer instead, subtracts the time spent from the interval and sleeps only the remainder. If a frame takes longer than the interval, the sequence runs as fast as the camera can and the app tells you so. For a time-lapse through the blue hour that is the difference between a sequence and an error message. HONEST ABOUT THE LIMITS No internet needed, and none available: the camera runs its own Wi-Fi and is the router inside it, so iOS will report "No Internet" while you are connected. That is correct. The app keeps the screen awake during intervals and video instead of faking a background mode that iOS would not honour. Intervals below two seconds get unreliable, which is a limit of the camera API, not of the app. There is no access to the memory card: what gets transferred is the preview image the camera offers after each shot, at full JPEG resolution on an upgraded camera. RAW stays on the card. And the camera allows exactly one live view connection, so a second app streaming from it will cut one of you off. COMPATIBLE CAMERAS Any model with the classic Camera Remote API, meaning the ones that run the Smart Remote Control app on the camera. Among others: a7, a7 II, a7R, a7R II, a7S, a7S II, a5000, a5100, a6000, a6300, a6500; RX100 II to RX100 V, the RX10 series, RX0; HX90, WX500; and the FDR-X1000V, FDR-X3000, HDR-AS50 and HDR-AS300 action cameras. Not compatible: a7 III and newer, a9, a1, a7C and the ZV series. Those speak the newer Camera Remote SDK over USB and other protocols, not the Wi-Fi interface Snap Remote is built on. Please check your model against the list above before buying into the idea. NO ACCOUNT, NO TRACKING Snap Remote talks to your camera and to nothing else. There is no account, no server and no analytics.