Remote Legacy vs Cinema P3 Pro Camera

Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5. Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers wireless control and monitoring of your Filmic Pro experience. Filmic Remote puts your spare iOS devices into the production process. Remote v3 offers three modes of capability: Control, Monitor and Director. Control mode provides the familiar Filmic Pro interface for complete remote camera control over hard to reach camera placements such as sliders, jib arms, car mounts, microphone stand or other compelling live event camera placements. Set up your Filmic Pro device and then control all settings and recordings from the Remote: - Start/Stop record functions. - Focus/exposure reticle placement and locking. - Dual arc slider manual controls for focus and exposure. - Pull-to-point focus and exposure pulls. - Create and load Filmic Pro presets from Filmic Remote. Monitor mode gives you cinema production capability for a fraction of the cost, offering a four-up display with the following powerful analytics: - Video preview: Reference video for use with analytics screens. - Waveform monitor: Visually identifies signal brightness segmented from left to right across a video feed. Used in conjunction with the video preview it can provide a quick snapshot of brightness in your video. - Vectorscope: Displays color saturation, by channel, across the entire image. - Histograms: RGB composite, Luminance, Zone and RGB channel. Director mode provides a clean video preview. This is perfect for providing a director, producer or crew with a device to monitor the production remotely. You can switch between modes on the fly to check analytics and composition. Remote can also be set up in ‘preview-only’ mode allowing a camera operator to perform all controls from the device running Filmic Pro and allowing the Remote to be used solely for monitoring. Create your mobile studio today with Filmic Remote! Notes: - The use of Filmic Remote on one iOS device requires the simultaneous use of Filmic Pro on an additional device. Both devices must be running iOS 13 or later. - Filmic Remote connects to Filmic Pro using Wi-Fi either on an established network or using a peer-to-peer network (for using in areas where a Wi-Fi network is not present). - Filmic Remote can connect to any iPhone or iPad running Filmic Pro and is not cross platform.

Cinema P3 Pro Camera unlocks the full capability of your device’s cameras. — Intuitive easy to use controls make taking photos and video a pleasure. — Advanced professional tools allow you to capture the highest quality image every time. FULL CONTROL — Automatic and Manual controls White balance, temperature and tint, exposure, ISO, shutter speed, shutter angle and focus — ISO Priority and Shutter Priority with Spot, Matrix and Center Weight Metering — Manual and Automatic White Balance (AWBc) with Temperature and Tint controls Automatic White Balance calibration using a grey card — Manual Zoom control with adjustable zoom speed for smooth transitions Zoom with a two finger pinch gesture — High Dynamic Range (HDR) Video Capture — Capture 10-bit video with Apple Log*. — Capture 10-bit BT.2020 color (Dolby Vision)*. — Capture HDR video with Hybrid Log Gamma (HLG). — Capture HDR video with C-Log and D-Log. — Capture and playback video with P3 wide color. — Presets to store custom camera settings such as Exposure Mode, White Balance, Video Format and Anamorphic Lens Distortion, Restore a preset with a single tap. ADVANCED TOOLS ● Multiple video recording formats: — 10-bit Apple Log* — 10-bit HLG (Dolby Vision)* — 10-bit 709* — 8-bit P3 HLG — 8-bit P3 — 8-bit 709 ● Full control over video format settings: — Use all Frame Rate, Resolution and Color Spaces supported by your device. — H.265 HEVC, H.264, H.265 4:2:2, ProRes* — Bit Rate, Pixel Aspect Ratio and Key Frame Interval — Time Code Track — 4K Wide Recording Mode ● Powerful full screen and mini scopes, with advanced image processing tools provide real time image analysis. — Luma/Luminance Scope — RGB Parade — RGB Overlay — Histogram. — XY Colorspace — VectorScope — Luma Histogram — (False) Color Analysis ● Tools — Anamorphic Desqueeze with Distortion Correction — Aspect Ratio Guides and Grids assist scene composition. — P3 Button highlights parts of an image that use P3 color. — Anamorphic De-squeeze for 1.3x, 1.55x and custom lenses. — Preserve Camera Settings when changing camera modes — Lock White Balance on Record — Camera Quick Select — Torch — Tilt Sensor — Rotation Lock — Zebras ● Creative Video Mode to optimise and enhance the image in camera: — A-Log & B-Log (SDR) — C-Log & D-Log (HDR) — 33 and 65 point LUT export to convert Log footage to 709, 2020 PQ & 2020 HLG color spaces. — Creative presets with saturation adjustment — .cube LUT support with “LUT Tools Upgrade” In-App Purchase. ● Focus Controls — Continuous Automatic Focus, Manual and Automatic Focus — Face and Animal Detection focus modes. — Focus Target for automatic focus and Focus Lock function — Focus Assist Tool for precise manual focus — Manual focus control with Focus Loupe — Focus peaking ● Audio — Audio level meter — Audio monitoring with headphones — Stereo audio recording on compatible devices — Audio Format selection AAC/LPCM — Manual or automatic microphone selection — Microphone gain control for compatible microphones ● Media Player/Viewer — Photo Viewer with image info display (EXIF, TIFF) — Video Player with track info display (audio, video, timecode) PHOTOGRAPHY ● Full Manual Control for Photos — White Balance, Color Temperature and Tint, Exposure, Shutter Speed, Stabilisation, Flash, Focus, HDR and Red Eye Reduction ● Multiple image formats — Capture photos in HEIC or JPG formats, with optional Live Photo — Custom Aspect Ratio for JPG photos 4:3, 3:2, 5:4, 7:5, 1:1, 16:9, 2.39:1 — RAW, ProRAW* capture — RAW with Bracket capture ● User customisable EXIF Data ● Photo Timer NOTE: *Not all functionality is available on all iOS devices In-App purchase is required to enable some functionality Feature availability is dependent upon model of iPhone/iPad used