PumpWater vs Water Eject

PumpWater is a dedicated tool that pushes water out of iPhone and iPad speakers using precise acoustic signals — after rain, sweat, swimming, pool parties, summer music festivals, or any water exposure. No teardown, no suction tools. The app plays a waveform tuned to the frequency band where the device speaker vibrates most efficiently, driving water droplets out of the grille. ■ How it works iPhone and iPad speakers are sealed air-chamber structures with a natural resonant frequency around 140–200 Hz, depending on the model. PumpWater plays tones in that band so the diaphragm moves at maximum amplitude, and the resulting airflow pushes water droplets clinging to the grille outward. Small droplets held by surface tension don't easily fall off with a simple shake. PumpWater uses acoustic vibration to apply repeated acceleration to the droplets, with a signal designed to deliver the momentum needed to detach them efficiently. ■ Key features - 4 presets · Standard 165 Hz — recommended for most situations · Deep Clean 200 Hz — strong action for deeper water · Fine 145 Hz — gentler with reduced vibration · Auto Sweep 130–220 Hz — sequentially targets droplets of various sizes - Precision frequency slider (20 Hz to 2,600 Hz) — fine-tune by hand - Gyro-linked visualization — tilt your device and the on-screen liquid moves with it, so you can confirm operation at a glance - Hands-free timer (up to 10 minutes) — set it down on a flat surface and walk away - Works in silent mode — unaffected by the ringer/silent switch - iOS 26 Liquid Glass design — automatic light/dark adaptation plus tinted icon support - iPad-specific layout — two-pane design that uses the larger screen - Background usage option — unlock by watching a single rewarded ad (optional) ■ When to use it - Right after your device is exposed to rain, sweat, or pool water - When call audio or speaker output sounds muffled - For routine care after workouts and outdoor activities ■ Tips 1. Place the device on a flat surface with the speaker grille facing down 2. Start with the Standard (165 Hz) preset 3. If results are limited, switch to Auto Sweep to cover the full frequency band 4. Keep each session running for at least 2–3 minutes 5. Lightly shake the device between sessions to drain dislodged droplets 6. After deep submersion, repeat several sessions ■ Safety - Recommended operating band: 100 to 2,000 Hz - For frequencies above 2,000 Hz, lower the volume and keep sessions short to protect your hearing - Avoid combining 80%+ volume with high frequencies for extended periods - Do not place the speaker directly against your ear, and avoid loud playback in public spaces - PumpWater does not repair internal circuitry damage from devices that are already water-damaged. For serious submersion, contact an authorized service center first. ■ Privacy PumpWater does not collect or store your personal data, contacts, location, photos, or microphone input. Only Google AdMob's anonymous identifiers are used to serve ads, and personalized ads can be turned off in the in-app settings. See the in-app privacy policy for details. ■ Ads PumpWater is a free, ad-supported app. - Banner ad at the bottom of the home screen - Interstitial ads before some actions - Background usage is unlocked by watching a rewarded ad (optional) There are no in-app purchases or subscriptions. ■ Compatibility - iOS 18.0 or later - iPhone and iPad supported - iOS 26 Liquid Glass design supported ■ Disclaimer PumpWater is an assistive tool that uses acoustic vibration and does not guarantee complete water removal in every scenario. Results may vary depending on device model, severity of submersion, and how quickly you respond after exposure. This app is a third-party app and is not affiliated with Apple, Inc.

Got water in your phone speaker? Water Eject removes it in seconds. Water Eject uses scientifically-tuned sound frequencies to push water out of your phone speakers, microphone, and charging port. Just tap Start, and powerful sound waves do the rest. HOW IT WORKS When water gets trapped inside your phone speaker, it muffles sound and can cause damage over time. Water Eject generates precise low-frequency tones (165 Hz) that create vibrations strong enough to force water droplets out of tiny speaker grilles and ports. Turn your volume all the way up, place your phone face down, and let the sound waves clear the water. FEATURES Water Eject Mode: One-tap water removal using a proven 165 Hz frequency. Advanced Mode: Multi-frequency ejection sequence (100 Hz to 200 Hz) for deeper, more thorough cleaning. Custom Tone Generator: Full control from 20 Hz to 20,000 Hz, swipe to dial in the exact frequency you need. 5 Vibration Patterns to physically shake water loose from ports and crevices. Works on all phone speakers, earpiece, charging port, and microphone. No complicated setup, just press Start. 5 VIBRATION PATTERNS Gentle: Light continuous vibrations for minor water exposure. Medium: Moderate intensity for everyday splashes. Intense: Maximum power for heavy water contact. Pulse: Rhythmic bursts to dislodge stubborn water. Water Eject: Our specialized 4-phase sequence combining multiple intensities for the best results. PERFECT FOR Phone dropped in water, pool, toilet, or sink. Caught in the rain with your phone. Muffled speaker after a shower or workout. Water stuck in charging port or microphone. Cleaning dust and debris from speakers. WHY WATER EJECT? Instant results, most water is ejected within 15 seconds. No physical tools needed, sound does all the work. Safe for your device, uses acoustic vibrations with no chemicals or physical contact. Beautiful, easy-to-use interface. Works on phone and tablet. Stop waiting for your speaker to dry out on its own. Get water out of your phone now with Water Eject. Privacy Policy: https://meliann.notion.site/Privacy-Policy-For-Water-Eject-243476f8f0418037b7c9f27286ac98fe Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdfula/