Comparison

GateVerb vs Tapko Lift

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

GateVerb

This audio effect plugin offers a stereo reverb with a retro sound. It features pre and post-effect filters for tone shaping and a switchable gate for classic gated reverb or reverse reverb effects in real-time. Adjust size, damping, width, and wet/dry levels for customized audio.

Highlights
  • Stereo reverb with retro vibe
  • Pre and post-effect filters
  • Switchable gate processing
  • Gated reverb emulation
  • Reverse reverb emulation
  • Adjustable reverb size, damping, width
  • Adjustable wet/dry signal levels
Read full description

GateVerb Gated Reverb Plugin (AUv3) GateVerb is an audio effect plugin that can run standalone, or in any AU compatible host application such as Logic Pro or GarageBand. Overview GateVerb is a super-simple and CPU-friendly stereo reverb with a retro vibe. Pre and post-effect filters provide additional tone-shaping, and the switchable gate processing stage allows the recreation of the gated reverb sound made famous on many an 80's hit, as well as an emulation of a "reverse reverb" effect in realtime. And of course, you can simply switch off the gate, for those times when you just need a straightforward no-frills reverb. Controls Active - Toggles the effect On or Off. You can use this control to A/B your settings with the original signal and this will fade gradually between the two with no distracting pops or clicks! Reverb Controls Size - Varies the size of the emulated reverb from a small room to very large hall. Damping - Varies the amount of high frequency damping applied to the reverb tail. As damping is increased, the reverb effect becomes "softer". Width - Sets the stereo spread of the generated reverb from mono, to wide stereo. Wet - Sets the level of the generated reverb, including the filter processing. Dry - Sets the level of the dry / incoming audio signal. Filter Controls HPF - Sets the cutoff frequency of a high-pass filter, which is applied to the signal sent into the reverb processing. LPF - Sets the cutoff frequency of a low-pass filter, which is applied to the output of the reverb processing. Gate Controls Gate - Turns the gate processing stage On or Off. Like the Active control, this is a "soft" switch so you can A/B the effect. The gate processing is applied to the wet / reverb signal only. Smoothing - Sets how fast the gate processing responds to changes in the input signal. Lower settings correspond to a fast response time, whereas higher settings introduce a lag or damping effect to the responsiveness of the gate. Note that the smoothing time also affects the Attack and Release times, so if you need a really slow attack, try increasing the Smoothing too. Threshold - Sets the signal level required to "open" the gate. Note - If set too high, you might not hear any reverb at all, and if set too low, no gating effect will occur as the signal will be loud enough to keep the gate open all the time. Attack - Sets how quickly the gate opens once triggered. At the zero setting, the gate will open immediately, otherwise it opens up gradually, which can be used to create a swell / pseudo-reverse reverb effect. Sometimes, just having a little bit of a swell prevents the reverb from masking the attack of the dry signal which helps retain clarity. Alternatively, ramp-up the attack for spooky vocal effects! Release - Sets how quickly the gate closes after the attack stage. At zero, it will close very quickly, depending on the Response settings. Longer release times can be quite subtle and allows for some fine-tuning of the reverb tail. Somewhere in the middle is the classic 80's drum type gated reverb effect. For more info and support please visit: www.waverley-instruments.com/robjackson

About

Tapko Lift

This audio plugin provides an instant volume boost for live guitar performances on iPhone and iPad. It's designed to make your guitar stand out in the mix without altering your core tone, featuring a simple interface and adjustable boost levels.

Highlights
  • Instant volume lift for solos
  • Tap to latch, hold for momentary boost
  • 0 to +12 dB boost control
  • Three character modes: Lift, Heavy, Reach
  • AUv3 host parameter support
  • Lightweight, focused interface
Features
Read full description

Tapko Lift is a super simple AUv3 guitar boost plugin built for live playing on iPhone and iPad. When it is time for a solo, Tapko Lift gives you instant volume lift without turning your rig into another amp sim or overdrive pedal. It is designed to do one job extremely well: help your guitar step forward in the mix while keeping your core tone intact. Why is it good? - One huge SOLO button for fast live use - Tap to latch, hold for momentary boost - Boost control from 0 to +12 dB - Three subtle character modes: Lift, Heavy, and Reach - AUv3 host parameter support for direct control in hosts like Loopy Pro, AUM, Logic Pro for iPad, Cubasis, and GarageBand - Lightweight, focused interface that is easy to understand in seconds Modes: - Lift: clean level boost with no tone change - Heavy: warmer, bigger solo feel - Reach: tighter low end with more cut in the upper mids Use Tapko Lift after your amp and drive chain for a clean volume jump, or place it before the amp if you want your solo to push the front end harder. Tapko Lift is not an amp simulator, not a full EQ, and not a distortion collection. It is a focused utility pedal for getting heard when the lead moment arrives.

Screenshots

GateVerb4 screens
Tapko Lift1 screens

Verdict

The call

The clearest difference is price: Tapko Lift at Free against GateVerb's $1.99. GateVerb's advantage is device support (4 vs 2) and ratings volume (3 vs 1). On rating, ads, in-app purchases and monetization model there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Tapko Lift is free to download; GateVerb costs $1.99 up front. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

On the App Store both sit at effectively the same score — 5.0 for GateVerb against 5.0 for Tapko Lift. Both are backed by a comparable volume of ratings — 3 and 1 respectively.

Scorecard4 real differences · 6 level
GateVerb versus Tapko Lift: the parameters behind the verdict, then further details
ParameterGateVerbTapko Lift
Price$1.99Free — better
Rating5.0 (3 ratings)5.0 (1 ratings)
Positive reviews100.0% of reviews—
Number of ratings3 — better1
Update frequencyEvery 2 months—
AdsNoNo
In-app purchasesNoNo
MonetizationPaidPaid
DevicesiPhone, iPad, iPod, Mac — betteriPhone, iPad
Requires iOS12.0 — better16.0
Further details — not scored
Size13 MB1 MB
Age rating4+4+
DeveloperRob JacksonDavid Lars Guva

Customer experience

GateVerb

All ratings3 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews1 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

Tapko Lift

All ratings1 ratings
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

GateVerb

No in-app purchases

None

Tapko Lift

No in-app purchases

Questions

Is GateVerb free?
GateVerb costs $1.99, with no in-app purchases.
Is Tapko Lift free?
Tapko Lift is free to download, with no in-app purchases.
Which has better reviews, GateVerb or Tapko Lift?
GateVerb and Tapko Lift are both rated 5.0 out of 5 on the App Store, from 3 and 1 ratings respectively.
Do GateVerb or Tapko Lift have ads?
Neither GateVerb nor Tapko Lift shows ads.

Other comparisons