Comparison

MakerStats 3D Printing Tracker vs Trayce

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

MakerStats 3D Printing Tracker

Track your 3D printing stats, including followers, likes, downloads, and crowdfunding campaigns, all in one place. Monitor model performance, points earnings, and visualize your growth with interactive charts. Get real-time updates and customize your experience with themes and widgets.

Highlights
  • Real-time stats tracking
  • Model performance monitoring
  • Points tracking and currency conversion
  • Crowdfunding campaign analysis
  • Widgets and Live Activities
  • Interactive charts and analytics
  • Background refresh and notifications
Features
Currently charting
Read full description

MakerStats gives MakerWorld creators a dedicated dashboard for tracking their 3D printing stats: followers, boosts, likes, downloads, prints, points, and crowdfunding campaigns, all in one place. REAL-TIME STATS TRACKING See your MakerWorld profile stats update throughout the day. Daily increase counters reset at midnight so you always know how your numbers are growing. Track multiple MakerWorld accounts and switch between them instantly. MODEL PERFORMANCE Monitor every model you've published. See which designs are getting the most downloads, prints, and likes. Spot trending, featured, and exclusive models at a glance with color-coded badges. POINTS TRACKING Log in to your MakerWorld account securely to track your points earnings. See daily point gains, regional gift-card values, and detect withdrawals automatically. Regular points display in your local Points Shop currency (USD, EUR, GBP, JPY, AUD, CAD, KRW, CNY) so the values match what you see on MakerWorld. Exclusive points display in USD to match MakerWorld's creator cashout currency. CROWDFUNDING CAMPAIGNS Track every active, upcoming, and past crowdfunding campaign on your MakerWorld account in one tab. Each campaign card shows total raised, unique backers, total pledges, and today's daily increases. Tap a campaign for the detail page with a cumulative-raised chart you can inspect day by day, plus a reward-tier breakdown showing where pledges are landing. Optional notifications fire when new pledges come in. WIDGETS & LIVE ACTIVITIES Add Home Screen widgets in Small, Medium, and Large sizes to check your stats without opening the app. The Medium widget shows your points alongside the main stats. Enable Lock Screen Live Activities for real-time updates on your Lock Screen and Dynamic Island. CHARTS & ANALYTICS Visualize your growth over time with interactive charts. Choose from 7-day, 30-day, 180-day, and 365-day views to spot trends in your creator journey. Tap any bar in the chart to see the exact values for that day across every metric. BACKGROUND REFRESH Stats update automatically in the background so your numbers stay fresh, even when you haven't opened the app. NOTIFICATIONS Get notified when you hit follower milestones, when one of your models starts trending or gets featured by MakerWorld staff, or when your crowdfunding campaign receives a new pledge. CUSTOMIZE YOUR EXPERIENCE Choose which tab opens when you launch the app. Pick from multiple dark and light themes tuned for OLED screens, including high-contrast and warm variants. PRIVACY FIRST MakerStats has zero analytics, zero tracking, and zero ads. Your data stays on your device. No account required to view public stats. Just enter a MakerWorld username and go. Optional sign-in only when you want to track your private points balance or crowdfunding data. KEY FEATURES • Track followers, boosts, likes, downloads, and prints • Daily increase counters with automatic midnight reset • Monitor individual model performance and badges • Points tracking with region-aware gift-card values • Crowdfunding campaign tracking with charts and tier breakdowns • Home Screen widgets (Small, Medium, Large) • Lock Screen Live Activities and Dynamic Island support • Growth charts with multiple time periods • Tap-to-inspect chart bars across all metrics • Background refresh • Milestone, trending, and pledge notifications • Multi-account support • Configurable default tab on launch • Multiple dark and light themes optimized for OLED • No ads, no tracking, no account required for public stats MakerStats is an independent third-party app and is not affiliated with, sponsored by, endorsed by, or administered by Bambu Lab Limited or MakerWorld. MakerWorld and Bambu Lab are trademarks of their respective owners.

About

Trayce

Easily create custom 3D printable Gridfinity tool inserts from a single photograph. The app automatically traces tool outlines, adjusts pocket sizes, and exports models for 3D printing. All processing is done on-device for privacy.

Highlights
  • Photograph tools for tracing
  • Automatic pocket sizing
  • Customizable pocket depth and fit
  • Two-color or two-part print options
  • Export 3MF and STL files
  • On-device image processing
Features
Read full description

Photograph your tools on a sheet of paper. Get back a Gridfinity insert with a pocket cut to each one, ready to 3D print. No CAD, no calipers, no tracing by hand. THE PAPER IS THE RULER A US Letter page is 215.9 by 279.4 mm, exactly. Once Trayce finds the four corners and undoes the perspective, millimetres per pixel is known rather than estimated - so the pockets come out the size your tools actually are. ONE PHOTO, ONE INSERT Lay the tools out how you want them stored. Take one photo. Trayce traces each outline, places them on the 42 mm Gridfinity grid, cuts a pocket per tool at whatever depth you choose, and adds a finger scallop so you can actually get them out again. PRINT IT IN TWO COLOURS One part, with a single filament change so the tool shapes show up in a second colour. Or two parts - a tray plus a thin coloured inlay for each pocket, printed separately and dropped in, with no filament change at all. ADJUST WHAT MATTERS Snug, just right or loose. Per-tool depth. Finger notch size. Keep your layout or pack it tight to save plate. Save a setup and every insert after it comes out the same. EXPORTS 3MF, STL AND STEP Both parts with their colours, in millimetres, ready for OrcaSlicer, Bambu Studio, PrusaSlicer or Cura. STEP files open straight in Fusion, Onshape or any CAD app if you want to edit the insert further. MAGNETS AND LABELS Turn on magnet holes (four per bay, for 6 x 2 mm magnets) to lock the insert into your baseplate. Add a raised size label, or leave the top plain. YOUR PHOTOS STAY ON YOUR PHONE Every bit of the image work happens on the device. No photo, outline or model is ever uploaded. Trayce Unlimited starts with a 3-day free trial, then $2.99 a week or $99.00 a year. Cancel any time before the trial ends and you are not charged. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Screenshots

MakerStats 3D Printing Tracker4 screens
Trayce4 screens

Verdict

The call

The clearest difference is review sentiment: MakerStats 3D Printing Tracker at 83% against Trayce's 0%. MakerStats 3D Printing Tracker also leads on rating (4.8 vs 3.0) and in-app purchases (none vs 2). Trayce's advantage is price (Free vs $9.99). On device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Trayce is free to download; MakerStats 3D Printing Tracker costs $9.99 up front. Trayce sells 2 in-app purchases, starting at $2.99 per 7 days. MakerStats 3D Printing Tracker asks for nothing beyond the download.

ReceptionRating · Positive reviews · Number of ratings

MakerStats 3D Printing Tracker holds the better App Store score, 4.8 against 3.0. Both are backed by a comparable volume of ratings — 4 and 1 respectively. Written reviews point the same way: 83% of MakerStats 3D Printing Tracker's written reviews are positive against 0% of Trayce's.

UpkeepUpdate frequency

MakerStats 3D Printing Tracker ships an update every 5 days, Trayce every 2 weeks. The most recent releases landed on November 17, 2026 and November 15, 2026 respectively.

Scorecard9 real differences · 2 level
MakerStats 3D Printing Tracker versus Trayce: the parameters behind the verdict, then further details
ParameterMakerStats 3D Printing TrackerTrayce
Price$9.99Free — better
Rating4.8 (4 ratings) — better3.0 (1 ratings)
Positive reviews83.3% of reviews — better0.0% of reviews
Number of ratings4 — better1
Update frequencyEvery 5 days — betterEvery 2 weeks
AdsNo — betterYes
In-app purchasesNo — betterYes
MonetizationPaidFree with in-app purchases — better
Best chart rank#194 — better—
DevicesiPhone, iPadiPhone, iPad
Requires iOS17.017.0
Further details — not scored
Size34 MB18 MB
Age rating4+4+
DeveloperAleksei AdzhemFlayr Labs LLC

Customer experience

MakerStats 3D Printing Tracker

All ratings4 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews6 reviews
Positive83.3%
Neutral16.7%
Negative0.0%

Trayce

All ratings1 ratings
Positive0.0%
Neutral100.0%
Negative0.0%
Written reviews1 reviews
Positive0.0%
Neutral100.0%
Negative0.0%

In-app purchases

None

MakerStats 3D Printing Tracker

No in-app purchases

2 purchases

Trayce

Subscriptions2
  • Weekly3 Days trial$2.997 Days
  • Yearly3 Days trial$99.001 Year

Questions

Is MakerStats 3D Printing Tracker free?
MakerStats 3D Printing Tracker costs $9.99, with no in-app purchases.
Is Trayce free?
Trayce is free to download, with in-app purchases available.
Which has better reviews, MakerStats 3D Printing Tracker or Trayce?
MakerStats 3D Printing Tracker is rated higher. MakerStats 3D Printing Tracker averages 4.8 out of 5 from 4 ratings, while Trayce averages 3.0 from 1 ratings.
Do MakerStats 3D Printing Tracker or Trayce have ads?
Trayce shows ads; MakerStats 3D Printing Tracker does not.
Which is updated more often, MakerStats 3D Printing Tracker or Trayce?
MakerStats 3D Printing Tracker ships an update every 5 days, and Trayce every 2 weeks. Most recently, MakerStats 3D Printing Tracker was updated on November 17, 2026 and Trayce on November 15, 2026.

Other comparisons