Comparison

PeakG vs Pull

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

PeakG

This app transforms your iPhone and Apple Watch into a G-force meter, tracking real-time forces, speed, and altitude. Record sessions, analyze peak values, and export your data as CSV files for detailed review.

Highlights
  • Real-time G-force, speed, and altitude monitoring
  • Standalone Apple Watch session recording
  • Post-session analysis of peak and average values
  • Interactive timeline graphs
  • CSV data export
  • Customizable units (speed and altitude)
Features
Read full description

PeakG turns your iPhone and Apple Watch into a G-force meter and recorder. See the load you feel, live, then review every moment on zoomable charts and a GPS track map. Built for pilots and track drivers, and for anyone curious about the forces on a rollercoaster, a ski run or a bike trail. THREE MODES • Everyday: total G, the load you feel, wherever the phone sits. Rollercoasters, rides, runs and trails. • Car: grip in words, like "Braking 0.82 g" and "Right turn 0.91 g", on a grip circle. Mount the phone any way up; PeakG learns which way is forward from GPS. • Flight: signed load factor, from +4.2 g into the seat to −1.1 g out of it, with climb rate and altitude. Tap Set level in straight and level flight, or let Auto level work it out. READINGS THAT MATCH WHAT YOU FEEL A shaken phone can spike past 10 g for a few hundredths of a second. You never feel that, so PeakG doesn't count it: the sensors run at 100 Hz and are smoothed with the 5 Hz filter used to evaluate rollercoaster forces (ASTM F2291). The display stays steady while the recording keeps the detail. Prefer the raw signal? It's one setting away. The one-minute Sensor check shows how accurately your phone reads. RECORD AND REVIEW • One tap to record; iPhone keeps recording with the screen locked • One large chart per channel: pinch to zoom, pan and scrub • One large chart per channel: pinch to zoom, pan and scrub • Highlights jump straight to the hardest moments • GPS track map coloured by G-force • Peak G, time above your threshold, speed, distance, altitude and climb rate • Optional haptic alert when you pass your G threshold • Crash-safe: if PeakG is closed mid-recording, everything up to that moment is kept APPLE WATCH Record on your wrist without your iPhone, in all three modes. Sessions are sent to your iPhone automatically, even when PeakG isn't open on either device, and the Watch keeps each one until your iPhone confirms it. Units, modes and alerts stay in sync. EXPORT EVERYTHING CSV with real timestamps, full JSON, or GPX for mapping tools. Export a whole session, just the part you've zoomed in on, or several sessions at once. Save a reading anywhere from every 10 ms to every second. YOUR UNITS Speed in km/h, mph, knots or m/s. Altitude in metres or feet. PRIVATE BY DESIGN No account, no analytics, no ads. Your sessions stay on your devices until you choose to export them. DESIGNED FOR • General aviation and aerobatic pilots • Track days, karting and autocross • Skiers, snowboarders and mountain bikers • Rollercoaster and thrill ride fans • Anyone curious about the forces in everyday life PeakG is for recreation and analysis, not a certified instrument. Never handle your phone while driving, flying or riding, and always secure it so it can't come loose. Start recording. See what you feel.

About

Pull

This app displays real-time acceleration and braking forces experienced while driving. It provides a live telemetry view to help drivers understand their vehicle's dynamics and driving smoothness.

Highlights
  • Real-time acceleration monitoring
  • Real-time braking force monitoring
  • Live telemetry experience
  • Vehicle dynamics analysis
  • Driving smoothness feedback
Features
Read full description

Pull turns your iPhone into a live longitudinal g-force meter for driving — every push into your seat and every dive into the belt, traced the instant it happens. Runs quietly catches every launch and roll while you drive, so a quarter-mile just gets banked without ever tapping a stopwatch. New in 1.3.1: made for iPhone Duo. FEATURES • Live G-force readings for acceleration and braking • Real-time scrolling telemetry chart with drag-to-explore review • Peak acceleration and braking captured on every drive • Runs — set a roll or launch from a stop, floor it, and Pull banks your 60-foot, 0–60, and quarter-mile automatically. No button, no countdown • History — every banked run files itself in a logbook you never wrote • Records — your personal bests across every measure, one trophy shelf • Garage — add your cars, and every run is stamped with the one you set it in. Each car remembers its own dash color • Share any peak, whole ride, or banked run as a clean card — or save a run straight to Photos • Made for iPhone Duo — readings on the cover display, a split meter held tall, a full-width trace held wide • Ten dashboard tints — pick what reads cleanest against your dash • Follows your region for miles or kilometres — flip whenever you like • Automatic setup — no calibration step; it learns your direction of travel as you drive • Works in any mount or orientation — dashboard, vent, or a flat console charger HOW IT WORKS Pull uses your iPhone's motion sensors and your direction of travel to measure longitudinal acceleration accurately. It works the moment you start moving and sharpens within seconds — no calibration step and no fixed mounting position. While you drive, Runs watches quietly in the background. Set a roll or come to a stop and launch, and Pull times it against your true from-crossing — no stopwatch to tap, no countdown to fumble. You decide it was a run after the run. Ordinary driving stays silent. Location is used only to sense the direction of travel. It's processed entirely on your device and never leaves it. Place your phone in any mount — dashboard, vent, or a flat charging pad — open Pull, and drive. GREAT FOR • Enthusiasts who want their 60-foot, 0–60, and quarter-mile without fuss • Drivers working on smoother acceleration and braking habits • Exploring how a car pulls, brakes, and settles across a drive • Anyone who's ever wished the pull they just made had been timed PRIVACY Your measurements, location, and drive data stay on your device and are never uploaded to the cloud. Pull does not collect, store, or share your personal data. No account. No signup. No internet connection required. QUICK START 1. Place your iPhone in any mount in your vehicle 2. Open Pull and allow Location access 3. Drive and watch live acceleration data update in real time 4. Review your session history and telemetry afterward IMPORTANT Pull measures longitudinal acceleration only (forward and backward motion). Always drive responsibly and obey local traffic laws. Never operate the app in a way that distracts from safe driving.

Screenshots

PeakG4 screens
Pull4 screens

Verdict

The call

The clearest difference is update cadence: Pull at fortnightly against PeakG's every 10 months. Pull also leads on rating (5.0 vs 4.6). On price, ratings volume, ads and in-app purchases there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

Pull holds the better App Store score, 5.0 against 4.6. Both are backed by a comparable volume of ratings — 5 and 2 respectively.

UpkeepUpdate frequency

PeakG ships an update every 10 months, Pull fortnightly. The most recent releases landed on November 15, 2026 and October 31, 2026 respectively.

Scorecard2 real differences · 8 level
PeakG versus Pull: the parameters behind the verdict, then further details
ParameterPeakGPull
PriceFreeFree
Rating4.6 (5 ratings)5.0 (2 ratings) — better
Positive reviews33.3% of reviews—
Number of ratings5 — better2
Update frequencyEvery 10 monthsFortnightly — better
AdsNoNo
In-app purchasesNoNo
MonetizationFreeFree
DevicesiPhone, Apple Watch — betteriPhone
Requires iOS18.517.6 — better
Further details — not scored
Size5 MB2 MB
Age rating4+4+
DeveloperPixel ManagementCarl Sieber

Customer experience

PeakG

All ratings2 ratings
Positive0.0%
Neutral100.0%
Negative0.0%
Written reviews3 reviews
Positive33.3%
Neutral66.7%
Negative0.0%

Pull

All ratings2 ratings
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

PeakG

No in-app purchases

None

Pull

No in-app purchases

Questions

Is PeakG free?
PeakG is free to download, with no in-app purchases.
Is Pull free?
Pull is free to download, with no in-app purchases.
Which has better reviews, PeakG or Pull?
Pull is rated higher. PeakG averages 4.6 out of 5 from 5 ratings, while Pull averages 5.0 from 2 ratings.
Do PeakG or Pull have ads?
Neither PeakG nor Pull shows ads.
Which is updated more often, PeakG or Pull?
PeakG ships an update every 10 months, and Pull fortnightly. Most recently, PeakG was updated on November 15, 2026 and Pull on October 31, 2026.

Other comparisons