GridLab EMS vs BMS Pal
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
GridLab EMS
Read full descriptionHide full description
GridLab EMS - система керування енергією промислових об'єктів: накопичувачі (BESS), сонячні станції, газопоршневі установки (ГПУ) і дизель-генератори. Уся станція, план автоматики, ринок РДН і відключення в одному телефоні. СТАНЦІЯ НАЖИВО • 3D-модель станції: батарея, сонце, ГПУ, дизель-генератор і мережа на одному екрані • Потоки енергії між мережею, батареєю, генерацією і навантаженням • Облік станції за день, тиждень і місяць • Телеметрія: SOC, потужність, напруга, струм і температура ГЕНЕРАЦІЯ • Сонячна станція: факт генерації, години сонця, заряд батареї від сонця і віддача в мережу • ГПУ: генерація і її потоки в балансі станції • Дизель-генератор: потужність, частота, положення АВР, заряд батареї від генератора і ліміт навантаження КЕРУВАННЯ • Автоматика за планом або ручна команда: потужність і цільовий SOC • Ручний графік власного арбітражу з полями «Потужність» і «Ємність» • Налаштування і картки показують лише те, що потрібно режиму вашої станції • Острівний режим: живлення від батареї і генератора під час відключень, одна потужність на всі шафи острова ПЛАН І РИНОК РДН • Погодинний план заряду і розряду за цінами РДН з урахуванням сонця • Прогноз навантаження парку з ручним виправленням • Ціни РДН по годинах: найдешевші й найдорожчі години видно одразу • Аналітика ринку: мінімум, максимум, порівняння із завтра і найкращі вікна ГРАФІК ВІДБОРУ/ВІДПУСКУ • Доби, сальдо і погодинний графік • Акцепт графіка паролем операцій • Звіт Д+1: план, факт і відхилення ЖУРНАЛ І ГРОШІ • Сесії заряду і розряду, зокрема від генератора: енергія і гроші за кожну • Ціна, витрати, економія і продаж без ПДВ та з ПДВ • Зведення за день, тиждень, місяць або вибрані дати • Журнал подій: аварії BMS і PCS, автоматичне відновлення, скидання аварії з екрана ВІДКЛЮЧЕННЯ • Графіки відключень у вашому регіоні і стан доби • Аварійні відключення і години можливих відключень під час перемикань • Сповіщення заздалегідь СПОВІЩЕННЯ І ВІДЖЕТИ • Push-сповіщення про аварії, відключення, графік і роботи на станції • Віджети на головному екрані: заряд і стан батареї без відкриття застосунку БЕЗПЕКА • Біометричний вхід • Шифроване з'єднання і захист застосунку • Система керування інформаційною безпекою за ISO/IEC 27001:2022 Інтерфейс українською, англійською і румунською. Для роботи потрібен обліковий запис GridLab EMS і підключена станція; ознайомитись можна в демо-режимі. Підтримка: support@gridlab.com.ua
BMS Pal
Consolidate data from various battery management systems into a single, live list. Monitor state of charge, voltage, current, and more with detailed per-cell views and historical charts. Offers advanced features like capacity testing and AI-powered sanity checks for your battery packs.
- Live telemetry from multiple BMS
- Per-cell voltage and balancing indicators
- Protection alerts in plain language
- Group packs for combined readings
- Capacity test and history logging
- Chemistry detection and override
- AI-powered sanity checks
Read full descriptionHide full description
All your batteries. One app. A JBD pack in the garage, a Victron in the van, a power station on the table - and a different vendor app for each one. BMS Pal ends the app-hopping: every pack you own in one live list, with state of charge, voltage, current, watts, and time remaining. Device detail pages have tools for a deep dive into your devices. Up to eight connected at once. EIGHT FAMILIES AT LAUNCH BMS boards get the deep treatment - per-cell voltages with live balancing indicators, protection alerts, chemistry detection, configuration reads, and confirmation-gated FET control: - JBD (including XiaoXiang and legacy variants) - JK - Daly Battery monitors and power stations get their essentials, with the same charts and history: - Victron (including encrypted advertising) - Junctek KL-F shunt monitors - Bluetti, Jackery, and EcoFlow power stations Coverage varies by family - the full who-reports-what table is at bmspal.app. WHAT IT DOES - Live telemetry: voltage, current, power, temperature, and state of charge stream in as your BMS reports them. Charts hold the last week, so you can see what happened while you slept. - Per-cell detail: every cell gets its own bar, down to the millivolt. Cells the BMS is balancing light up, so you can watch the spread tighten in real time. - Alerts, plainly stated: protection events appear in plain language. No sirens, no red flashing. Just the facts. - Groups: packs that work as one bank read as one battery. Group them series, parallel, or series-parallel and get combined voltage, current, and state of charge. - Capacity tests: run a real discharge test on any pack that reports current. BMS Pal integrates it over time against your cutoff and files the result in the pack's history, so "how many amp-hours, really?" gets a measured answer. - Chemistry detection: BMS Pal reads your protection thresholds and works out whether the pack is LiFePO4 or Li-ion. You can override it - you know your pack best. - Sanity Checks: not sure those numbers are fine? Send a snapshot of your pack for an AI review across six dimensions and get a written verdict back - findings graded by severity, with the reasoning and trade-offs spelled out. You see exactly what is sent before anything leaves your phone, and nothing is sent until you tap. BMS boards only, where the setup can actually be changed. - Write mode, off by default: toggling charge or discharge FETs is serious business on a high-energy pack. Writes sit behind a master switch plus a per-command confirmation, and every attempt is logged. LOCAL-FIRST. ACTUALLY LOCAL. No account, ever. No analytics, no trackers, no background traffic. Your telemetry history lives on your device; delete the app and it is gone. The only network calls are the ones you explicitly ask for (a Sanity Check or a problem report), and you see the exact payload first. THE DEAL Free download, and everything works for 7 days - every protocol, every feature, no card up front. Then $5 unlocks it for good: one purchase, no subscription, no "premium tier" holding features hostage. Sanity Checks run in the cloud and cost real server money, so the app includes 25 and $2 adds 25 more. Everything else runs entirely on your device. ONE DEVELOPER, ONE BENCH Every supported family sits on my bench: 92 wire-protocol variants documented, 1,100+ automated tests in the suite. Got a pack that will not identify, a value that reads wrong, or a feature idea? Report a Problem, Confirm Device Support, and Send Feedback are built in, replies land in your Support inbox, and none of it is ever paywalled. Your reports steer the roadmap. Runs on iPhone, iPad, and Apple Silicon Macs. JBD, XiaoXiang, JK, Daly, Victron, Junctek, Bluetti, Jackery, and EcoFlow are trademarks of their respective owners. BMS Pal is an independent project, not affiliated with or endorsed by any battery vendor. BMS Pal shows you what your BMS reports; it is not a substitute for proper fusing, wiring, and common sense.
Screenshots
Verdict
The clearest difference is in-app purchases: GridLab EMS at none against BMS Pal's 2. GridLab EMS also leads on update cadence (daily vs every 5 days) and iOS requirement (15.0 vs 26.2). On price, ads and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. BMS Pal sells 2 one-off in-app purchases. GridLab EMS asks for nothing beyond the download.
GridLab EMS ships an update daily, BMS Pal every 5 days. The most recent releases landed on November 15, 2026 and November 6, 2026 respectively.
| Parameter | GridLab EMS | BMS Pal |
|---|---|---|
| Price | Free | Free |
| Rating | — | 5.0 (1 ratings) — better |
| Positive reviews | — | 100.0% of reviews |
| Number of ratings | — | 1 — better |
| Update frequency | Daily — better | Every 5 days |
| Ads | No | No |
| In-app purchases | No — better | Yes |
| Monetization | — | Free with in-app purchases |
| Devices | iPhone, iPad, iPod — better | iPhone, iPad |
| Requires iOS | 15.0 — better | 26.2 |
| Further details — not scored | ||
| Size | 82 MB | 25 MB |
| Age rating | 4+ | 4+ |
| Developer | Maksym Kovalov | Inquiring Minds, Inc |
In-app purchases
GridLab EMS
No in-app purchases
BMS Pal
- 25 Additional Sanity Checks$2.00
- BMS Pal Unlock (Lifetime)$5.00









