CarCoding vs TScanPro

CarCoding is a vehicle fault diagnosis and ECU coding app for ELM327 OBD2 scanners. Read and clear fault codes, view live data, reset service indicators, inspect used vehicles, and unlock hidden features — all in one OBD2 app. Plug in a Bluetooth (BLE) or Wi-Fi adapter, connect to your vehicle's control units in seconds. Find out why the check engine light is on, clear fault codes, watch live data, unlock hidden features. ▸ OBD2 DIAGNOSTICS • FAULT CODE READING AND CLEARING (DTC) Read and clear OBD2 fault codes — standard P-codes plus manufacturer-specific B, C and U codes. Engine, transmission, ABS, airbags and body modules in a single scan. Descriptions in plain language. • AI FAULT ANALYSIS What does "P0420" mean? Built-in AI explains the likely cause, urgency and what to check first — no jargon. • LIVE ENGINE ANALYSIS Measure fuel trim and oxygen sensor response at idle and under load; the app diagnoses vacuum leaks, fuel supply issues and sensor faults from the numbers. • USED CAR CHECK AND INSPECTION READINESS Were fault codes cleared before sale? Permanent fault codes, readiness monitors and distance driven since codes were cleared on one screen. Mode 06 tests give early warning before a fault code is set. ▸ LIVE DATA AND GAUGES • DIGITAL GAUGE PANEL Track RPM, coolant temperature, oil temperature, boost pressure, fuel trim and battery voltage in real time. Design your own gauges, record drives, export OBD2 logs. • TRIP COMPUTER AND PERFORMANCE TEST Real-time and average fuel consumption, trip cost, distance and speed summary. Measure 0-100 km/h, quarter-mile and braking tests on closed track. • BATTERY, HYBRID AND DPF HEALTH Check battery health from the voltage drop while cranking. Battery status on hybrids and EVs; DPF differential pressure, regeneration status and AdBlue level on diesels. ▸ SERVICE RESET AND MAINTENANCE • OIL, EPB, DPF, SAS AND TPMS RESET Oil change reset, electric park brake (EPB) service mode, DPF regeneration, steering angle sensor (SAS) calibration and TPMS reset — with pre-flight RPM and voltage checks. • ACTUATOR TEST AND EXTENDED SENSORS On supported models, start and stop actuators directly from the app. Read vehicle-specific signals: charge percentage, module temperatures, oil life and more beyond standard OBD2. ▸ ECU CODING AND HIDDEN FEATURES • CODING Read and back up ECU coding data, then switch hidden factory features on or off: mirror folding on lock, seatbelt chime, gauge sweep, headlight behavior. Expert Mode offers direct hex/byte access. • BRAND SUPPORT The most complete coding support is on BMW and MINI. Long coding and adaptation on VW, Audi, Skoda, Seat and Cupra; telecoding on Peugeot, Citroën, DS and Opel; module coding on Ford, Fiat, Alfa Romeo, Jeep, Renault and Dacia; reading and analysis on Hyundai, Kia, Toyota and many more brands. Options vary by model. ▸ MORE • MOTORCYCLE AND TRUCK DIAGNOSIS K-line fault diagnosis and live data on motorcycles; active and historical faults plus live values over J1939 on trucks and buses. • REMOTE SUPPORT Open a support session from within the app; our team inspects your vehicle live through your phone. • 32 LANGUAGES Interface, fault code descriptions and coding labels in 32 languages. • COMPATIBILITY All OBD2-compliant vehicles (gasoline 2001+, diesel 2004+); quality ELM327 Bluetooth and Wi-Fi adapters. ▪ Coding and service resets write data to control modules. CarCoding backs up your data first — keep the ignition on and stay connected during the process. OBD2 scanner, car diagnostic tool and coding tool in one app. Download CarCoding. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://carcoding.app/privacy.html

T‑Scan Pro turns a compatible ELM327 Bluetooth Low Energy or Wi‑Fi adapter into a focused vehicle dashboard and diagnostics companion. Built around the 2019 Toyota LandCruiser Prado 150 2.8L turbo-diesel, T‑Scan Pro combines live telemetry, trip recording and Prado-specific diagnostic guidance in one clear interface. LIVE VEHICLE DASHBOARD • View speed, RPM, coolant temperature, intake temperature, boost, voltage, engine load, fuel rate and other readings when supported by the connected ECU. • Build and rearrange the dashboard around the data that matters to you. • Use the included demo simulator to explore the app without an adapter. HONEST DATA COMPATIBILITY • Supported Data Scan checks the ECU’s advertised OBD‑II capability maps. • Unsupported or unverified values are clearly shown as unavailable instead of being displayed as invented zeroes. • Diesel-specific petrol PIDs such as STFT, LTFT and conventional O2 readings are identified appropriately. PRADO DIAGNOSTICS • Organised coverage for engine and diesel emissions, DPF and exhaust, fuel and injectors, turbo and intake, transmission, 4WD, ABS/VSC and body or safety modules. • Read trouble codes, emissions readiness and available live data. • Run read-only Prado discovery to identify available modules and data safely. • Export diagnostic reports for your records or workshop. VEHICLE HEALTH • See a health score with evidence, confidence and prioritised findings. • Track maintenance items and retain historical reports. SMART ALERTS AND TRIPS • Configure coolant, boost and low-voltage warnings, including background notifications while the adapter remains connected. • Record GPS routes, trip history and live telemetry. • Export trip data and keep automatic backups in iCloud Drive. Actual readings depend on the vehicle, ECU calibration and adapter. Toyota-enhanced values such as DPF soot load, differential pressure, regeneration state, exhaust-gas temperatures and injector feedback require verified support for the connected vehicle and are never fabricated. T‑Scan Pro is a diagnostic companion and does not replace professional inspection or repair advice.