Spectrum Analyzer+ Audio FFT vs TimeStamp

Spectrum Analyzer+ Audio FFT shows the live frequency spectrum of any sound your iPhone microphone hears, then lets you capture a 5-second average and read the result: the strongest frequency in Hz, the top components and where the energy sits. ▶ See the spectrum live • 32 bands from 20 Hz to 20 kHz, computed with a 2048-point FFT • Four views: Bars with peak hold, Line, Waterfall and Spectrogram • Peak frequency and peak level update as you listen • Min / Max traces in the Bars view, tap a bar for a cursor readout, freeze the display to study it • Adjustable dB range from 30 to 120 dB ▶ Capture 5 seconds, get an answer Tap Capture 5 s under the graph and hold the sound steady. The app power-averages the spectrum over five seconds and shows a result card: • Strongest component in Hz, with the musical note and cents in Voice mode • Up to three top components with their levels • Share of the detected energy in the low, mid and high part of the selected range • Strongest band level and the FFT resolution of the measurement If the sound is too quiet in that range, the card says so instead of inventing a peak. ▶ Compare before and after Save a capture as a reference (up to 10). Make a change — move a speaker, add treatment, adjust a machine — capture again in the same mode and the card shows the average band-level difference in dB. References can also be overlaid on the live spectrum. ▶ Pick the job • Voice: 80–4000 Hz, shows the note of the strongest pitch • Machine: 20–2000 Hz, looks for 50/60 Hz mains hum and its harmonics • Room: 20–500 Hz, the low end where room modes build up ▶ Export and share • Export a CSV of the live spectrum or of a 5-second capture • Share a short text summary of a capture ▶ Extras • Calibration offset from −20 to +20 dB in 0.5 dB steps to line up with a reference meter • Pink noise generator, unlocked for 24 hours by watching a short ad • Interface in 30 languages ▶ Good to know Levels are relative to the microphone's full scale (dBFS). A phone microphone is not a certified sound level meter, so use the numbers to find frequencies and compare changes, not for compliance measurements. Audio is analysed in memory while you listen and is not saved as a recording. For musicians checking a tone, home studio and hi-fi owners chasing a boomy note, and anyone tracking down a hum from a fridge, fan or transformer.

TimeStamp is a camera that stamps the date, time and place onto your photos — every feature free. Shoot once and the date, time and address are burned into the image itself, not hidden metadata that can be stripped. Built for inspections, field work, maintenance, insurance and work reports. - Simple stamp, top right Date & time · province/state · district + postcode · country, in clean white text like your phone's camera. - Detailed info stamp Organization, photo number, GPS coordinates, accuracy, altitude, compass heading, notes and a mini map, with color themes. - Stamp templates Save several stamp setups — e.g. "Inspection" and "Personal" — and switch with one tap from the camera. - Address that matches where you shot The app waits for a fresh address before stamping and never reuses an old one. If it can't get one in time, it tells you. - Stamp many old photos at once Pick up to 50 photos; each one uses its own original date, time and place automatically. - Neatly organized Photos go to a "TimeStamp" album with date, time and GPS in the photo's metadata, so they appear on the map in Photos. - Transparent Time is checked against the network, and if you choose a manual time the stamp always says "time set manually". - Easy to use Big buttons, clear text, unlimited shots. Thai and English. Every feature is free, with small ads that never cover the camera. No in-app purchases, no sign-up. Your photos stay on your device.