Spectrum Analyzer+ Audio FFT vs Live Spectrum Analyzer

Spectrum Analyzer+ Audio FFT shows the live frequency spectrum of any sound your iPhone microphone hears, then lets you capture a 5-second average and read the result: the strongest frequency in Hz, the top components and where the energy sits. ▶ See the spectrum live • 32 bands from 20 Hz to 20 kHz, computed with a 2048-point FFT • Four views: Bars with peak hold, Line, Waterfall and Spectrogram • Peak frequency and peak level update as you listen • Min / Max traces in the Bars view, tap a bar for a cursor readout, freeze the display to study it • Adjustable dB range from 30 to 120 dB ▶ Capture 5 seconds, get an answer Tap Capture 5 s under the graph and hold the sound steady. The app power-averages the spectrum over five seconds and shows a result card: • Strongest component in Hz, with the musical note and cents in Voice mode • Up to three top components with their levels • Share of the detected energy in the low, mid and high part of the selected range • Strongest band level and the FFT resolution of the measurement If the sound is too quiet in that range, the card says so instead of inventing a peak. ▶ Compare before and after Save a capture as a reference (up to 10). Make a change — move a speaker, add treatment, adjust a machine — capture again in the same mode and the card shows the average band-level difference in dB. References can also be overlaid on the live spectrum. ▶ Pick the job • Voice: 80–4000 Hz, shows the note of the strongest pitch • Machine: 20–2000 Hz, looks for 50/60 Hz mains hum and its harmonics • Room: 20–500 Hz, the low end where room modes build up ▶ Export and share • Export a CSV of the live spectrum or of a 5-second capture • Share a short text summary of a capture ▶ Extras • Calibration offset from −20 to +20 dB in 0.5 dB steps to line up with a reference meter • Pink noise generator, unlocked for 24 hours by watching a short ad • Interface in 30 languages ▶ Good to know Levels are relative to the microphone's full scale (dBFS). A phone microphone is not a certified sound level meter, so use the numbers to find frequencies and compare changes, not for compliance measurements. Audio is analysed in memory while you listen and is not saved as a recording. For musicians checking a tone, home studio and hi-fi owners chasing a boomy note, and anyone tracking down a hum from a fridge, fan or transformer.

Live Spectrum Analyzer is a real-time audio visualization tool for musicians, students, teachers, sound makers, and anyone who wants to see sound clearly. Use the microphone for live input, or import an audio file from Files to inspect how frequency, amplitude, pitch, and dynamics change over time. Switch between waveform, FFT, sonogram, spectrum bars, VU meter, pitch, octave bands, peak hold, envelope, waterfall, phase, Lissajous, and XY Scope views. Each mode is designed for quick visual reading while you listen, tune, practice, demonstrate acoustics, compare sounds, or check a recording. The app also provides practical analysis readouts, including RMS, peak level, decibels, detected pitch, strongest frequency peaks, spectral centroid, zero crossing rate, dynamic range, estimated BPM, beat strength, mel bands, chroma, noise floor, and clipping status. Results are intended as helpful visual references rather than certified measurement data. Key features: • Live microphone waveform and spectrum visualization • Import audio files for playback and local visual analysis • Waveform, FFT, sonogram, bars, VU, pitch, waterfall, phase, and scope modes • Adjustable gain, time window, FFT floor, sonogram brightness, contrast, and speed • Pitch reference, tolerance, microphone gain, and noise gate settings • Record audio locally, review saved recordings, and share or delete files • Capture visualization snapshots as PNG images • Local-first workflow with no account required Subscription and purchase information: The app offers a free experience and optional Pro access. Actual prices, trials, promotions, and availability are shown in the App Store. Privacy and data information: Your microphone input, imported audio, recordings, snapshots, and analysis results stay on your device by default. The app does not require an account and does not upload your media to a server operated by us. Privacy Policy: https://sites.google.com/view/livespectrumanalyzer/home/privacypolicy Terms of Use: https://sites.google.com/view/livespectrumanalyzer/home/term_of_use Contact: gongchengyong70@gmail.com